CM9 (ICS) /CM10 (Jelly Bean) /Paranoid Android (JB) and TWRP for ZTE V11A/V71A/V55

DEVELOPMENT FINISHED , NO MORE NEW BUILDS

I have changed my SmartTab to a Galaxy Tab 2 10.1 so I have finished development for SmartTab. All my existing roms will be accessible as well as source code on my github.


I have started to port CM9 ICS and CM10 Jelly Bean and Paranoid Android to Vodafone SmartTab .
The rom is in beta stage , so there are bugs and non working components.Use it for your own responsibility.



CM and PA Project Sources on Github
Kernel Sources can be found under kernel/zte/newkernel.zip in each project on my github.

Paranoid Android Jelly Bean (Android 4.1.2) actual release 2012.11.04

Credit Goes to Paranoid Team









What is working :
-hw acceleration
-WI-FI (Both on 2.4 GHz and on 5GHz too)
-touchscreen
-gps
-audio
-3G data
-Setting of cpu clock and governor from settings (performance settings) The max OC is as in #60 .
-tmobile theme engine
-USB
-Lagfree and Savagedzen CPU governors added
-New RIL
-Voice Calls
-Bluetooth
-Tethering over Bluetooth
- Wifi hotspot
-Tethering over USB
- Possible to turn on wifi in airplane mode.
- Deep Sleep (only in airplane mode)


What is not working :
-Camera
-CDMA data on Optik

Bugs :


Download link for 2012.11.04 build for SmartTab7 (ZTE V71A):
Paranoid Android for SmartTab7
Download link for 2012.11.04 build for SmartTab10 (ZTE V11A):
Paranoid Android for SmartTab10
Download link for 2012.11.04 build for Sprint Optik (ZTE V55):
Paranoid Android for Optik


Google Apps (2012.07.26)

Google Apps (2012.07.22) with working Picasa Sync

CM9 ICS (Android 4.0.4) actual release 2012.09.11

Credit Goes to CyanogenMod Team

What is working :
-hw acceleration
-wifi
-touchscreen
-gps
-audio
-voice calls
-3G data
-Setting of cpu clock and governor from settings (performance settings) The max OC is as in #60 .
-tmobile theme engine
-USB (mtp, adb, tether)
-Lagfree , Savagedzen CPU governors added
-New RIL
-Bluetooth
- Wifi hotspot
-Tethering over USB

What is not working :
-CDMA data on Optik
-Camera

Bugs :
- Deep sleep work only in airplane mode .
- No sound in BT headset.

Download link for 2012.09.11 build for SmartTab7 (ZTE V71A):
CM9 for SmartTab7
Download link for 2012.09.11 build for SmartTab10 (ZTE V11A):
CM9 for SmartTab10
Download link for 2012.09.11 build for Sprint Optik (ZTE V55):
CM9 for Sprint Optik

Google Apps (2012.04.29)

CM10 Jelly Bean (Android 4.1.2) actual release 2013.01.25

Credit Goes to CyanogenMod Team



What is working :
-hw acceleration
-WI-FI (Both on 2.4 GHz and on 5GHz too)
-touchscreen
-gps
-audio
-3G data
-Setting of cpu clock and governor from settings (performance settings) The max OC is as in #60 .
-tmobile theme engine
-USB
-Lagfree and Savagedzen CPU governors added
-New RIL
-Voice Calls
-Bluetooth
-Tethering over Bluetooth
- Wifi hotspot
-Tethering over USB
- Possible to turn on wifi in airplane mode.
- Deep Sleep
- Goomanager integration
-Automatic updates via goomanager works only with the newest twrp version (2.2.2.1) , so please update.

What is not working :
-Camera
-CDMA data on Optik

Bugs :


Download link for 2012.11.17 build for SmartTab7 (ZTE V71A):

CM10 for SmartTab7

Download link for 2012.11.17 build for SmartTab10 (ZTE V11A):

CM10 for SmartTab10

Download link for 2012.11.17 build for Sprint Optik (ZTE V55):

CM10 for Sprint Optik

Google Apps (2012.07.26)

Google Apps (2012.07.22) with working Picasa Sync



Previous CM10 Version :
Download link for 2012.11.03 build for SmartTab7 (ZTE V71A):
CM10 for SmartTab7

Download link for 2012.11.03 build for SmartTab10 (ZTE V11A):
CM10 for SmartTab10

Download link for 2012.11.03 build for Sprint Optik (ZTE V55):
CM10 for Sprint Optik


Download link for 2012.10.11 build for SmartTab7 (ZTE V71A):
CM10 for SmartTab7
Mirror

Download link for 2012.10.11 build for SmartTab10 (ZTE V11A):
CM10 for SmartTab10
Mirror

Download link for 2012.10.11 build for Sprint Optik (ZTE V55):
CM10 for Sprint Optik
Mirror

Download link for 2012.10.03 build for SmartTab7 (ZTE V71A):
CM10 for SmartTab7
Mirror

Download link for 2012.10.03 build for SmartTab10 (ZTE V11A):
CM10 for SmartTab10
Mirror

Download link for 2012.10.03 build for Sprint Optik (ZTE V55):
CM10 for Sprint Optik
Mirror

Download link for 2012.09.09 build for SmartTab7 (ZTE V71A):
CM10 for SmartTab7
SP1 for 09.09 build SmartTab7

Download link for 2012.09.09 build for SmartTab10 (ZTE V11A):
CM10 for SmartTab10
SP1 for 09.09 build SmartTab10

Download link for 2012.09.09 build for Sprint Optik (ZTE V55):
CM10 for Sprint Optik
SP1 for 09.09 build Sprint Optik

To start in safe mode :
Turn off the device .
Turn on the device . When the android figure come up press and hold down the volume down button.
Another possibilty is from shutdown menu. hold down the restart until the restart in safe mode is not coming up.


All of above should be installed from cwm or twrp recovery.Copy the zip files to your internal storage's root folder (mnt/sdcard). How to install cwm recovery is here :CWM recovery installation
If you have problems backing up (hangs while backup) use this cwm recovery:
7" modified cwm recovery
10" modified cwm recovery
Important to make a backup in cwm before you install this rom. (in cwm choose backup option, your backup will be stored on internal storage's clockworkmod folder). This case if you wish you can restore your original rom from cwm using restore option .
If your backup is done do a wipe data/factory reset in cwm before installation.
To install choose install zip from sdcard option in cwm recovery and browse to the zip file on your internal storage's root folder.

Vodafone HU SmartTab7 Stock rom recovery package (v03a , installable from cwm)
Vodafone HU SmartTab10 Stock rom recovery package (v03a, installable from cwm)

TWRP Recovery (Current Release v2.3.1.1):
I have ported the new graphical touch recovery(TWRP) to our device. All credits goes to Teamwin , i just port it to our device . It cannot restore backups made by cwm.

Download :
http://goo.im/devs/joestone/twrp
This new version(2.2.2.1) is needed for automatic rom updates through goomanager. The new rom versions will be automatically updateable , but only with twrp .
Also this new version is available to install as a zip from recovery (cwm or twrp) or as previous(img) through fastboot.
The filenames contains the modelcode which it belongs to.
for example :
V11_TWRP.zip is for smarttab10 and installable from recovery(cwm or twrp).
V71_recovery.img is for smarttab7 and installable from bootloader mode (fastboot) .

This is the start screen.


Here you can select wether to use internal or external storage of the tab. If selecting external don't forget to select mount SDCard


Selecting Install you can browse which file to install. Remember the internal storage accessible under data/media , while external storage is sdcard-ext.


Backup menu let you create backup of the device including some part of the firmware.If you see 0 MB Free space as on the picture select refresh sizes.
Usually it happens with the internal storage.


We can reboot the device several ways including Power Off.

Under Advanced there is a file manager which can be used to copy , move or delete files .

tiaanv said:

Joe

OK. Maybe not the best place to start for ca complete noob, but I'm diving into the ril stack.

Still allot to digest, but I'm looking at the RIL logs to see what's up...

From what I can tell you did include the vendor RIL is present in this build, right?

also the build.props has the neccesary entries for ril?

Still it's failing at quite an early stage, so perhaps the vendor RIL is not correct...

are there any sources available for the ZTE devices?

I hope that I'm not going to frustrate you, but I'd like to contribute.

T

Click to expand...

Click to collapse

All vendor lib are present in the rom and the settings are also present in build.prop nor the framework settings are present in overlay. If you check the running processes rild is running , the baseband version is shown , stk is show up the menu from sim. I have enabled showing logs for ril , libril-qc and it says sim pin status is unavailable ,invalid command received . As i remember (i am at work) icccardapplication.java is shown in logcat beside this rilj message. I think we must use the vendor ril from HC or it will not be compatible with modem firmware . So i think it not a solution to copy another device's libril-qc-qmi-1.so because it wont be compatible with our modem firmware i think. The solution is to solve this invalid command error in framework. That is also not a solution to copy libril.so and rild from hc because it does not solves the problem.
If you have time to check the sceen bug or BT would be very good too .
Of course there can be some mistakes I made , but I think ril files should be OK .
I have ideas how to solve ril problems and as you can see I have done some checks on it . The vendor ril source is not opensource therefore not available.

It seems screen glitches fixed , With the new build there is no problem with the screen after some modification . Made some modification in ril , now compiling , and will see.

Screen glitch fix

The patch for screen glitch downloadable from first post.
Install it from cwm.

eNCHANT said:

perfect, there is no graphical errors. a question, gsm is fixed and unlock? the tablet recognize my operator

Enviado desde mi SmartTab10 usando Tapatalk 2

Click to expand...

Click to collapse

No , gsm is not fixed yet . I have several java errors , while trying to integrate missing commands from caf sources.

eNCHANT said:

perfect, there is no graphical errors. a question, gsm is fixed and unlock? the tablet recognize my operator

Enviado desde mi SmartTab10 usando Tapatalk 2

Click to expand...

Click to collapse

I see your sim is registered to movistar.
Is your pin turned off ?
does data connection work using gsm ?
apn list is empty or not ?

Sorry , but I have restored my tab to hc for daily work .