Niki SuperCID and Security Unlocker

Search This thread

jockyw2001

Inactive Recognized Developer
May 17, 2007
1,709
77
I finally found some time to post this, it's been on my desk since February.
Anyhow, today is the day. Oh yes, running this will SIM unlock your device as well :D

Niki SuperCID and Security Unlocker v0.1
========================================

Brought to you by jockyw2001
(c)2008 jockyw2001

Consider a donation to keep the R&D going :D
Send your PayPal donation to jocky_wilson@hotmail.com

Rapidshare:
Download-Link #1: http://rapidshare.com/files/95890081/Niki-SuperCID-Security-Unlocker.zip.html

Megaupload:
http://www.megaupload.com/?d=EB83Y4CJ


Note for Vista users
====================
This guide will explain how to change your drivers to the xp:
http://www.modaco.com/content/Windo...UU-on-Vista-It-can-be-done-the-ultimate-guide
You will have problems running the unlocker otherwise. Log in as administrator if you run the ROM update tool and unlocker. That also applies to XP users.

Instructions
============
1. Make sure you installed HardSPL 1.15 MFG If you did not install 1.15 yet follow instructions here: http://xdaforums.com/showthread.php?t=355730
To verify if HardSPL is correctly installed: power off and then press power on while keeping camera pressed, this will enter the so called bootloader mode and you see a tri-color screen (Red, Green, Blue). You should see "SPL-1.15.Hard" on the second line in the top left corner. You can exit this mode by means of a "soft reset": press the reset button with the stylus.

2. Make a note of the radio version that is currently installed. You see the version strings in the splash screen which appears soon after power on (e.g. "R 1.58.16.27"). Since we will flash a special radio in step 5 you need to flash back your original radio in the last step. You can download radio roms from XDA devs here:
http://xdaforums.com/showthread.php?t=369502
EDIT: if your current radio version is 1.65.28.25 or higher you should first downgrade to a lower ROM version like RUU_Nike_Radio_1.58.21.23_25.65.30.04S_Modded.

3. Connect PC and Niki with a USB cable and keep it connected until the last step.

4. Power on the Niki and let it boot into Windows Mobile. On the PC make sure the activesync icon is green.

5. After you unpacked the download you see directories "step1" and "step2". Go into "step1" and run NikiCustomRUU.exe. This will flash the special patched radio rom. Follow the instructions until it is finished. IMPORTANT: Make sure that the flash correctly finished. The device will restart automatically once the flashing is completed.

6a. Power off and power on in tri-color bootloader mode.
6b. Unplug and replug usb cable and wait 10 seconds

7a. right-click activeync icon and uncheck "Allow USB connections" from Connection Settings
7b. On your PC go into the "step2" directory and run "Niki-supercid.exe".

You should see this:
--------------------
=== Niki SuperCID and Security Unlocker (c)2008 by jockyw2001
=== Donations happily accepted, paypal to jocky_wilson@hotmail.com

[] Done, your device should now be superCID and Security Unlocked
[] Your device is unlocked and you can change anything anytime ;)
[] Don't forget to flash your original radio

Press Enter to exit
-------------------

If you see this:
----------------
=== Niki SuperCID and Security Unlocker (c)2008 by jockyw2001
=== Donations happily accepted, paypal to jocky_wilson@hotmail.com

Your CID = HTC__001

[] Failed! Please soft reset and try again
[] To soft reset press and hold camera button and then press reset with stylus

Press Enter to exit
-------------------
then do a soft reset (press and hold the camera button first and then shortly press the reset button with the stylus) and try again.

8. Download the original radio from here:
http://xdaforums.com/showthread.php?t=349375
to the "step3" directory on your PC and flash it with NikiCustomRUU.exe

9. right-click activeync icon and check "Allow USB connections" from Connection Settings

That's all folks :D

Enjoy and ... donate to keep R&D going! Thx!
Send your PayPal donation to jocky_wilson@hotmail.com

JockyW

Edit: Niki Security Relocker

Some users with a security unlocked device would like to relock it again e.g. for warranty purposes. Unzip niki-relock.exe from the attached niki-relock.zip into the "step2" directory of the security unlocker (in the same directory there should be niki-supercid.exe). Carry out the same steps as for the security unlocker but in step 7b run niki-relock.exe


Have fun!


Credits
=======

* des, pof and olipro for SSPL and HardSPL
* arc and all the other great minds at XDA devs
* viperbjk, adfree and all other QC hackers at Modopo


(c)2008 jockyw2001
jocky_wilson@hotmail.com
Feb 29th 2008
 

Attachments

  • niki-relock.zip
    8.3 KB · Views: 4,442
Last edited:
  • Like
Reactions: SferaDev

sackbauer

Senior Member
May 22, 2006
270
1
52
Vienna
it took a long time but it was worth waiting !

jocky - thanks for your time spent on this, thanks for sharing this tool with the niki community and please stay with us and help us from time to time ;-)

again thanks king jocky
 

@muja@

Senior Member
Apr 10, 2008
340
26
Well done(but little bit late for me as i already unlocked my Nike)and thanks for your hard work mate.Any news on Wings yet?
Cheers
 

iloveannie

Member
Apr 16, 2008
28
0
Okk..i flash the patched radio and boot phone back on holding dowen camera to boot into tri-color screen 1.15.hard

I then load Niki-supercid.exe from step 2 from which brings up CMD with below then just a flashing cursor

=== Niki SuperCID and Security Unlocker (c)2008 by jockyw2001
=== Donations happily accepted, paypal to jocky_wilson@hotmail.com
_

How long should this process take and if it should be immeditate where am i going wrong?
 
Last edited:

iloveannie

Member
Apr 16, 2008
28
0
Regarding previous post my phone is also locked onto correct network now aswell so phone is pretty unusable with a sim card in :mad:

HELPPP PLease
 

@muja@

Senior Member
Apr 10, 2008
340
26
2. Make a note of the radio version that is currently installed. You see the version strings in the splash screen which appears soon after power on (e.g. "R 1.58.16.27"). Since we will flash a special radio in step 5 you need to flash back your original radio in the last step. You can download radio roms from XDA devs here:
http://xdaforums.com/showthread.php?t=369502
Have you done that mate?
 

iloveannie

Member
Apr 16, 2008
28
0
Yes just flashed back to correct radio and i can now use sim card again. but still phone did not successfully unlock
 

@muja@

Senior Member
Apr 10, 2008
340
26
Then try again mate:
5. After you unpacked the download you see directories "step1" and "step2". Go into "step1" and run NikiCustomRUU.exe. This will flash the special patched radio rom. Follow the instructions until it is finished. IMPORTANT: Make sure that the flash correctly finished. The device will restart automatically once the flashing is completed.

6. Power off and power on in tri-color bootloader mode.

7a. right-click activeync icon and uncheck "Allow USB connections" from Connection Settings
7b. On your PC go into the "step2" directory and run "Niki-supercid.exe". If all went well you will see the unlockcode on your monitor and your Niki is being restarted automatically.
7c. right-click activeync icon and check "Allow USB connections" from Connection Settings
 

iloveannie

Member
Apr 16, 2008
28
0
Tried about 5 times lol

Get as far as this:


5. After you unpacked the download you see directories "step1" and "step2". Go into "step1" and run NikiCustomRUU.exe. This will flash the special patched radio rom. Follow the instructions until it is finished. IMPORTANT: Make sure that the flash correctly finished. The device will restart automatically once the flashing is completed.

6. Power off and power on in tri-color bootloader mode.

7a. right-click activeync icon and uncheck "Allow USB connections" from Connection Settings
7b. On your PC go into the "step2" directory and run "Niki-supercid.exe". If all went well you will see the unlockcode on your monitor and your Niki is being restarted automatically.

-- This opens a cmd box but just hangs and screen stays on tri-color boot screen.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    I finally found some time to post this, it's been on my desk since February.
    Anyhow, today is the day. Oh yes, running this will SIM unlock your device as well :D

    Niki SuperCID and Security Unlocker v0.1
    ========================================

    Brought to you by jockyw2001
    (c)2008 jockyw2001

    Consider a donation to keep the R&D going :D
    Send your PayPal donation to jocky_wilson@hotmail.com

    Rapidshare:
    Download-Link #1: http://rapidshare.com/files/95890081/Niki-SuperCID-Security-Unlocker.zip.html

    Megaupload:
    http://www.megaupload.com/?d=EB83Y4CJ


    Note for Vista users
    ====================
    This guide will explain how to change your drivers to the xp:
    http://www.modaco.com/content/Windo...UU-on-Vista-It-can-be-done-the-ultimate-guide
    You will have problems running the unlocker otherwise. Log in as administrator if you run the ROM update tool and unlocker. That also applies to XP users.

    Instructions
    ============
    1. Make sure you installed HardSPL 1.15 MFG If you did not install 1.15 yet follow instructions here: http://xdaforums.com/showthread.php?t=355730
    To verify if HardSPL is correctly installed: power off and then press power on while keeping camera pressed, this will enter the so called bootloader mode and you see a tri-color screen (Red, Green, Blue). You should see "SPL-1.15.Hard" on the second line in the top left corner. You can exit this mode by means of a "soft reset": press the reset button with the stylus.

    2. Make a note of the radio version that is currently installed. You see the version strings in the splash screen which appears soon after power on (e.g. "R 1.58.16.27"). Since we will flash a special radio in step 5 you need to flash back your original radio in the last step. You can download radio roms from XDA devs here:
    http://xdaforums.com/showthread.php?t=369502
    EDIT: if your current radio version is 1.65.28.25 or higher you should first downgrade to a lower ROM version like RUU_Nike_Radio_1.58.21.23_25.65.30.04S_Modded.

    3. Connect PC and Niki with a USB cable and keep it connected until the last step.

    4. Power on the Niki and let it boot into Windows Mobile. On the PC make sure the activesync icon is green.

    5. After you unpacked the download you see directories "step1" and "step2". Go into "step1" and run NikiCustomRUU.exe. This will flash the special patched radio rom. Follow the instructions until it is finished. IMPORTANT: Make sure that the flash correctly finished. The device will restart automatically once the flashing is completed.

    6a. Power off and power on in tri-color bootloader mode.
    6b. Unplug and replug usb cable and wait 10 seconds

    7a. right-click activeync icon and uncheck "Allow USB connections" from Connection Settings
    7b. On your PC go into the "step2" directory and run "Niki-supercid.exe".

    You should see this:
    --------------------
    === Niki SuperCID and Security Unlocker (c)2008 by jockyw2001
    === Donations happily accepted, paypal to jocky_wilson@hotmail.com

    [] Done, your device should now be superCID and Security Unlocked
    [] Your device is unlocked and you can change anything anytime ;)
    [] Don't forget to flash your original radio

    Press Enter to exit
    -------------------

    If you see this:
    ----------------
    === Niki SuperCID and Security Unlocker (c)2008 by jockyw2001
    === Donations happily accepted, paypal to jocky_wilson@hotmail.com

    Your CID = HTC__001

    [] Failed! Please soft reset and try again
    [] To soft reset press and hold camera button and then press reset with stylus

    Press Enter to exit
    -------------------
    then do a soft reset (press and hold the camera button first and then shortly press the reset button with the stylus) and try again.

    8. Download the original radio from here:
    http://xdaforums.com/showthread.php?t=349375
    to the "step3" directory on your PC and flash it with NikiCustomRUU.exe

    9. right-click activeync icon and check "Allow USB connections" from Connection Settings

    That's all folks :D

    Enjoy and ... donate to keep R&D going! Thx!
    Send your PayPal donation to jocky_wilson@hotmail.com

    JockyW

    Edit: Niki Security Relocker

    Some users with a security unlocked device would like to relock it again e.g. for warranty purposes. Unzip niki-relock.exe from the attached niki-relock.zip into the "step2" directory of the security unlocker (in the same directory there should be niki-supercid.exe). Carry out the same steps as for the security unlocker but in step 7b run niki-relock.exe


    Have fun!


    Credits
    =======

    * des, pof and olipro for SSPL and HardSPL
    * arc and all the other great minds at XDA devs
    * viperbjk, adfree and all other QC hackers at Modopo


    (c)2008 jockyw2001
    jocky_wilson@hotmail.com
    Feb 29th 2008