New Build - 22 Nov 2013
New build cm-11-20131122-terenceng-p1.zip: get it from Downloads post. Refer to ChangeLog.
New build cm-11-20131122-terenceng-p1.zip: get it from Downloads post. Refer to ChangeLog.
Thanks Terence & devs devs et all,
a small request, if possible, if willing, please remove all wallpapers, I just feel it's a waste of space, download speed, install speed, etc etc etc. it's individual apsk could be installed by whoever wants a particular one, is my assumption correct? Thanks.
Hmm, what do you guys think? Majority wins.
Why not to remove 'em manually as far as you're alone? BTW, all official CM builds contain wallpapers. It looks like developers opinion differs...
Upload the wallpapers in a sperate zip for people who do want those wallpapers.
I do not even feel the need for movie studio. There hasn't been changes, I can just extract it from previous builds and use.
Sent from my Micromax A116 using Tapatalk
rerun test again.
reboot recovery - WIPE - advance - android secure, cache, data, dalvik, system too.
flash this version as indicated in quote
reboot - all OK in 3 mins
NO PHONE.
didn't ask to setup account, I think the above WIPE wasn't done at all, I think I accidentally skipped it by mistake.
Anyway, SU, titanium all works, esfileexplorer replace efs folder, still no phone.
enable ART - rebooting 10 mins still on CM logo half way cut off on right side. May be this is the part Terence says need 20 mins. Hence still waiting.
EDIT
after waited till 30 mins, give up, hold power button 8 seconds for full shutdown.
restock
reflash 4.4 directly
enable ART immediately, without bothering with SU, usb debug, etc
reboots - waiting 5 mins out, hope reaches 20 mins OK.
currently on CM logo half way cut off on right side again.
It doesn't boot loop, i.e. it doesn't shutdown and quickly turns on, showing samsung tab, then CM robot then CM logo. It just remains on CM logo half way cut off on right side all the time.
Occasional shutter, thinking it's doing something, but then never moves forward.
Not sure if such helps the devs or not.
Report END>.
reboot recovery - WIPE - advance - android secure, cache, data, dalvik, system too.
flash this version as indicated in quote
reboot - all OK in 3 mins
NO PHONE.
didn't ask to setup account, I think the above WIPE wasn't done at all, I think I accidentally skipped it by mistake.
Anyway, SU, titanium all works, esfileexplorer replace efs folder, still no phone.
enable ART - rebooting 10 mins still on CM logo half way cut off on right side. May be this is the part Terence says need 20 mins. Hence still waiting.
EDIT
after waited till 30 mins, give up, hold power button 8 seconds for full shutdown.
restock
reflash 4.4 directly
enable ART immediately, without bothering with SU, usb debug, etc
reboots - waiting 5 mins out, hope reaches 20 mins OK.
currently on CM logo half way cut off on right side again.
It doesn't boot loop, i.e. it doesn't shutdown and quickly turns on, showing samsung tab, then CM robot then CM logo. It just remains on CM logo half way cut off on right side all the time.
Occasional shutter, thinking it's doing something, but then never moves forward.
Not sure if such helps the devs or not.
Report END>.
Last edited:
@cx5: Can't help you with your Phone problem as my sim card slot has been out of order for months; perhaps others might want to feedback whether the phone function is working...
Sent from my GT-P1000 running KitKat
Sent from my GT-P1000 running KitKat
Last edited:
P1000L don't boot
Yeap!! I have the same problem here with my P1000L.....maybe it's working only in the P1000 for now...
I tried to install twice...with full restock but it didnt boot... and i can enter in recovery (TWRP) as well..
Yeap!! I have the same problem here with my P1000L.....maybe it's working only in the P1000 for now...
I tried to install twice...with full restock but it didnt boot... and i can enter in recovery (TWRP) as well..
It was and is in CM default packages. why create extra work for the developers?
keep it like it is!
This is not even an enhancement request, just for personal comfort.
Its xda here, not "what wish do you have my little princess?"
ok, first problem is I have nothing on the screen at all, I can get it to download mode and Heimdall detects it but the screen is black, occasionally the lights on the bottom light up like it's running but again, screen stays black. any suggestions?
Kitkat seems much smoother than 4.3. Its a great alpha build!
No phone/ril
broken orientation animation
rest looks good
No phone/ril
broken orientation animation
rest looks good
I don't think it is smoother than 4.3 for me,
In fact in makes my browser (lightning) and webapps extremely slow since the new chromium webview seems to be too demanding for our tab.
Thinking about going back to 4.3 for now.
Anyway, thanks to all the great people who are keeping our tab alive.
Sent from my GT-P1000 using xda app-developers app
Would be awesome if somebody would develop for p1010 version. Anyhow good job for the developer for giving p1000 Android 4.4!
kernel + recovery
EDIT: if you mean heimdal, then select kernel.
---------- Post added at 03:13 PM ---------- Previous post was at 03:11 PM ----------
I use an other build, but 4.4 seems to work with gapps from dev BaNks: http://xdaforums.com/showthread.php?t=2012857. I get no error
Last edited:
p1n p1l no go
I was just going to post about it and read your updates...
I guess it's confirmed... no go for p1n and p1l. :crying:
I tried everything I could think of, even the whole procedure with the old CM10.2 kernel.. but I get stuck with the CM boot screen, no logcat cause I supposed it's disabled by default... but I suspect it has booted, cause it lights up when I touch the screen. No recovery either.
The only way to go back is to go into download mode and flash the cm10.2 p1n kernel. I use heimdall.
Cheers.
I was just going to post about it and read your updates...
I guess it's confirmed... no go for p1n and p1l. :crying:
I tried everything I could think of, even the whole procedure with the old CM10.2 kernel.. but I get stuck with the CM boot screen, no logcat cause I supposed it's disabled by default... but I suspect it has booted, cause it lights up when I touch the screen. No recovery either.
The only way to go back is to go into download mode and flash the cm10.2 p1n kernel. I use heimdall.
Cheers.
Just installed this, so far so good for such an early build. Didn't have much problems with the initial configuration (some orientation glitches in the first seconds, google account setup crashed at the end, but the account was added). Didn't see much more (i think i also don't have RIL, because there's no network symbol, but haven't checked on that, only use this tab on wifi now).
Waiting for it to reboot after changing to ART (5 minutes and counting. Let's see how long does it take).
Thanks to terenceng for this rom
EDIT: still rebooting... Any thoughts why?
Waiting for it to reboot after changing to ART (5 minutes and counting. Let's see how long does it take).
Thanks to terenceng for this rom
EDIT: still rebooting... Any thoughts why?
Last edited:
Just installed this, so far so good for such an early build. Didn't have much problems with the initial configuration (some orientation glitches in the first seconds, google account setup crashed at the end, but the account was added). Didn't see much more (i think i also don't have RIL, because there's no network symbol, but haven't checked on that, only use this tab on wifi now).
Waiting for it to reboot after changing to ART (5 minutes and counting. Let's see how long does it take).
Thanks to terenceng for this rom
EDIT: still rebooting... Any thoughts why?
Most likely it will never finish. I had the same problem, look a few posts back how to solve it by going back to dalvik without factory reset.
Similar threads
- Locked
Top Liked Posts
-
There are no posts matching your filters.
-
101[ROM] CM-11.0 | AOSP | Android 4.4.2 KitKat KOT49H | Kernel 3.x HumberOS | SGT7 | TWRP | P1000/L/N SGH-T849 GSM | SCH-I800/SPH-P100 CDMA VZW/SPRINT
[RETIRED] (Download links in Post #4)
| CyanogenMod 11.0 - Android 4.4.2 - KitKat |
FOR YOUR
In case you don't know:
Code:/* * I am not responsible for bricked devices, ruined SD cards, * damaged network, mobile or data components, or any other loss or stress * suffered by you, your loved ones or your device resulting * from flashing and/or using any of the ROMs provided in this thread. */
Enjoy!
First 10 posts of this thread:
#1: This post
#2: Screenshots
#3: ChangeLog
#4: Downloads
#5: Credits
#6: Testing and Reporting Bugs
#7: reserved
#8: reserved
#9: reserved
#10:reserved3734
5 Dec 2013
- More SGT7 UI features - try them yourself - go to Settings | Interface and explore the various options
- TV Out (need testers) (Settings | Device/More | Advanced | TV)
- Screenshots now working (Enable screenshots: Settings | Buttons | Power Menu | Screenshot.
Take screenshot: Hold Power button and choose Screenshot) - Initial setup, rotation and switching between landscape and portrait modes are now smooth.
- More SGT7 UI features - try them yourself - go to Settings | Interface and explore the various options
New posts
-
[ROM][OFFICIAL][enchilada][14] LineageOS 21
- Latest: wuyf98@gmail.com
