yup and it s enabled, but when i type in recovery free i get only 90mb no swap.
# General parameters
general{
apps2sd=1 # this is useless here, require a modified a2sd script
dalvik2sd=0 # relinks the dalvik to sd if /system/sd/dalvik-cache exists
data2sd=0 # moves the data to sd if user enables
}
#compcache related parameters
compcache{
compcache_en=0 # enable(1) or disable(0) compcache
cc_disksize=32 # Ram swap disksize - any number between 1 to 95 should work
cc_memlimit=48 # Limit the memory usage for backing swap (cc .5x known issue-defaults to 15% of total RAM)
cc_backingswap_en=0 # enable(1) or disable(0) backing swap
cc_backingswap=/dev/block/mmcblk0p3 # pointing to the backingswap partition device
cc_swappiness=60 # default 60
}
#Linux swap parameters
#
# linux swap can only be enabled if cc_backingswap_en is set to "0"
#
linux_swap{
linux_swap_en=1 # enable(1) or disable(0) linux swap
linux_swap_partition=/dev/block/mmcblk0p3 # swap partition device
swappiness=60 # default 60
}
#virtual memory
sys_vm{
sys_vm_en=1 # enable(1) or disable(0) virtual memory configurations
page_cluster=0 #default 3, (0 since CM3.9.6+)
laptop_mode=0 # default 0
dirty_expire_centisecs=4500# default 3000
dirty_writeback_centisecs=1500 # default 500
dirty_background_ratio=5 # default 5
dirty_ratio=10 # default 10
}
#cpu clock
proc_cpu{
proc_cpu_en=1 # enable(1) or disable(0) user cpu configurations
# freqency options
# 19200
# 122880
# 128000
# 245760
# 384000
# 528000
# 576000
scaling_min_freq=384000 # default 245760
scaling_max_freq=576000 # default 528000
sampling_rate=2000000 # default 2000000 depending on kernel version
powersave_bias=0 # default 0, (200 since CM3.9.6+ )
up_threshold=35 # default 40, percent cpu usage before going up a speed step
}