Sounds like a "Pull the USB cord and try again" to me. It's a return from the command prompt, what you need to do is HOLD both volume buttoms through the whole process.
[RECOVERY][APP] 4-28 One-Click NvFlasher ClockWorkMod Touch 5.8.1.3/5.0.2.0/4.0.1.5
- Thread starter TGA_Gunnman
- Start date
-
- Tags
- development
Sounds like a "Pull the USB cord and try again" to me. It's a return from the command prompt, what you need to do is HOLD both volume buttoms through the whole process.
no mac version comming, I don't like or support apple.
Sent from my LG-P999 using XDA Premium App
I suggested that in one of his 15 posts in dev area last night ,had to get mod involved.
Sent from my LG-P999 using XDA Premium App
WORKED LIKE A CHARM!!!!!! You certainly rocked out with your c#$k out on this. GRACIAS AMIGO!!!! 
Edit: Never mind. I am a noob goofball. I watched the video and all is good.
The one click root and flash stuff has really been great for a new guy like me coming from windows mobile.
Thank you.
The one click root and flash stuff has really been great for a new guy like me coming from windows mobile.
Thank you.
Last edited:
need help
cwm not working for me...i used the nvflash method....when i try to make a back up i get error while writing yaffs2 /data....and when i try to install a zip from card none of my downloaded files show up...tried in a folder and also on root ofexternal card and internal memory...any advice would be appreciated...
cwm not working for me...i used the nvflash method....when i try to make a back up i get error while writing yaffs2 /data....and when i try to install a zip from card none of my downloaded files show up...tried in a folder and also on root ofexternal card and internal memory...any advice would be appreciated...
You need an external SD card. based on everything you are saying you dont really have one. Everything from CWM uses external only. Please read the directions.
Using 3.0.2.7, First thing I did was backed up my stock rom. Works fantastic. Is this recovery app going to get a update?? Is 3.0.2.7 the final recovery build? Just checking, I have seen a few people having issues with it but I have found it just great. Thanks again Gunman, you did a great job. The only problem I had with the app was I got a install wizard pop up as soon as I plugged in my usb cable. Had to do a little figuring but all went great. Used Windows XP.
Thanks again Gunman.
Thanks again Gunman.
I have a 16gb external sdcard... its really weird when i hit install zip from sd card.... it shows me everything on the root of my sd card except the rom zips I put on there..... what did u think about the back up issue... keep getting error about yaffs2.... thanks for response
Sent from my LG-P999 using XDA App
Sent from my LG-P999 using XDA App
Well after multiple tries on my windows 7 laptop I couldn't get CWR to install on my phone so I tried on an old desktop running windows XP and it worked perfect!!! I was even able to restore my other G2x which was stuck in a bootloop.. I can't thank gunnman enough for this valuable tool..Thank you again....
I had a similar issue on my Win7 x64 desktop, which has 10-12 USB devices plugged in. I suspect the phone wasn't getting enough current from the USB port to hold up its end of the process (even though I was using a USB port on the motherboard). Worked fine when I used my laptop (which does not have 10 other USB devices connected).
Sent from my LG-P999
that's odd. i'm pretty good at this stuff,but don't know about that one. are you sure they're named .zip? you're not extracting them? i guess i'd try another sdcard and see what happens as my first move.
Thanks TGA_Gunnman and all the developers for the awesome tools and guide. Easiest recovery and flash I've ever done!
im getting
failing executing command 14 NvError 0x120000
command failure: partition download failed
any ideas?
failing executing command 14 NvError 0x120000
command failure: partition download failed
any ideas?
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
268
Procedure:
If you came here first, go here and read the getting started before flashing this recovery: GETTING STARTED GUIDEhttp://xdaforums.com/showthread.php?t=1060715
This process consists of 2 steps.
1. Install the windows driver.
2. Flash the Recovery using the OneClick App.
*** You will need to have .Net Framework 2.0 or above installed. ***
_________________________________________________________________________________________________
VIDEO:
- You can watch a Video provided for us by the UnLockr for a walk-through of how to use the One-Click ClockworkMod Recovery Flasher. (Thanks Dave!)
Click on The UnLockr Image to watch the video:(Video is no longer relevant pertaining to entering recovery from boot. And the buttons you can click.)
_____________________________________________________________________________________________________________________________________________
One-Click ClockworkMod Recovery NvFlasher
****Warning I am not responsible if you brick your phone!****
Instructions:
Nvidia NvFlash APX Driver
- Unlike a lot of Android phones out there the Nvidia Tegra2 chipset require additional drivers in Windows to support low level flashing.
Install APX Windows driver from APX folder.
(Windows x86 and x64 O/S Drivers):
****If you are running VmWare kill it.****
- Remove the battery.
- Plug in your USB cable to your PC.
- Hold Volume Up and Volume Down at the same time keeping them held down.
- Plug in the USB cable to your phone. (Keep the buttons held until Windows detects a new APX device.)
- Open Device Manager in Windows and you should see "APX Device" listed with an error icon.
- Right click on the APX device.
- Select 'Update driver software'.
- Select 'Browse my computer...'.
- Select 'Let me pick...'.
- Select 'Have disk'.
- Browse to directory you extracted the *driver* software to: One-Click-G2x-recovery-flasher-04-28-12\APX.
- Accept any warnings, including the big red alert (you may need to disable UAC).
- Now in Device Manager under 'USB Controllers' you should have an 'NVIDIA USB Boot-recovery driver for mobile devices'.
- If not, uninstall the driver, reboot, rinse and repeat.
Flash ClockworkMod Recovery
- Remove the battery.
- Goto NvFlash directory and Double Click "OneClickRecoveryFlasher.exe".
- Make sure the USB cable is unplugged from your phone.
- Hold Volume Up and Volume Down at the same time keeping them held down. (Keep them held until you see the "S/W Upgrade" screen on your phone after you complete step7!).
- Plug in the USB cable to your phone.
- Click the "Flash CWM" button of your choosing. If you own a External SD card I suggest to choose version 5.0.2.0. This gives you Internal and External SD Support for ROM flashing but has External SD Nandroid Backup Support Only! If you do not own a External SD Card choose version 4.0.1.5 what has full Internal SD support for flashing ROMS and Nandroid backup.
- You should see it send a bunch of files to the device and the phone screen should say "S/W Upgrade - Please wait while upgrading...". Once the files are sent and the program is finished running in the command window, you can just pull the USB cord while it still says "S/W Upgrade - Please wait while upgrading...".
- Put the battery back in and you can now boot into Recovery. (see below..)
Booting into ClockworkMod Recovery
- Power off your phone.
- Hold Vol Down + Power.
- Keep holding them, as soon as you see a "Blue LG Graphic" logo let go of the buttons.
Restore LG G2x Stock Recovery
- Flash Stock recovery only when you want to send your phone in to T-Mobile. Otherwise do not flash Stock recovery. Stay on ClockworkMod Recovery.
- Remove the battery.
- Goto NvFlash directory and Double Click "OneClickRecoveryFlasher.exe".
- Make sure the USB cable is unplugged from your phone.
- Hold Volume Up and Volume Down at the same time keeping them held down. (Keep them held until you see the "S/W Upgrade" screen on your phone after you complete step7!).
- Plug in the USB cable to your phone.
- Click the "Flash Stock" button.
- You should see it send a bunch of files to the device and the phone screen should say "S/W Upgrade - Please wait while upgrading...". Once the files are sent and the program is finished running in the command window, you can just pull the USB cord while it still says "S/W Upgrade - Please wait while upgrading...".
- Put the battery back and you are done.
654ClockworkMod Version 4.0.0.2 is now apart of One-Click-App. I had to do a quick piecemeal on my laptop since i am out of town looking for a house, buying a house and moving. Don't worry about the file versions in the dir. It is 4.0.0.2, I tested it.
Feel free to flash right on top of existing versions.
Sry for the delay.
Have fun! - You can watch a Video provided for us by the UnLockr for a walk-through of how to use the One-Click ClockworkMod Recovery Flasher. (Thanks Dave!)
New posts
-
-
-
Features disabled on fastboot and bootloader. How do I enable them?- Latest: mayberandomparable
-
Question How to open legacy Samsung Notes (.ssn) files?
- Latest: AleksandarT10
-
