[32A][HOW-TO] Upgrade to 6.35 Radio and 1.76.2007 SPL (Downgrade/Revert too!)

Search This thread

Deviser

Senior Member
Dec 19, 2009
110
2
Porto
Does this radio and SPL work for other 32A ROMs ? Or do i have to downgrade before loading cyanogenMod, for example...

Thanks.
 

samreay

Member
Dec 28, 2009
5
0
Hey Guys

Hope im not fouble posting, but I dont want to continue without knowing because I dont want to brick my phone.

So when you are running the nandroid backup at the start, do you use the recovery version for the hero you posted the link to, or one that was made for the magic?
 

lagos911

Senior Member
Jan 25, 2009
301
40
Why my device stuck at < waiting for device >
How much time I have to stay there?
I have to push something?
 

cursordroid

Senior Member
Jul 20, 2009
1,181
15
Edmonton
Why my device stuck at < waiting for device >
How much time I have to stay there?
I have to push something?

You obviously didn't read the directions...
You need to start your phone in FASTBOOT mode, by holding Back and pressing Power.
If this still doesn't work then you don't have the FASTBOOT drivers installed properly and should get that sorted out first. Check in your Device Manager to see if there are any Unknown Devices when your phone is plugged in.
 

cursordroid

Senior Member
Jul 20, 2009
1,181
15
Edmonton
Hey Guys

Hope im not fouble posting, but I dont want to continue without knowing because I dont want to brick my phone.

So when you are running the nandroid backup at the start, do you use the recovery version for the hero you posted the link to, or one that was made for the magic?

The first nandroid back is done using the default Sapphire-H recovery, then after the radio and SPL is flashed you need the Hero recovery.
 

gren8

Member
Dec 29, 2009
11
0
So - NO - I'm really not an idiot...but for some reason, I decided to walk through all the steps in this thread again (except for the radio update because it was done already) - and now it all WORKED! The one extra step I took was wiping my SD card (which was a basic card with NO extra partitions and I have used it to flash dozens of other ROM's without an issue) and started from scratch with that too, just in case. Well, it worked!! I just installed the CursorSense 0.8 ROM successfully and it is booting now (nice Nexus boot screen BTW).

So - thanks for letting me vent and ask for help on this thread...it made me double and triple check a few things, and bam! I got through it.

As always - this forum and you guys are ridiculously amazing!

Happy holidays :)

How did you wipe your SD card? When I try to do this in system recovery I get an error "Run 'wipe ext' via adb!". How can I do this?

thx
 

lagos911

Senior Member
Jan 25, 2009
301
40
You obviously didn't read the directions...
You need to start your phone in FASTBOOT mode, by holding Back and pressing Power.
If this still doesn't work then you don't have the FASTBOOT drivers installed properly and should get that sorted out first. Check in your Device Manager to see if there are any Unknown Devices when your phone is plugged in.

Can you please tell me where I can find the drivers?
The HTC forum is down and I can login and download it.
Thanks.
 

Phil_McRevis

Senior Member
Aug 26, 2009
93
0
This may sound stupid but does this let me run hero roms? Because i have a hero recovery so i assume that the radio and spl are compatable with hero roms? i'm probably totally off but thought it was worth a shot.
 
Last edited:

cursordroid

Senior Member
Jul 20, 2009
1,181
15
Edmonton
This may sound stupid but does this let me run hero roms? Because i have a hero recovery so i assume that the radio and spl are compatable with hero roms? i'm probably totally off but thought it was worth a shot.

This Radio/SPL update makes the 32A magic almost identical to the Hero. There are some pretty major hardware differences though.

You can flash a Hero ROM onto your phone now, with these exceptions:
- wifi not working
- camera not working
- LED not working
- bluetooth not working

The wifi, camera and LED issues can be fixed through a kernel update. The CCR32A-0.2a (CursorSense) kernel addresses these issues. The bluetooth is an issue though. I'm working on it, but it'll take some time.

My goal in development is to be able to create a ROM that is universal to the Hero and the 32A Magic (6.35 radio). I'm close to this goal. I'll keep you all posted.

Until then, the only ROM that works with this radio/SPL combination is the CursorSense32A ROM. Make sure you try it out and give me some feedback!

Cheers! and Happy New Year!
 

pongaman

New member
Mar 27, 2009
4
0
i have T-Mobile My Touch3G and upgrade1.76.2007 SPL for upgrade Thai UI Sense after upgrade cannot boot to normal screen But can fastboot and hboot. How can i fix it
 

cursordroid

Senior Member
Jul 20, 2009
1,181
15
Edmonton

This is for 32A Magic only!!!

Download Eng SPL 1.33.2005. Extract hboot.img from the zip file. Then flash the hboot using fastboot.
Code:
fastboot flash hboot hboot.img

You can download the Eng SPL you need by searching Google for "Amon_RA hboot spl".

Next time be more careful. You could have seriously and permanently damaged your phone!
 

pongaman

New member
Mar 27, 2009
4
0
show this message in command line
sending 'hboot' <512kb> ......FAILES (Remote: Not Allow)
 

stian230

Senior Member
Oct 29, 2009
1,425
1,837
Nesttun
I get up fast boot and hboot. I can not access recovery.i have perfect spl.
the way I have understood that I must use the terminal on the phone to make a Gold Card?
Help:(
 

draculacheng

Member
Aug 28, 2008
24
0
HONGKONG
sapphire pvt 32a ship s-on h
hboot-1.76.0007(sapp10000)
cpld-12
radio-6.35.07.29
(hk htc)
i flash the offical sence ui b4,can i use it to downgrade to eng spl?
 

daandman

Senior Member
Aug 3, 2009
461
24
Help!

I downloaded & followed all the steps, and it seemed to work fine, but now when I try to reboot it it just goes on a continuous loop rebooting at the Rogers logo. I can load it straight into recovery, but I can't click anything once in there.

What do I do??
 

Top Liked Posts

  • There are no posts matching your filters.
  • 6
    Hi all,

    I thought I would start a separate thread for everyone to get the proper instructions on how to upgrade to the new 6.35 radio and 1.76.2007 SPL.

    Too many people are confused on the directions for upgrading. I want people to be happy with modding their phones, not angry with me. :)

    If followed exactly, these directions will help with the issue a lot of users are having.

    THIS IS FOR 32A MAGIC/SAPPHIRE ONLY!!!

    IMPORTANT NOTES (THANKS XAUEIOUS!)
    xaueious said:
    For everyone who is flashing to 1.76.2007 and getting S-ON in their HBOOT,

    http://xdaforums.com/showthread.php?t=643291

    They should know that they need to use the command "fastboot enableqxdm 0" to get S-OFF back with that SPL. This information should go in your SPL + radio update post.


    Also, ezterry and lbcoder confirmed the reason of SPL+radio flash bricks, and is suggesting a way to flash the SPL+radio to avoid bricks. :
    http://xdaforums.com/showthread.php?t=655097

    In short, wipe the system and boot partitions in addition to recovery, and end with the command "fastboot reboot-bootloader"

    Upgrade to 6.35.10.18 Radio and 1.76.2007 SPL

    Prerequisites:
    - HTC Magic / Sapphire 32A
    - Engineering SPL
    ----- 1.33.2005
    ----- 1.33.2009
    ----- 1.33.2010
    ----- If you boot into fastboot and have issues with "fastboot:remote not allow", then your SPL won't work. Upgrade to Engineering SPL before continuing.
    ----- If you do not have an Engineering SPL, download 1.33.2010 and flash through recovery before starting this procedure. Flash the SPL update.zip like any other update.zip file.
    - Working ADB/Fastboot Drivers
    - Basic knowledge or modding your phone

    You will need:
    - The 1.76.2007 SPL HBOOT image
    http://www.theandroidkitchen.com/fileshare/Sapphire-32A-Updates/?download=hboot-1.76.2007.img
    - The 6.35.10.18 Radio Image
    http://www.theandroidkitchen.com/fi...es/?download=Radio_HTC_PVT_32A_6.35.10.18.img
    - The Amon_RA Hero Recovery (Latest version is 1.5.2 as of this post)
    http://xdaforums.com/showthread.php?t=561124

    MD5SUMS - thanks march83!
    hboot-1.76.2007.img 841eebbffaead7296a50a39920ec30a2
    Radio_HTC_PVT_32A_6.35.10.18.img 246a858689a19975bfdcfa5538401c5f

    Notes:
    - This Radio and SPL is only for the new Sense UI ROMs (CursorSense32A)
    - The Hero recovery is required for the new radio. The Sapphire H (Magic 32A) recovery will reboot after a few seconds.
    - To select items using the Hero recovery, you need to use the green Talk/Send key on your device. The trackball select key will not work.

    Steps:
    - Download the files above onto your computer. Save them in the same folder (C:\AndroidSDK\Tools for example)
    - Turn off your phone
    - Power it on into recovery (hold Home and press Power)
    - Run a full nandroid backup (optional, but recommended)
    - Turn off your phone
    - Power it on into FASTBOOT mode by holding Back and pressing Power
    - Plug in a USB cable. you should see FASTBOOT USB on the screen
    - From a command prompt, navigate to the folder where you saved the files above.
    - Type in these commands:
    Code:
    fastboot flash radio Radio_HTC_PVT_32A_6.35.10.18.img
    fastboot flash hboot hboot-1.76.2007.img
    fastboot flash recovery recovery-RA-hero-v1.5.2.img
    fastboot erase system -w
    fastboot reboot-bootloader
    - Your phone will reboot back into FASTBOOT.
    - Verify that you now have the 6.35.10.18 Radio and 1.76.2007 SPL.

    CONGRATULATIONS! You can now flash the CursorSense32A ROM!

    There will be other ROMs soon that use this Radio and SPL. It's just a matter of time.

    Upgrade from 6.35.07.29 to a new version

    You can upgrade radio version from 6.35.07.29 to 6.35.08.29 or 6.35.10.18 without wiping, reflashing or losing any data.

    - Download the radio image
    6.35.08.29
    6.35.10.18
    - Save the radio update.zip file to the root of your SD card.
    - Boot into Recovery mode, using Home and Power and apply the update like you would any other update.zip file.

    Downgrade (Revert back to) 32A 3.22 Radio and SPL

    You will need:
    - 1.33.2010 Engineering SPL HBOOT image
    http://www.theandroidkitchen.com/fileshare/Sapphire-32A-Updates/?download=hboot-1.33.2010.img
    - 3.22.20.17 Radio image
    http://www.theandroidkitchen.com/fi...es/?download=Radio_HTC_PVT_32A_3.22.20.17.img
    - Amon_RA Sapphire H Recovery (Latest is 1.5.2 as of this post)
    http://xdaforums.com/showthread.php?t=530492

    Steps:
    - Download all of the files to the same folder (C:\AndroidSDK\tools for example)
    - Turn off your phone
    - Power it on into FASTBOOT by holding Back and pressing Power
    - In a Command Prompt, navigate to the folder you saved the files in
    - Type in these commands:
    Code:
    fastboot flash radio Radio_HTC_PVT_32A_3.22.20.17.img
    fastboot flash hboot hboot-1.33.2010.img
    fastboot flash recovery recovery-RA-sapphire-v1.5.2H.img
    fastboot erase system -w
    fastboot reboot-bootloader
    - Your phone will reboot back into FASTBOOT
    - Verify that you now have 3.22.20.17 SPL and 1.33.2010 SPL

    If you have any issues at all, please report them in this post. If you failed to read this post and expect help from any of the community members, expect to be royally flamed!

    Happy modding!

    Thanks to:
    Amon_RA for the Recovery image and the "Take Me Back" steps
    MoDaCo for finding the 1.76.2007 SPL for Hero that also works on Magic!
    1
    My gf has a MyTouch 3g 1.2 (with 3.5mm jack) will this radio spl work for it? I have it rooted with SPL off and Amon_RA 1.70 recovery installed

    I'm fairly familiar with rooting and radios just a little confused when it comes to this phone since it appears there are 3-5 slightly different models of it.

    Thanks,
    B
    1
    Resolved

    Thanks to ezterry's post http://xdaforums.com/showthread.php?t=918438. I Finally resolved the crisis.

    Here is what I did.

    1. Used Goldcard and flashed sappimg.zip giving me 32B eng. S-OFF mode
    2. Flashed Radio 2.22.28.25, Amon-RA-recovery (clockwork used to work, now it won't boot, for some odd reason)
    3. Boot into recovery and install Yoshi 1.5 (for 32B) and auto-boot-2.6.35.14-farmatito-pershoot-ds+-20110802.zip (this installed ebi0 based kernel).
    4. rebooted back into recovery
    5. from recovery installed update.SPL_Original_1.33.0013-signed.zip
    6. reboot into recovery (that should finish installing the SPL)
    7. from recovery installed update-1_33_0013-to-1_33_0013d_S.zip
    8. reboot into recovery, just to finish the SPL install and still be sure that recovery survived the process.
    9. reboot into fastboot to check the radio and SPL.
    10. reboot the device.

    Works great now.
    fastboot now reads
    SPL/hboot version: 1.33.0013d.
    Radio version: 2.22.28.25.
    Main software version: 2.53.707.2.
    cid: t-mob010.
    cpld: 13.
    product: sapphire.
    mid: sapp31000.
    security: on.
    build-mode: ship.

    Lessons learned:
    1. Be eternally grateful to developers who put in so much effort into making all the stuff at XDA and other places available.
    2. http://xdaforums.com/showpost.php?p=11696755&postcount=41