ClockworkMod Recovery 3.0.0.5

Did it install correctly for you?

  • Yes

    Votes: 53 62.4%
  • No

    Votes: 32 37.6%

  • Total voters
    85
  • Poll closed .
Search This thread

rubyknight

Senior Member
Sep 19, 2010
594
132
Sevierville TN
Good day, looking for recovery image for Huawei U8510 Ideos X3.

Thanks

o_O Then what the h_ll are you doing on an outdated HTC Hero thread that died months ago. Google it and see what you can find for your own phone.

Edit: Err.. Tablet.. Unrooted tablet to boot I think from what I can find on my phone.. Wait for a dev to root it before anything else

Sent from my wildheroc using XDA Premium App
 
Last edited:

Lino.

Senior Member
Dec 14, 2009
184
6
This is the latest ClockworkMod Recovery!! Instructions to install below :D

Flash recovery using: H-Boot/S-Off Only

Download HERCIMG.zip
md5: 6dcd265a51cc7090824d7f9f889b370b
Move HERCIMG.zip to root of the SD card.
Power off the phone.
Hold the Volume Down and Power buttons until the phone boots into the bootloader.
Wait for bootloader to scan and find HERCIMG.zip.
Press action to install.

The phone should now reboot into the ClockworkMod Recovery (orange text for 3.0+).



http://www.mediafire.com/?2gwhom1m06tbboy - ClockworkMod Recovery 3.0.0.5
http://www.mediafire.com/?u86sj1w22db8kbt - HERCIMG.zip

thanks to romrepo.info/wiki

Help, this is not working for me.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    This is the latest ClockworkMod Recovery!! Instructions to install below :D
    Downloads At bottom of page.

    I am not responsible if you brick or damage your phone... blah blah blah... NANDROID FIRST cuz u never know wut might happen XD.


    Method I

    Flash recovery using: ADB

    NOTE: This method will work while you are booting into the current recovery on the phone.

    Download ClockworkMod Recovery 3.0.0.5
    Copy the recovery.img to root of the SD card.
    Boot the phone into recovery.
    Open command prompt.
    Change directory to the AndroidSDK directory & type the following commands:

    adb shell
    mount sdcard
    flash_image recovery /sdcard/"name of recovery".img
    reboot recovery

    Your phone should now reboot into the ClockworkMod Recovery (orange text for 3.0+).


    Method II

    Flash recovery using: RomManager

    Download ClockworkMod Recovery 3.0.0.5
    On the SD card, go to: /clockworkmod/download/mirror.sea.tdrevolution.net/cm/recoveries.
    Rename the old image there named recovery-clockwork-2.5.0.7-heroc.img to recovery-clockwork-2.5.0.7-xxx.img.
    Move recovery-clockwork-3.0.0.5-heroc.img to that folder and rename it to recovery-clockwork-2.5.0.7-heroc.img.
    Open RomManager and press Flash ClockworkMod Recovery and reboot the phone to recovery, you should see the orange text.


    Method III



    Method III

    Flash recovery using: H-Boot/S-Off Only

    Download HERCIMG.zip
    md5: 6dcd265a51cc7090824d7f9f889b370b
    Move HERCIMG.zip to root of the SD card.
    Power off the phone.
    Hold the Volume Down and Power buttons until the phone boots into the bootloader.
    Wait for bootloader to scan and find HERCIMG.zip.
    Press action to install.

    The phone should now reboot into the ClockworkMod Recovery (orange text for 3.0+).



    http://www.mediafire.com/?2gwhom1m06tbboy - ClockworkMod Recovery 3.0.0.5
    http://www.mediafire.com/?u86sj1w22db8kbt - HERCIMG.zip

    thanks to romrepo.info/wiki
    1
    I tried method 2 and method 3 above without success. Trying to go from 2.5.0.1 to 3.0.0.5. Attempts to boot into recovery and then reboots again and boots normally. Suggestions?

    don't flash the 3.0.0.5, you don't need it for GB. the reason I think people have been having so much trouble is that the recovery is overclocked, so some phones can't handle it. same thing goes for the GB rom, if it loops and hangs etc., just flash a capped 691 kernel after the rom and gapps, it *should* work.

    OK NOW - TO ALL FUTURE POSTS - PLEASE DON'T, LOL.
    AOSP MADE THIS RECOVERY AND IS CONSTANTLY UPDATING IT
    3.0.0.5 CAN BE FOUND IN THE 2.3 GINGERBREAD THREAD
    INSTALL METHODS CAN BE FOUND ON THE THREAD "READ ME" WIKI,
    DIFFERENT VERSIONS CAN BE FOUND ON ROMREPO.INFO
    1
    aside from 3.0.0.5 being overclocked what are the changes over previous versions?

    Color

    posted via tapatalk
    1
    aside from 3.0.0.5 being overclocked what are the changes over previous versions?

    Color

    posted via tapatalk

    And EXT4 support and edify scripts ;)
    1
    And EXT4 support and edify scripts ;)

    and a "power off" option in recovery