[KERNEL] AnThRaX #04 - [ICS] Universal Sense / AOSP / AOKP | +slide-2-(un)lock +beats

Status
Not open for further replies.
Search This thread

kittykat858

Senior Member
Mar 26, 2011
1,708
5,830
AnThRaX KeRnEl - UNIVERSAL ICS
...if its ics, this kernel should run it, sense 4, miui4, sense 3.6, aokp, cm9, ics-aosp, etc


Public (no log in required) Download Info -> http://www.androidfilehost.com/main/EVO_3D_Developers/chad.goodman/KERNELS - XDA (PUBLIC KERNELS)/

Most of the modifications I am using are coming from my sensation ICS/Sense 3.6 / Sense 4.0 kernel. This kernel has been in use for over 1 month, and no issues have been reported, other than battery drain...seems to be the story with all my kernels...

Thanks: (adding more every day)
Code:
twistedumbrella - the idea of having 2 sets of wifi drivers in the same kernel...sorry I doubted you...
Developers who tested and provided feedback: aaronpoweruser, freeza, newtoroot
Dedicated Testers: eternity-3d

Base Features
Code:
-100% Sense 4.0 compliant GPU drivers (beta version from qualcomm)
-Sense 4 Animations work, you do not need to disable them
-Sweep-2-(un)lock built into the kernel, no need for PGM from the market
-two wall call record
-96khz / 24 bit audio processing - all 100% offloaded from cpu
-System Wide BEATS support, not just htc music app
-CPU thermal throttling done @ kernel level, you may remove THERMALD services
 from the rom
-NOOP as default IO scheduler / File System Hacks
-Additional CPU Governors / -Over/Under Volt
*some features may require additional support from the rom

Known Issues
Code:
Generic ICS (including sense 4.0 port, aosp,aokp)
-slide2(un)lock disabled until its fixed

HTC LEAK specific (sense 3.6)
-slide2(un)lock disabled until its fixed
-3d camera
-3d viewing
-usb (mass storage and adb)
-OCing past 1.51 causes reboot

Change Log
Code:
RLS5  (generic ICS)---AND---
AnthraX-htcleak-rls1 (Sense 3.6 specific)
-fixed bluetooth drivers (sense 4.0)
-fixed usb otg (sense 4.0)
-updated gpu drivers (sense 3.6 and 4.0)
-sense 3.6 charging enabled
-sense 3.6 wifi and BT drivers

RLS4
-fixed sleep issue, phone sleeps good now

RLS3
-universal zip file for sense 4.0 /sense 3.6 / pure aosp / aokp roms
-Added back in Rezound Audio Drivers  
--> includes support for system wide BEATS, even over BT and Internal Speaker
-Beats is enabled for AUX jack only
-enabled 2-way-call-record
-some minor fixes to GPU drivers
-fixed cpu hot plug issues where CPU1 stayed offline

RLS2-MINUS BEATS
-added NEW beats, but disabled via DEFCONFIG
-disabled slide-2-(un)lock for now via DEFCONFIG
-removed rezound audio drivers, replaced w/ sensation linux 3 audio drivers
---> this fixed ALL audio issues, including hearing the other person during phone calls

RLS2
-Release 2 and later is 100% -o3 optimized compiled with GCC 4.6.2
-Gingerbread BCM4329 AOSP WiFi Drivers (WiFi works now)
-Updated to KGSL 3.9 BETA gpu drivers from qualcomm
-fastcharge patch from chad0989
-slide to (un)lock built in - no need for the market PGM app
-my sweet ass cpu table
-ext4 and ext3 tweaks
-support for: ntfs (2TB limit), cifs, tun/vpn, wifi calling
-full beats (system wide support, not just htc music)
-full rezound base audio drivers (support for beats over internal speaker)
-internal THERMALD processing, no need for rom side support
-additional cpu governors with my settings
-2phase on-demand from the rezound
<<<REMOVED>>> usb hostmode/otg support with usb mass storage drivers - CAUSED ERRORS W/ AOSP USB DRIVERS
*some features may not work unless the rom supports them, and i hope this rom does :)  

RLS1a..blah...blah..
WiFi changes and audio fixes

RLS1
-100% AOSP Qualcomm base
-KGSL 3.8 drivers 
   + sense 3.6 / 4.0 extensions from qualcomm
   + SBA43 compatibility mode (dont ask why, i was told to put it in there)
-ICS bcmdhd wifi drivers (may need to switch to bcm4329)
-ICS AOSP BT drivers



[SIZE="1"]based off of this source - > [url]http://code.google.com/p/anthrax-sensation-ics-sense40/[/url]
full source can not be disclosed due to an active NDA and closed source code used.
[/SIZE]
 
Last edited:

powduh09

Senior Member
Feb 17, 2011
1,270
704
Dallas, NC
Chad... You're awesome... Been running your kernels since I first rooted my 3D... I don't know how you do what you do... But I'm thankful... Keep it up bro...

Sent from my PG86100 using xda premium
 

HVAC Wars

Senior Member
Jul 4, 2010
165
33
Campbell
I can't wait to get animations working on my Rezound. This thing is smooth.

Sent from my EVO 3D S using XDA Premium App
 

thedawn2009

Senior Member
Jan 6, 2010
383
298
St. Louis
This kernel is zippy using newts sense 4. Only took 1 reboot to get WiFi to turn on and connect. Animations are fixed and currently zero lag. Phone is hw002

Sent from my newted EVO 3d
 

LiquidSolstice

Inactive Recognized Developer
Jan 17, 2008
5,182
5,181
Chad, not sure if this is an error on the kernel side or the ROM side, but every time I end a phone call, the touch screen stops working. The only way to get it working again seems to be clearing the dalvik and cache and rebooting.

The only real clue/hint I can give you is that after the phone is hung up and I'm stuck at the lockscreen because I'm unable to pull the ring up, if I use the volume buttons, it says I'm controlling the media volume, even though it should be saying I'm controlling the ringer volume. Any and all ideas would be awesome :)
 

Astrikz

Senior Member
Mar 27, 2012
1,282
566
Im stuck on obtaining IP address when trying to connect to wifi. I'm on newts one s. I know the IP states wifi is working but I didn't know if he meant form one s or unicorn porn. Any suggestions to fix this problem would be helpful
 
Status
Not open for further replies.

Top Liked Posts

  • There are no posts matching your filters.
  • 66
    AnThRaX KeRnEl - UNIVERSAL ICS
    ...if its ics, this kernel should run it, sense 4, miui4, sense 3.6, aokp, cm9, ics-aosp, etc


    Public (no log in required) Download Info -> http://www.androidfilehost.com/main/EVO_3D_Developers/chad.goodman/KERNELS - XDA (PUBLIC KERNELS)/

    Most of the modifications I am using are coming from my sensation ICS/Sense 3.6 / Sense 4.0 kernel. This kernel has been in use for over 1 month, and no issues have been reported, other than battery drain...seems to be the story with all my kernels...

    Thanks: (adding more every day)
    Code:
    twistedumbrella - the idea of having 2 sets of wifi drivers in the same kernel...sorry I doubted you...
    Developers who tested and provided feedback: aaronpoweruser, freeza, newtoroot
    Dedicated Testers: eternity-3d

    Base Features
    Code:
    -100% Sense 4.0 compliant GPU drivers (beta version from qualcomm)
    -Sense 4 Animations work, you do not need to disable them
    -Sweep-2-(un)lock built into the kernel, no need for PGM from the market
    -two wall call record
    -96khz / 24 bit audio processing - all 100% offloaded from cpu
    -System Wide BEATS support, not just htc music app
    -CPU thermal throttling done @ kernel level, you may remove THERMALD services
     from the rom
    -NOOP as default IO scheduler / File System Hacks
    -Additional CPU Governors / -Over/Under Volt
    *some features may require additional support from the rom

    Known Issues
    Code:
    Generic ICS (including sense 4.0 port, aosp,aokp)
    -slide2(un)lock disabled until its fixed
    
    HTC LEAK specific (sense 3.6)
    -slide2(un)lock disabled until its fixed
    -3d camera
    -3d viewing
    -usb (mass storage and adb)
    -OCing past 1.51 causes reboot

    Change Log
    Code:
    RLS5  (generic ICS)---AND---
    AnthraX-htcleak-rls1 (Sense 3.6 specific)
    -fixed bluetooth drivers (sense 4.0)
    -fixed usb otg (sense 4.0)
    -updated gpu drivers (sense 3.6 and 4.0)
    -sense 3.6 charging enabled
    -sense 3.6 wifi and BT drivers
    
    RLS4
    -fixed sleep issue, phone sleeps good now
    
    RLS3
    -universal zip file for sense 4.0 /sense 3.6 / pure aosp / aokp roms
    -Added back in Rezound Audio Drivers  
    --> includes support for system wide BEATS, even over BT and Internal Speaker
    -Beats is enabled for AUX jack only
    -enabled 2-way-call-record
    -some minor fixes to GPU drivers
    -fixed cpu hot plug issues where CPU1 stayed offline
    
    RLS2-MINUS BEATS
    -added NEW beats, but disabled via DEFCONFIG
    -disabled slide-2-(un)lock for now via DEFCONFIG
    -removed rezound audio drivers, replaced w/ sensation linux 3 audio drivers
    ---> this fixed ALL audio issues, including hearing the other person during phone calls
    
    RLS2
    -Release 2 and later is 100% -o3 optimized compiled with GCC 4.6.2
    -Gingerbread BCM4329 AOSP WiFi Drivers (WiFi works now)
    -Updated to KGSL 3.9 BETA gpu drivers from qualcomm
    -fastcharge patch from chad0989
    -slide to (un)lock built in - no need for the market PGM app
    -my sweet ass cpu table
    -ext4 and ext3 tweaks
    -support for: ntfs (2TB limit), cifs, tun/vpn, wifi calling
    -full beats (system wide support, not just htc music)
    -full rezound base audio drivers (support for beats over internal speaker)
    -internal THERMALD processing, no need for rom side support
    -additional cpu governors with my settings
    -2phase on-demand from the rezound
    <<<REMOVED>>> usb hostmode/otg support with usb mass storage drivers - CAUSED ERRORS W/ AOSP USB DRIVERS
    *some features may not work unless the rom supports them, and i hope this rom does :)  
    
    RLS1a..blah...blah..
    WiFi changes and audio fixes
    
    RLS1
    -100% AOSP Qualcomm base
    -KGSL 3.8 drivers 
       + sense 3.6 / 4.0 extensions from qualcomm
       + SBA43 compatibility mode (dont ask why, i was told to put it in there)
    -ICS bcmdhd wifi drivers (may need to switch to bcm4329)
    -ICS AOSP BT drivers
    
    
    
    [SIZE="1"]based off of this source - > [url]http://code.google.com/p/anthrax-sensation-ics-sense40/[/url]
    full source can not be disclosed due to an active NDA and closed source code used.
    [/SIZE]
    38
    Reported kernel as GPL violation. NDA or not, you cannot agree into an NDA and distribute kernels which contain source code provided by others. Unless you wrote the entire kernel from scratch, without viewing or using the Linux kernel, your NDA means you cannot distribute the kernel.

    i know i have been told NOT to repsond to crap like this, but i had to this time... might be on a 30 day vacation again, but here it is:

    some points:
    -there is some source on github. (and google code also)
    -why not go after then other 80% of non gpl compliant kernels. yes 8 out of 10 kenrels i have looked at in various msm8x60 threads are NOT 100% gpl compliant, of those 8, 4 wont even compile. wait -i know the answer: cause the have not done what i have done (audio, bluetooth, performance, sense 4, sense 3.6)
    -why not be on HTC for this source.... dont be mad cause i released a kernel before HTC even released source. I even had a kernel that 100% worked with 2.17 based roms BEFORE htc released source.... dont get mad cause u cant do that..
    ...you know - when another developer in the sensation forums did what i did w/ a leaked rom - he claimed the kernel was hex-edited, and the moderators there were 100% ok with that just because of the fact that HTC had not released source yet... even the community there backed him up, and allowed him not to publish source because "he does so much for the community"
    -my NDA clearly states i can released compiled binaries
    -why is it when i do something, people cry gpl - i release source (minus beats) - then magically other developers (well known ones) come up with a kernel like mine, same fixes and what not, weeks later - and accuse me of kanging them - and the community backed THEM up.

    go ahead and report my post - you wont be the 1st or last - but as a RD you should know better than to come here and trash/troll my thread - so YOU have been reported as well. now since you PMed a moderator, and reported my thread - there is NO reason for you to continue to be here. good day.

    but before you go, how did you even become a RD, you seem to have only created 2 posts...both are guides
    no kernels, no roms, no anything... when i applied, they didnt seem to care what projects i worked on, they cared about what i have done, what threads i created, and what work i created.

    really1.png
    35
    closing thread for now - too many emails in my gmail over gpl and threats of legal action

    trolls: instead of using fake email accounts- use the PM feature of XDA so the mods can ban your ass... just be sure to make the same threats and use the same language in ur xda PMs as you do in ur emails

    stand by for some ip addresses of where these emails came from

    9 email addresses share TWO ip addresses...

    95.222.40.xxx (x2 different email addresses)
    unitymediagroup.de

    80.141.75.xxx (x7 different email addresses)
    t-dialin.net (t-mobile)

    your emails have been reported to your ISP for the threats made
    i did network security for several years... yes i can back trace emails... it was part of my job.
    25
    i re-read my NDA, looked at what i posted here on xda (make sure i was following the terms of the nda)
    and with my "hex-edited" kernel - and my other ones, im in the clear


    any and all gpl issues should be discussed via PM with pulsar_g2 (admin), egzthunder1 (admin), or pstevep (moderator) and NOT on my thread.

    if you wanna send me a msg, do it via XDA's PM feature, not via email using fake email accounts, yes - I know anyone can open outlook - and change the "from" or "reply to" email address..

    re-opened thread
    11
    to those making threats and what not via gtalk/email/etc re: source to my kernels


    read my OP. there is a link to my "base source" and a little notice about closed source stuff in my kernel - still have concerns, PM pstevep, egzthunder, or pulsar_g2 -- or be a man and post here for ALL to see your concerns or PM me thru XDA, why hide behind fake yahoo and hotmail accounts?


    i personally don't care what your gonna do if i dont disclose 100% full source - and it is YOU who is delaying the release of a fully working sense 3.6 kernel for the new leak - why? cause i dont give a fu$$ if it ever gets posted or shared, nor do i need the headache it will cause if i do post or share.

    i got everything, including usb working - still working on 3d camera though