Testing your profiles now will report back later :thumbup:
Sent from my variant 1 H3G One X, Renovated with XM power!
Sent from my variant 1 H3G One X, Renovated with XM power!
Testing your profiles now will report back later :thumbup:
Sent from my variant 1 H3G One X, Renovated with XM power!
Is anyone else getting into bootloops after rebooting? I had to turn off set on boot in trickster mod to stop it!
Also I have a really bad frame rate when benchmarking in epic citadel!
EDIT: I think clearing app data for trickster mod fixed it, added back its required settings too, frame rate is lower than usual (43 usually 47+) but at least its working now and not giving me a score of 12fps lol
Sent from my variant 1 H3G One X, Renovated with XM power!
- Gaming works perfect now
- Added profile for 2d games
- Added profile for safety ( over heating to prevent it 2 steps )
- Added more apps into profiles
- Changed freqs on some things for better performance/battery life
- Some other stuff i can't remember right now lol
A question for your last update regarding SetCPU profile. What governor do I use? Smartmax right? And then tune it? Am I correct?
Yeah i was going too , i'll upload it shortly with simple guide for it since we gotta chage few things for this to make it work with Trickster.
@GuyAdams
I've tested that greenify app , seams like it's working :good: , it's actually very good thing to have on the phone imho , should grant 5-10% more battery life in overall , depending on your apps.
Htc sense profile make app drawer lag a bit
Sent from my HTC One X using xda app-developers app
Shan, I noticed that after a reboot, the governor settings aren't applied. I need to uncheck enable profiles in setcpu and then enable them again.
Sent from my HTC One X using xda premium
I'm getting great results using the profiles on setcpu. I'm just in the middle of sorting out more of my apps now. It's a great guide as to be honest I was getting confused before!
Sent from my HTC One X using Tapatalk 2
I just realized i can just use Tasker to change clock & governor automatically when launching games. *headdesk* :cyclops:
So far I'm on my first battery cycle and very happy
Htc One X Viper 3.4.2
, open it , the default value is
and SAVE make sure to enable *system as writable*
S2W Configs:
Turn off:
Code:
Or you can download "Sweep2Wake-Widget" from Google Play.
Button panel locks to s2w after this distance:
Code:
Screen turns on/off after this distance:
Code:
Direction independent(1 - Yes, 0 - No):
Code:
DoubleTap2Wake Configs:
Turn on:
Code:
Activate fast charge:Code:
Enable smartdimmer:Code:
To get your variant:Code:
(Or see it in a root explorer)
cpu_process_id is your variant.
3D Tuning:If you want to change clocks, you have to write the whole clock table again, from up to down. In case you want to reset to default, this is it:
Code:
echo '520 520 520 520 492 484 380 247' > /sys/devices/system/cpu/cpu0/cpufreq/gpu_oc
If you want to set them at boot, use an init script. Here is one. Just copy to /system/etc/init.d and set the permissions to executable by everyone with a root explorer. (Thx to Byrana)
Here is a flashable script that will work on newer kernels too for everyone. It also enables fast_charge. (Thx again Byrana)
2D Tuning:If you want to change clocks, you have to write the whole clock table again, from up to down. In case you want to reset to default, this is it:
Code:
echo '520 520 520 520 492 484 380 247' > /sys/devices/system/cpu/cpu0/cpufreq/two_d_oc
You should NOT OC this higher than 3D.
EMC Tuning:If you want to change clocks, you have to write the whole clock table again, from up to down. In case you want to reset to default, this is it:
Code:
echo '667 667 667 667 408 408 408 408' > /sys/devices/system/cpu/cpu0/cpufreq/emc_oc
If you want to OC let's say to 800MHz:
Code:
echo '800 800 800 800 667 667 408 408' > /sys/devices/system/cpu/cpu0/cpufreq/emc_oc
Interface:Auto-BLN Control:
Values:
0: BLN OFF/Green led ON
1: BLN ON/Green led ON
2: BLN ON/Green led OFF
Example:
Turn off Auto-BLN:
Code:
The changes will apply from the next notification.
Backlight button brightness:Interface:
Values:
0-255: 0 is off, 255 is the maximum possible.
Example:
Code:
The changes will apply from the next backlight turn on.
GPU Voltage control:If you want to enable this you should write '1' to /sys/devices/system/cpu/cpu0/cpufreq/gpu_voltage.
In command line that is:
Code:
After that you need to restart your voltage control app (Trickster Mod).
Now you will see the GPU frequencies multipled by 1000 to separate them from the CPU frequencies. So you will see 520000MHz, etc.
Be advised that there are a really few HOX's that can handle more UV on Core, than the preset 50.
Also incrasing your Core voltage over 1300mV is NOT ADVISED AT ALL. Almost everything uses this voltage on your motherboard.
If you want to enable the values at boot, you need an init script that enables it, so later Trickster mod or anything can set them.
LP OC:Interface:
Values:
0: LP OC OFF
1: LP OC to 620MHz
Example:
Turn on LP OC:
Code:
Audio Min. Freq.:Interface:
Example:
Change audio min. freq. to 204MHz:
Code:
echo 204000 > /sys/module/snd_soc_tlv320aic3008/parameters/audio_min_freq
Save settings:
If you want any of the above settings saved, you can use Ibas21 recovery package
XM 188v2 with your PMC v7 performance version gave me the best results ever. period. thank you :highfive:
now v241 on Viper 3.4.0 with row and pmc gov, UC at 1200 and the rest like Shan89 sayed in previus page ... Unthinkable how much improves in performance and batt life <3 Xmister and Shan89
U r superb dude! U are gifted! Damn u r sooo good in this....(^~^)/
Sent from my HTC One X using Tapatalk 2
im using the the new kernel with viperx 3.4.0 and all pmc settings, phone is amazing FB app is working i didnt see any problem till now this is the best kernel i tried till now from all the passed weak!
All thanks go to Xmister and Shan89
- Gaming works perfect now
- Added profile for 2d games
- Added profile for safety ( over heating to prevent it 2 steps )
- Added more apps into profiles
- Changed freqs on some things for better performance/battery life
- Some other stuff i can't remember right now lol
[*]New - for MAX Speed when not using apps listed in profiles set in trickster & SetCPU Max Freq 1300 ( For absolute max performance 1500 ) min 51 INTERACTIVE governor and DEADLINE Scheduler. What will this do: Well simply it'll use max freq 1300 / 1500 depends on your choice whenever you're using something that is not listed in the profiles E.G. when you hit *Settings* it'll use interactive + deadline , same goes for other things that are not listed in the profiles.
[*]If you do full reboot make sure to open SetCPU app so profiles start working after the reboot.
[*]For 2d games *temple run* Etc just add them into *2d gaming profile*
[*]Tip for heavy 3d games sucha are Mc4 NFSMW , RR3 etc etc , i've set on 1300 max CPU freq so we avoid heat etc , note that those games are on MAX DETAILS for me and i don't have laggs so you guys who use those games without those details you should be fine in fact you can change max freq from the profile onto 1200 if you like. If you play some other 3d heavy games just add them in *Gaming* profile.
[*]A Tip for gaming with low details: Change the max freq from my profiles to 1100/1000 , i played NFSMW on max details with some FPS Drops on 1000mhz freq.
[*]@Those who use more social apps then facebook , simply add those apps in my profile where is facebook. If you use another messaging apps simply add them to my messages profile. Do the same to the other apps that you use which are similar to the apps in my profiles.
SetCpu > Profiles > click on the profile > Next > Untick *Show a notification* and that's it , do the same for other profiles.
Boost_freq: 620
Ideal_freq: 340
max_cpu_load: 90
min_cpu_load: 50
touch_poke_freq 620
Smartdimmer: ON
Multicore power saving 2
GPU Max freq: 416
Undervolt how much you can.
[*]After you apply the PROFILES and you don't use INVERTED BLACK FACEBOOK APP delete that from profile and add the facebook app you use.
- As for your own apps just go to profiles and add those apps into profile you like.
Well it's a start
Thanks mate, I would love to see your setup profiles as well but no problem, that can wait till later.
Great going, looking forward to trying..
*****************
Sent from a tin of baked beans using some chewing gum, tinfoil, a piece of string and a manual written by MacGyver.