I have one problem headphones or radio jack DONT work in 20121215 ROM
Sent from my GT-P1000N using xda app-developers app
Sent from my GT-P1000N using xda app-developers app
Can anyone try this p1 build before I officially post it?
No pdroid yet. But CM10.1 is looking good.
i go to try
---------- Post added at 05:54 PM ---------- Previous post was at 05:44 PM ----------
The same.. dont boot..
The same.. dont boot..
hen i update, before i boot, one message apears tell me to fix boot..
back to humberos 2012.12.12 and another fix boot option i need to do..
@ Humberos
Reasons for my last reboots i dont format system before flashing your rom. So did full wipe yesterday, format system and install your rom. Hope to get less reboots or system crashes now. :fingers-crossed:
Thanks for your rom from 12/12/12, i like this very much! Best rom i ever had, very smooth and nice extra settings. Best battery experience. I normaly use GreenPower Premium to save battery but android 4.2 did very good job, so now i just use android standard settings to save battery.
AnTuTu Benchmark with 1.2 GHz 3807 and 1.4 GHz 4055. Nice feature: with cm10 and your kernel i can use 1.4 GHZ without freeze or reboots.
Can we hope to get new release of your great rom soon?
@humberos, @alroger. Hi sir, I'm testing the new feature of this kernel and module for Pl2303. I was able to insmode pl2303, in turn the adapter is connected to ttyUSB0 but still I cannot console my cisco router using microcom.
I have also tried to use third party apps Slick USB 2 Serial, my adapter was detected but still no communication from my cisco router.
Please see below the commands I issued and its output.
C:\>adb shell
root@android:/ # lsusb
lsusb
Bus 001 Device 001: ID 1d6b:0002
Bus 001 Device 002: ID 067b:2303 -this is my USB to Serial Adapter
255|root@android:/ # insmod /system/lib/modules/pl2303.ko
insmod /system/lib/modules/pl2303.ko
root@android:/ # dmesg | grep usb
dmesg | grep usb
[ 0.000000] sclk_cam: source is xusbxti (1), rate is 24000000
[ 0.317400] usbcore: registered new interface driver usbfs
[ 0.317599] usbcore: registered new interface driver hub
[ 0.317893] usbcore: registered new device driver usb
[ 0.635750] sec_switch_init_work : initial usb_sel(1), uart_sel(0)
[ 2.319704] usbcore: registered new interface driver cdc_acm
[ 2.320147] usbcore: registered new interface driver usb-storage
[ 2.320558] usbcore: registered new interface driver usbserial
[ 2.320942] usbcore: registered new interface driver usbserial_generic
[ 2.321119] usbserial: USB Serial Driver core
[ 2.321510] usbcore: registered new interface driver ftdi_sio
[ 2.323033] android_usb gadget: android_usb ready
[ 2.326861] Registered gadget driver 'android_usb'
[ 2.327498] android_register_function usb_mass_storage
[ 2.328162] android_usb gadget: using random self ethernet address
[ 2.328273] android_usb gadget: using random host ethernet address
[ 2.329441] usb0: MAC 96:2c:53:e0:95:9a
[ 2.329541] usb0: HOST MAC ee:f4:92:c2:64:cb
[ 2.330035] android_usb gadget: Mass Storage Function, version: 2009/09/11
[ 2.330140] android_usb gadget: Number of LUNs=2
[ 2.331905] usbcore: registered new interface driver xpad
[ 2.784458] usbcore: registered new interface driver usbhid
[ 2.784559] usbhid: USB HID core driver
[ 8.090870] init: processing action 0x30d70 (property: persist.sys.usb.conf
ig=*)
[ 8.091174] init: processing action 0x359b8 (property:sys.usb.config=mass_
storage)
[ 121.671266] usb usb1: default language 0x0409
[ 121.671440] usb usb1: udev 1, busnum 1, minor = 0
[ 121.671522] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 121.671668] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumb
er=1
[ 121.671752] usb usb1: Product: S3C OTGHCD
[ 121.671895] usb usb1: Manufacturer: Linux 2.6.35.13-HumberOS-gd3c3143 EMSP
_OTGHCD
[ 121.671979] usb usb1: SerialNumber: s3cotg
[ 121.679535] usb usb1: usb_probe_device
[ 121.679628] usb usb1: configuration #1 chosen from 1 choice
[ 121.679802] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 121.680862] hub 1-0:1.0: usb_probe_interface
[ 121.681012] hub 1-0:1.0: usb_probe_interface - got id
[ 121.688611] => OTG HCD Initialized HCD, bus=C110 OTG Controller, usbbus=1
[ 122.053186] usb 1-1: new full speed USB device using s3c_otghcd and addres
s 2
[ 122.178589] usb 1-1: default language 0x0409
[ 122.179015] usb 1-1: udev 2, busnum 1, minor = 1
[ 122.179194] usb 1-1: New USB device found, idVendor=067b, idProduct=2303
[ 122.179298] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumbe
r=0
[ 122.179479] usb 1-1: Product: USB-Serial Controller D
[ 122.179578] usb 1-1: Manufacturer: Prolific Technology Inc.
[ 122.180636] usb 1-1: usb_probe_device
[ 122.180745] usb 1-1: configuration #1 chosen from 1 choice
[ 122.181030] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[ 122.181668] usbserial_generic 1-1:1.0: usb_probe_interface
[ 122.181848] usbserial_generic 1-1:1.0: usb_probe_interface - got id
[ 175.259165] pl2303 1-1:1.0: usb_probe_interface
[ 175.259313] pl2303 1-1:1.0: usb_probe_interface - got id
[ 175.266025] usb 1-1: pl2303 converter now attached to ttyUSB0 ; adapter is attached to ttyUSB0
[ 175.266181] usbcore: registered new interface driver pl2303; after is issued insmod
[ 185.291646] active wake lock usb_otg
root@android:/ # lsmod
lsmod
pl2303 10646 0 - Live 0xbf05b000
bcmdhd 334894 0 - Live 0xbf007000
vibrator 5875 0 - Live 0xbf000000
root@android:/ # microcom -s 9600 /dev/ttyUSB0
microcom -s 9600 /dev/ttyUSB0
^X
root@android:/ #
This is what I see in SGS2: kindly see in red font
app_90@android:/ $ lsmod
ftdi_sio 30893 0 - Live 0xbf049000
dhd 423168 0 - Live 0xbf0e7000
j4fs 69655 1 - Live 0xbf068000
pl2303 11115 0 - Live 0xbf061000
usbserial 30437 2 ftdi_sio,pl2303, Live 0xbf053000
cifs 245998 0 - Live 0xbf00b000
Si4709_driver 27055 0 - Live 0xbf000000
app_90@android:/ $
I think we're almost there in attaining this feature.
Hope you can check this.
BTW, keyboard, mouse and usbstick (FAT32) runs successfully in your ROM (cm10.1 12th December)
Thanks in advance.
Sorry for noob question
in that bold, it's mean you use USB OTG?
did you mean ROM(cm10.1 12th December) is from here? http://cafe-ti.blog.br/1956~cm10-1-sgt7-p1000.html
FYI: http://xdaforums.com/showpost.php?p=35795666&postcount=56
Patches:
http://review.cyanogenmod.org/28189
http://review.cyanogenmod.org/28297
http://review.cyanogenmod.org/28322
http://review.cyanogenmod.org/28323
Just one build now for all GSM devices.
Ok.Downloaded ROM, following observed..My Tab - P1000
- During installation on cm10 latest, after wipe, no blue progress bar observed.
- Installed 12.12.2012 gapps
- On boot, cm animation on right side above center and slightly flattened...looks good.
- after 5 sec normal
- after boot receive error "Unfortunately, the process com.android.phone has stopped" which does not goes away.Removed sim and rebooted, error still persists.
Please suggest actions required.
Your efforts are appreciated :good:
Ok.
1) What build were you exactly running?
2) What gapps version did you have before.
3) What exactly did you wipe? (factory reset / data or system too)
4) Ignore the bootanimation for now.
5) Logs. (logcat, there are tons of ways to get one, just a search for "Howto: Logcat" will help you)
You said "- after boot receive error "Unfortunately, the process com.android.phone has stopped" which does not goes away.Removed sim and rebooted, error still persists."Answers to your query:
1) What build were you exactly running? - cm-10-20121221-NIGHTLY-p1
2) What gapps version did you have before. - gapps-jb-20121011-signed
3) What exactly did you wipe? (factory reset / data or system too) - Wipe cache and Dalvic
4) Ignore the bootanimation for now.
5) Logs. (logcat, there are tons of ways to get one, just a search for "Howto: Logcat" will help you - Unable to complete the boot, hence cannot access logs
You said "- after boot receive error "Unfortunately, the process com.android.phone has stopped" which does not goes away.Removed sim and rebooted, error still persists."
Anyways, as long as you can see the bootanimation, you should be able to get logs.
Also, try wiping data.
yes usb otg. also works with previous release.
i9100
XXLSJ NeatROM lite v4.0
mkdir ~/cm10.1-sgt7
cd ~/cm10.1-sgt7
repo init -u git://github.com/sgt7/android.git -b cm-10.1
repo sync
cd vendor/cm
./get-prebuilts
cd ../..
mkdir .repo/local_manifests
cp ~/yourdownloads/roomservice-twrp.xml .repo/local_manifests/roomservice.xml
<?xml version="1.0" encoding="UTF-8"?>
<manifest>
<project name="humberos/proprietary_vendor_samsung" path="vendor/samsung" remote="github" revision="cm-10.1" />
<project name="humberos/android_kernel_samsung_aries" path="kernel/samsung/aries" remote="github" revision="cm-10.1" />
<project name="humberos/android_device_samsung_p1" path="device/samsung/p1" remote="github" revision="twrp"/>
<project name="humberos/android_device_samsung_p1c" path="device/samsung/p1c" remote="github" revision="twrp"/>
<project name="humberos/android_device_samsung_p1-common" path="device/samsung/p1-common" remote="github" revision="twrp"/>
<remove-project name="CyanogenMod/android_bootable_recovery" />
<project name="humberos/Team-Win-Recovery-Project" path="bootable/recovery" remote="github" revision="cm-10.1" />
</manifest>
repo sync
source build/envsetup.sh
breakfast p1 # for p1, p1l and p1n
breakfast p1c # for p1c (CDMA)
time make -j3 bacon # j3 is number of cores
cd $cmdir/build; patch -p1 < $cmdir/../OpenPDroidPatches-4.2.x/openpdroid_4.2_build.patch > $cmdir/../pdroid.log
cd $cmdir/libcore; patch -p1 < $cmdir/../OpenPDroidPatches-4.2.x/openpdroid_4.2_libcore.patch >> $cmdir/../pdroid.log
cd $cmdir/packages/apps/Mms; patch -p1 < $cmdir/../OpenPDroidPatches-4.2.x/openpdroid_4.2_Mms.patch >> $cmdir/../pdroid.log
cd $cmdir/frameworks/base; patch -p1 < $cmdir/../OpenPDroidPatches-4.2.x/openpdroid_4.2_frameworks_base.patch >> $cmdir/../pdroid.log
cd $cmdir/frameworks/opt/telephony; patch -p1 < $cmdir/../OpenPDroidPatches-4.2.x/openpdroid_4.2_frameworks_opt_telephony.patch >> $cmdir/../pdroid.log
cd $cmdir