d2tmo/att/vzw-JB[024/025]kernel 4 Stock Based ROMs CPU/GPU OC+FauxSound![Aug-15]

Search This thread
By:
Advanced…
faux123

faux123

Senior Member
Dec 16, 2010
8,536
34,426
West Los Angeles
www.canonspike.com
Installation Instructions:

Here's a step by step instruction to install this kernel:

**************** ATT ****************
Change Log : http://faux.romhost.me/d2att/jb41/changelog.txt

The File ==> d2att TouchWiz kernel Mainline (OC'ed up to 1.62 GHz, should be 100% stable) <==

The File ==> d2att TouchWiz kernel Ultimate (OC'ed up to 1.84 GHz, should be stable with most phones) <==

**************** TMO ****************
Change Log : http://faux.romhost.me/d2tmo/jb41/changelog.txt

The File ==> d2tmo TouchWiz kernel Mainline (OC'ed up to 1.62 GHz, should be 100% stable) <==

The File ==> d2tmo TouchWiz kernel Ultimate (OC'ed up to 1.84 GHz, should be stable with most phones) <==

**************** VZW ****************
Change Log : http://faux.romhost.me/d2vzw/jb41/changelog.txt

The File ==> d2vzw TouchWiz kernel Mainline (OC'ed up to 1.62 GHz, should be 100% stable) <==

The File ==> d2vzw TouchWiz kernel Ultimate (OC'ed up to 1.84 GHz, should be stable with most phones) <==

1. download the above file (via phone directly or to a PC)
2. copy the downloaded zip file to /sdcard/download/
3. Open ROM Manager and select "Reboot into Recovery" and select "OK"
4. Once in recovery, select "wipe cache partition", select "Yes", then select "advanced", then select "Wipe Dalvik Cache", then select "Yes" again. Once finished, click the back button to go back to the main recovery menu. On that menu, select "Install Zip From SDCad", then select "Choose zip from SDCard", then go to /sdcard/download and select the downloaded zip file and let it run its script.
5. Once the script is done, select "reboot system now"

Note: After FLASHING, the first reboot may take longer than usual, please be patient... After the first reboot, it may lag during initial load (let everything finish loading). Once everything is loaded and phone is ready for use, reboot the phone a 2nd time and the lag will be gone and everything should be silky smooth...

[ Advanced Users: ]

[ Optional: ]

[ For Kernel Devlopers ONLY: ]



Please don't hesitate to talk among yourselves and help each other out... The RootzWiki community is what inspired me to hack kernels for everyone since everyone here is nice and helpful to each other... Keep helping each other.... Famous proverb: It's better to give than to receive...

Standard Disclaimer: Not responsible for bricking your phone, voiding your warranty, or any other pain or suffering you may feel as result of using this kernel!!!

My github Complying with GPL and RootzWiki rulez
biggrin.png


Follow me on :

If you find this Kernel useful, feel free to hit the [Thanks] button below
 
Last edited:
  • Like
Reactions: 47th_Ronin, julian_imeza, TehGoAT and 193 others
faux123

faux123

Senior Member
Dec 16, 2010
8,536
34,426
West Los Angeles
www.canonspike.com
FauxClock App recommended Settings"

CPU Control
  • Max clock - GHz 1.8 GHz for performance, 1.5 GHz for battery
  • Min clock - MHz 384 MHz for both
  • CPU Governor - Ondemand for performance, Intellidemand for battery
  • mpdecision - Off
  • Snake Charmer - OFF for performance, On for Battery
  • Eco Mode - Off for performance, On for battery
  • Set On Boot - On

SOC Control
  • Set On Boot - On
  • C0 - On
  • C1 - On

Voltage Control
  • Set On Boot -
  • Global CPU Voltage - Your preference

intellidemand gov control
  • Up Threshold - 75 for both
  • Boost Frequency - 0 for both
  • Two Phase Freq - 1350000 for both
  • Sampling Rate - 50000 for both
  • Optimal Freq - 1512000 for both
  • Synchro Freq - 702000 for both
  • Set On Boot - On

GPU Control
  • GPU Governor - ondemand for both
  • GPU Clock - 480Mhz for performance and 400Mhz for battery
  • GPU Vsync Toggle - On for both
  • Set On Boot - On for both

I/O Scheduler Control
  • I/O Scheduler (eMMC) - Deadline for both
  • Readhead Size (eMMC) - 512 for both
  • Set On Boot - On for both

Misc Control
  • Dynamic File Sync - On for both
  • TCP Congestion Control - Westwood for both

Vibration Control
  • Set On Boot - On for both
  • Vibration Control - Your own Preference

Above is what I use personally. MAY NOT be optimal for all :fingers-crossed:
 
Last edited:
  • Like
Reactions: SuperSmashedBro, marekg, jake2034 and 35 others
N

nst6563

Senior Member
Mar 15, 2011
130
20
Just flashed and seems decent. Quadrant score jumped to 5134 from 5021 on the stock kernel.

Now to see how the battery life is ;)
 
mbze430

mbze430

Senior Member
Feb 28, 2007
1,556
180
Southeast Missouri
I am testing out your kernel right now with System Tuner Pro. Your OP say there is voltage adjustment. But using v2.2.2 of System Tuner Pro I don't see a place to adjust voltage. Is it missing in the kernel or System Tuner Pro isn't picking it up from the kernel

This is on an AT&T SGS3
 
hiazn

hiazn

Senior Member
Jan 20, 2008
773
77
honolulu
mbze430 said:
I am testing out your kernel right now with System Tuner Pro. Your OP say there is voltage adjustment. But using v2.2.2 of System Tuner Pro I don't see a place to adjust voltage. Is it missing in the kernel or System Tuner Pro isn't picking it up from the kernel

This is on an AT&T SGS3
Click to expand...
Click to collapse

Actually if you read it correctly it doesn't actually say there is voltage adjustment.. only to use system tuner to do the adjustments.

Sent from my SGH-T999 using xda premium
 
hiazn

hiazn

Senior Member
Jan 20, 2008
773
77
honolulu
mbze430 said:
I don't know how/what to interpret that.
Click to expand...
Click to collapse

Laf. I know I guess . Its fauxs normal kernel first post and some of us have been with him for many a device so for me I do kinda take alot if it for granted. No UV just yet so you know. :D

1. He doesn't always update changelogs for every beta so don't expect it.

2. He's a pro., so your phone won't blow up.

3. if you check system tuner pro and that menu for UV doesn't show. Then it wasn't implemented yet. :)


Sent from my SGH-T999 using xda premium
 
Last edited:
E

EGBTMagus

Senior Member
Sep 21, 2010
202
32
Running 006 and everything it's smooth other then getting random gapps crashes. Don't know what's causing it.

Sent from my SGH-T999 using Tapatalk 2
 
hiazn

hiazn

Senior Member
Jan 20, 2008
773
77
honolulu
EGBTMagus said:
Running 006 and everything it's smooth other then getting random gapps crashes. Don't know what's causing it.

Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse

Try fixing permissions. Did you clear all caches? I haven't had a fc w b6.

Is it Google.gapps that is fc'ing? Turn off sync internet I heard that is causing issues.

Sent from my SGH-T999 using xda premium
 
dyno0919

dyno0919

Senior Member
Mar 3, 2012
113
24
Installed and it seems pretty smooth. I had some issues with laggy chrome in v005, but that seems to be gone with this one. Quadrant score is a tad higher on average as well. Slight homescreen lag, but I run a live wallpaper with a bunch of transparent widgets which have never transitioned smoothly, so can't blame it.

Well done Faux! I loved using your kernels on my old Atrix 4G before it took a dump and I'm loving them now. Keep up the good work! It's good to have you around.
 
Last edited:
You must log in or register to reply here.

Similar threads

djintrigue808
  • Locked
[ROM][UVDLJA][4.1.1]~Frosty Jellybean v11.6~[Xone Kernel][02.01.2013]
Replies
10K
Views
1M
oka1
oka1
itsmikeramsay
  • Locked
[ROM][4.2.2][OFFICIAL] LiquidSmooth v2.5 - d2tmo - 5|27|13
Replies
6K
Views
761K
jayharper08
jayharper08
Papa Smurf151
  • Locked
[ROM][OFFICIAL][Marshmallow 6.0][D2TMO] PAC-ROM
Replies
3K
Views
502K
LenAsh
LenAsh
cyanogen
[ROM][OFFICIAL] CyanogenMod 10 Nightly Builds for SGH-T999
Replies
14K
Views
2M
V
vanclaver
anterus
[Kernel][JB] Leankernel: Minimalistic Kernel for D2TMO/D2ATT (AOSP) v2.9 [3/09/13]
Replies
1K
Views
248K
TheLastSidekick
TheLastSidekick

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 196
    faux123
    faux123
    Installation Instructions:

    Here's a step by step instruction to install this kernel:

    **************** ATT ****************
    Change Log : http://faux.romhost.me/d2att/jb41/changelog.txt

    The File ==> d2att TouchWiz kernel Mainline (OC'ed up to 1.62 GHz, should be 100% stable) <==

    The File ==> d2att TouchWiz kernel Ultimate (OC'ed up to 1.84 GHz, should be stable with most phones) <==

    **************** TMO ****************
    Change Log : http://faux.romhost.me/d2tmo/jb41/changelog.txt

    The File ==> d2tmo TouchWiz kernel Mainline (OC'ed up to 1.62 GHz, should be 100% stable) <==

    The File ==> d2tmo TouchWiz kernel Ultimate (OC'ed up to 1.84 GHz, should be stable with most phones) <==

    **************** VZW ****************
    Change Log : http://faux.romhost.me/d2vzw/jb41/changelog.txt

    The File ==> d2vzw TouchWiz kernel Mainline (OC'ed up to 1.62 GHz, should be 100% stable) <==

    The File ==> d2vzw TouchWiz kernel Ultimate (OC'ed up to 1.84 GHz, should be stable with most phones) <==

    1. download the above file (via phone directly or to a PC)
    2. copy the downloaded zip file to /sdcard/download/
    3. Open ROM Manager and select "Reboot into Recovery" and select "OK"
    4. Once in recovery, select "wipe cache partition", select "Yes", then select "advanced", then select "Wipe Dalvik Cache", then select "Yes" again. Once finished, click the back button to go back to the main recovery menu. On that menu, select "Install Zip From SDCad", then select "Choose zip from SDCard", then go to /sdcard/download and select the downloaded zip file and let it run its script.
    5. Once the script is done, select "reboot system now"

    Note: After FLASHING, the first reboot may take longer than usual, please be patient... After the first reboot, it may lag during initial load (let everything finish loading). Once everything is loaded and phone is ready for use, reboot the phone a 2nd time and the lag will be gone and everything should be silky smooth...

    [ Advanced Users: ]

    [ Optional: ]

    [ For Kernel Devlopers ONLY: ]



    Please don't hesitate to talk among yourselves and help each other out... The RootzWiki community is what inspired me to hack kernels for everyone since everyone here is nice and helpful to each other... Keep helping each other.... Famous proverb: It's better to give than to receive...

    Standard Disclaimer: Not responsible for bricking your phone, voiding your warranty, or any other pain or suffering you may feel as result of using this kernel!!!

    My github Complying with GPL and RootzWiki rulez
    biggrin.png


    Follow me on :

    If you find this Kernel useful, feel free to hit the [Thanks] button below
    View
    38
    faux123
    faux123
    FauxClock App recommended Settings"

    CPU Control
    • Max clock - GHz 1.8 GHz for performance, 1.5 GHz for battery
    • Min clock - MHz 384 MHz for both
    • CPU Governor - Ondemand for performance, Intellidemand for battery
    • mpdecision - Off
    • Snake Charmer - OFF for performance, On for Battery
    • Eco Mode - Off for performance, On for battery
    • Set On Boot - On

    SOC Control
    • Set On Boot - On
    • C0 - On
    • C1 - On

    Voltage Control
    • Set On Boot -
    • Global CPU Voltage - Your preference

    intellidemand gov control
    • Up Threshold - 75 for both
    • Boost Frequency - 0 for both
    • Two Phase Freq - 1350000 for both
    • Sampling Rate - 50000 for both
    • Optimal Freq - 1512000 for both
    • Synchro Freq - 702000 for both
    • Set On Boot - On

    GPU Control
    • GPU Governor - ondemand for both
    • GPU Clock - 480Mhz for performance and 400Mhz for battery
    • GPU Vsync Toggle - On for both
    • Set On Boot - On for both

    I/O Scheduler Control
    • I/O Scheduler (eMMC) - Deadline for both
    • Readhead Size (eMMC) - 512 for both
    • Set On Boot - On for both

    Misc Control
    • Dynamic File Sync - On for both
    • TCP Congestion Control - Westwood for both

    Vibration Control
    • Set On Boot - On for both
    • Vibration Control - Your own Preference

    Above is what I use personally. MAY NOT be optimal for all :fingers-crossed:
    View
    16
    faux123
    faux123
    Rserved 2
    View
    16
    faux123
    faux123
    Return of the Mack ;) OP is updated.. TouchWiz kernel redux is OUT!
    View
    13
    faux123
    faux123
    Kernel 015 is official! OP updated.

    Change Log:

    Incorporated some minor fixes from VZW GS3's source dump from Samsung!
    View

New posts