Just reboot, if necessary. You shouldn't really notice any differences at all. But your phone will.
Would that be the same for a UK t-Mobile User? Unfortunately I have applied the Hard spl already so does this mean that if I flash teh htc rom onto it I will be stuck with the HTC rom and cant go back to the T-Mobile one ? ( lol if i ever learn how to make a backup of it )Just a little FYI for Tilt users. When you install Hard-SPL and flash to the HTC ROM, you can't reflash the ATT ROM at the moment. So, be sure you know this going in, just in case you need to reflash the original for warranty/return issues.
( ERROR [244] : INVALID MODEL ID )
Just a little FYI for Tilt users. When you install Hard-SPL and flash to the HTC ROM, you can't reflash the ATT ROM at the moment. So, be sure you know this going in, just in case you need to reflash the original for warranty/return issues.
( ERROR [244] : INVALID MODEL ID )
How would you do this and what is the NBH?not true; just change the model ID in the NBH to match your device
How would you do this and what is the NBH?
Soz for the noob question but I am one at the mo
not true; just change the model ID in the NBH to match your device
*****************************************************************************
XDA-Developers HTC KAISER CID Unlocker by pof
HTC TyTN II P4550 / T-Mobile MDA Vario III / AT&T Tilt (8900, 8915, 8925)
Swisscom XPA 1605 / Vodafone v1615 / Vodafone VPA Compact V / SFR v1615
Features:
1. SuperCID / Security Level=0 2. Does not check NBH signatures
3. Model ID check only 4 bytes 4. Based on MFG bootloader, rtask enabled
5. Accept any password 6. SPL overwrite disabled
This software is free to use but at your own risk, I take no responsiblity
for any conflict, fault, or damage caused by this unlocking procedure.
No warranties of any kind are given, any commercial use is prohibited.
Your donation is a strong incentive to continue research on new devices,
if you find my work useful please cosider making a PayPal donation to:
pau@eslack.org
Any donation amount is greatly appreciated :-)
*****************************************************************************
Please make sure ActiveSync is enabled (GREEN icon in systray)
and hit ENTER to start...
Kaiser JumpSPL is running on your device, please check your device
screen and follow the steps until you see the tri-color screen.
When done hit ENTER to continue...
Device screen should be now TRI-COLOR and show "USB"
===> PLEASE UNPLUG AND RE-PLUG THE USB CABLE NOW <===
===> PLEASE UNPLUG AND RE-PLUG THE USB CABLE NOW <===
===> PLEASE UNPLUG AND RE-PLUG THE USB CABLE NOW <===
ActiveSync icon should become gray after that.
When done hit ENTER to continue...
Phone screen should now be tri-color and the activesync icon gray
if not, the loading process has failed and you'll have to repeat it again.
If all was OK hit ENTER and the standard "PDA Phone ROM Update Utility"
window will start, allowing you to flash HardSPL on your device.
Hit CTRL+C to Cancel or ENTER to continue...
Follow the steps on the wizard to flash HardSPL, when finished your
device will reboot. It should last no more than 1 minute.
- Launching RUU, please wait...
Process is finished, congratulations!
If you find it useful don't forget to donate :)
*****************************************************************************
(c)2007 pof - XDA Developers
Hit ENTER to quit.