[STOCK ROM] Odin3 One-Click Downloader and Drivers CAPTIVATE ONLY

Search This thread
By:
Advanced…
S

sejin

Senior Member
Jul 7, 2008
105
0
no i'm still the computer issues. just asking what messages he got after file analysis for that thing to go
 
designgears

designgears

Inactive Recognized Developer
Feb 9, 2010
5,399
8,909
SLC
Is this what you guys are seeing too?

2e1ujh2.jpg
 
Last edited:
_Opiate_

_Opiate_

Senior Member
Jun 1, 2010
473
12
You can pull the battery and boot back into Android after you see that screen right?
 
_Opiate_

_Opiate_

Senior Member
Jun 1, 2010
473
12
HOLT SH@T What about booting into recovery?


Sent from my HTC Liberty using XDA App
 
_Opiate_

_Opiate_

Senior Member
Jun 1, 2010
473
12
Oh wow i was going to give it a shot but not anymore.

Sent from my HTC Liberty using XDA App
 
mcvert

mcvert

Member
Jul 20, 2010
23
9
Stanford, CA
my computer is running win7 64-bit

in that picture I noticed that the usb is still in. make sure to unplug that otherwise you won't be able to get into download mode.

Sent from my SAMSUNG-SGH-I897 using XDA App
 
evil5826

evil5826

Senior Member
Jul 22, 2010
59
1
From what i just tried, you have to have odin running
Usb plugged in
Power off the device
Hold both volume keys and then press power while holding the power keys.
It then went into download mode for me.

Im running windows 7 64bit
 
C

clubtech

Senior Member
Jun 26, 2007
1,908
353
USA
When you guys started the process, did you click "Master Clear" before you clicked "Start"? Is it needed for the process?
I know that in the classic Odin, you had to select "repartition" when flashing otherwise it would get stuck on "flile analysis" or something like that. Maybe this master clear is actually repartition?
 
D

DailyApper

Member
Jul 18, 2010
28
1
I got mine replaced. Simply said I was syncing it and the cable got accidentally pulled out. They were dumb founded and had never seen that before. And gave me a new one.

I also had the phone / computer screen and couldn't get out of it.

Sent from my SAMSUNG-SGH-I897 using XDA App
 
C

clubtech

Senior Member
Jun 26, 2007
1,908
353
USA
So who completed this successfully?
Just one guy from the entire thread ?

Those who did flashed with no issue please state your exact steps and the windows OS you are running.

Sent from my SAMSUNG-SGH-I897 using XDA App
 
You must log in or register to reply here.

Similar threads

designgears
  • Locked
[ROM]Cognition v2.3b8
Replies
13K
Views
2M
LMSarmiento
LMSarmiento
atinm
[NIGHTLY][ROM] CyanogenMod 7 for Samsung Captivate (captivatemtd)
Replies
13K
Views
3M
ajeesh vijayan
ajeesh vijayan
AdamOutler
[RELEASE] One-Click UnBrick updated 10july11
Replies
383
Views
962K
I
iCrazyGaming
designgears
[ROM][2.2] »» Cognition 4.5.3 «« | The Original Captivate Rom
Replies
7K
Views
1M
Avikar
Avikar
atinm
[ROM][ICS][IML74K] teamhacksung's CM9 ALPHA for Captivate (BUILD 17)
Replies
7K
Views
2M
RootTheMachine
RootTheMachine

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 82
    designgears
    designgears
    WARNING: "MASTER CLEAR" WILL WIPE YOUR BUILT-IN STORAGE!
    I am not responsible for any damage caused to your device.

    What is this?:
    If you see the "phone+!+computer" screen, you need this! If you deleted something you shouldn't have and can't get it back on your phone, this is probably your best bet. This is the Odin3 One-Click Downloader for restoring your phone from a completely software bricked state, or for whatever purpose you see fit to use it for. You don't have to change any settings, it is all pre-packaged and ready to go.

    If this has helped you out, please consider buying me a beer!


    How to use:

    1. Download and install the correct drivers below (mac and linux don't need drivers)
    2. Plug in your usb cable to your phone and computer
    3. Open Odin
    4. Enter Download Mode (see below)
    5. Click Start
    6. Be Patient, the first boot will take a while

    How to use Master Clear:

    1. Boot your phone up normally with usb debugging on
    2. Click Master Clear


    How to enter download mode:
    Method 1:(ADB - from recovery or normally booted with usb debugging on)
    1. Open a cmd prompt/console/shell
    2. adb shell
    3. adb reboot download
    Method 2:(KEY COMBO)
    • Remove the battery, sim card, sdcard if you have one
    • Insert the battery
    • Hold Volume Up + Volume Down + Power
    Method 3:(KEY COMBO)
    • Remove the battery, sim card, sdcard if you have one
    • Insert the battery
    • Hold both Volume buttons (from i9000 just down, don't touch the power button)
    • Plug in the USB cable and continue holding both Volume buttons

    Drivers:
    Windows 64bit
    Windows 32bit

    I897UCJF6 - Odin3 One-Click Downloader:
    http://www.mediafire.com/?0w2y31maz8mdom4
    http://www.multiupload.com/XAZUYNXSC1



    The internal beta's are NOT one-click, please read the linked threads
    UPDATE: I897UCJH2 (Internal BETA)
    You can get it here

    UPDATE: I897UCJH3 (Internal BETA)
    You can get it here
    View
    6
    Ethere
    Ethere
    I uploaded this on my Fileserve account if anyone needs a working link:

    http://www.fileserve.com/file/emnCn2j
    View
    5
    mcvert
    mcvert
    Croak said:
    Did it stay on "File analysis" for a long time?
    Click to expand...
    Click to collapse

    if you're getting that, quit and unplug the phone, take out the battery so it's completely dead (and take out the sim card while you're at it)

    then put back just the battery and put the phone into download mode (volume down + power)

    then run odin and THEN plug in the phone. you have to do it in the right order otherwise it gets stuck on file analysis. go figure.
    View
    4
    modmyphone
    modmyphone
    opcow said:
    Right-clicked the app and chose "Run as administrator"? I can't think of anything else other than to try CP3P0LOL's odin 2.1 package, which is safer anyway, because it includes the 3 button combo fix.
    Click to expand...
    Click to collapse

    Tried the administrator route... no go. I'll give the other way a shot tomorrow since I've got an early start to the day.

    Thanks!
    View
    4
    studacris
    studacris
    cwgannon said:
    Your phone is likely not bricked. Get or create a jig to get your phone into download mode.

    The rest is easy: running the Odin package in this thread, rooting your phone, and installing CWM are all the steps you need to install CyanogenMod.

    The root files and CWM files are attached for when you reach that point. Each should be renamed to update.zip and placed in the SD card root directory of your phone. Reboot into recovery (easiest is via adb reboot recovery but that requires a fair amount of configuration to get working) and select the reinstall packages option both times; root first, then CWM.
    Click to expand...
    Click to collapse


    You don't need to root first, just use the cwm zip then flash whatever Rom you want, the Rom will be rooted, rooting before installing cwm to simply flash a Rom is like wiping before you poop
    View

New posts