FORUMS
Remove All Ads from XDA

Ubuntu Touch 13.10 Saucy on the HP Touchpad DUAL BOOT ANDROID

381 posts
Thanks Meter: 486
 
Post Reply Email Thread
1st December 2015, 07:27 AM |#441  
OP Senior Member
NRH, TX.
Thanks Meter: 486
 
More
For a dude:

PS. Looks like the links for Ubuntu Touch 13 is broken???? I do wish Ubuntu didn't remove CM11 as a source... that prevents us from using Ubuntu Touch unless this dude finished his project. Or if libhybris was maybe manually compiled and etc... Doing SFOS 2.0 right now with a 3.0 kernel.


cd /tmp
echo "Thanks to crimsonredmk"
echo "Repartition to create ext3 volume for Ubuntu."
pkill -SIGUSR1 cryptofs
pkill -SIGUSR1 LunaSysMgr
pkill -SIGUSR1 LunaDownloadMgr
pkill -SIGUSR1 cryptofs
pkill -SIGUSR1 tar
pkill -SIGUSR1 cryptofs
pkill -SIGUSR1 LunaSysMgr
pkill -SIGUSR1 LunaDownloadMgr
pkill -SIGUSR1 cryptofs
pkill -SIGUSR1 tar
umount /media/internal
echo "Did the previous line say something about not being able to umount /media/internal? If so, press 1, otherwise press 0."
echo "DO NOT PRESS 0 IF IT DID SAY SOMETHING; THIS CAN LEAD TO DATA LOSS! If it did say something, reboot and try again."
read PROBLEM
if [ $PROBLEM == 1 ];
then echo "Goodbye."
exit
else echo "Ok, continuing."
fi
PARTITION1=300
PARTITION1SHRINK=310
PARTITION2=1500
PARTITION2SHRINK=1550
PARTITION3=200
PARTITION3SHRINK=210
echo "Your chosen partition is ${PARTITION1}MB."
CURRENTSIZE=$(lvm.static lvdisplay -c store/media | awk -F: '{print $7/2048}')
echo "Your current media partition is ${CURRENTSIZE}MB."
NEWSIZE=$(($CURRENTSIZE - $PARTITION1))
echo "Your new partition layout will include a ${PARTITION1}MB ext3 lvm partition (ut-system) and a ${NEWSIZE}MB media partition."
echo "Does this seem correct? If so, type 1, if not, type 0."
read OK
if [ $OK == 1 ];
then echo "Ok, continuing."
else echo "Goodbye."
exit
fi
echo "Now resizing your media partition and creating the ut-system partition for UbuntuTouch."
resizefat /dev/store/media ${NEWSIZE}M
lvresize -L -${PARTITION1SHRINK}M /dev/store/media
lvcreate -L ${PARTITION1}M -n ut-system store
echo "Your chosen partition is ${PARTITION2}MB."
CURRENTSIZE=$(lvm.static lvdisplay -c store/media | awk -F: '{print $7/2048}')
echo "Your current media partition is ${CURRENTSIZE}MB."
NEWSIZE=$(($CURRENTSIZE - $PARTITION2))
echo "Your new partition layout will include a ${PARTITION2}MB ext3 lvm partition (ut-data) and a ${NEWSIZE}MB media partition."
echo "Does this seem correct? If so, type 1, if not, type 0."
read OK
if [ $OK == 1 ];
then echo "Ok, continuing."
else echo "Goodbye."
exit
fi
echo "Now resizing your media partition and creating the ut-data partition for UbuntuTouch."
resizefat /dev/store/media ${NEWSIZE}M
lvresize -L -${PARTITION2SHRINK}M /dev/store/media
lvcreate -L ${PARTITION2}M -n ut-data store
echo "Your chosen partition is ${PARTITION3}MB."
CURRENTSIZE=$(lvm.static lvdisplay -c store/media | awk -F: '{print $7/2048}')
echo "Your current media partition is ${CURRENTSIZE}MB."
NEWSIZE=$(($CURRENTSIZE - $PARTITION3))
echo "Your new partition layout will include a ${PARTITION3}MB ext3 lvm partition (ut-cache) and a ${NEWSIZE}MB media partition."
echo "Does this seem correct? If so, type 1, if not, type 0."
read OK
if [ $OK == 1 ];
then echo "Ok, continuing."
else echo "Goodbye."
exit
fi
echo "Now resizing your media partition and creating the ut-cache partition for UbuntuTouch."
resizefat /dev/store/media ${NEWSIZE}M
lvresize -L -${PARTITION3SHRINK}M /dev/store/media
lvcreate -L ${PARTITION3}M -n ut-cache store
sync
mkfs.ext4 /dev/store/ut-data
mkfs.ext3 /dev/store/ut-system
mkfs.ext3 /dev/store/ut-cache
lvresize -l +100%FREE /dev/mapper/store-media

Might want to change the last 2 to ext4.. oops
 
 
19th December 2015, 04:36 PM |#442  
aryan01's Avatar
Senior Member
Flag Hyderabad
Thanks Meter: 83
 
More
any update dev? thanks for da hardwork till now..
5th January 2016, 09:43 PM |#443  
Member
Thanks Meter: 18
 
Donate to Me
More
hello and appy new year. can anyone repost the links if available? thanks
27th March 2016, 11:20 PM |#444  
tedrogers61's Avatar
Senior Member
Thanks Meter: 85
 
More
Hi,

I'm really very interested in installing this...trouble is I just binned off WebOS for good...do I really need it for sound?

Thanks.
16th June 2016, 03:46 AM |#445  
Junior Member
Flag Frisco
Thanks Meter: 4
 
More
can some one give me the links because those links are outdated
16th June 2016, 04:38 AM |#446  
OP Senior Member
NRH, TX.
Thanks Meter: 486
 
More
Oh.. the FBI took all my touchpads. I got raided. I was working on... What was I working on.. Oh Lollipop and the camera which I got working.. then I was gonna try marshmallow.. but I was going to also see if sailfish would work and or I was going to try this CAF Ubuntu Touch Project.. but.. the FBI took all 3 of my touchpads.

I still have the links up somewhere.. So old though.. 13.04... But it does work. Lemme know and I will update the link.
7th January 2017, 03:55 PM |#447  
Senior Member
Thanks Meter: 23
 
More
Anybody got working links for this stuff? Wanna play around with it. Thanks!
28th November 2017, 12:59 AM |#448  
Senior Member
Thanks Meter: 211
 
More
Hi Guys, if anyone is left??

Does this work on a DM setup Touchpad??
Whats the procedure? Install CM10 first to install Linux, and then Android 7.1
Or,
Install Android 7.1, then attempt to install Linux?

Also, does anyone have UbuntuTouch_Uninstaller ?

Thanks, Lister
28th November 2017, 01:27 PM |#449  
Senior Member
Thanks Meter: 23
 
More
Quote:
Originally Posted by Lister Of Smeg

Hi Guys, if anyone is left??

Does this work on a DM setup Touchpad??
Whats the procedure? Install CM10 first to install Linux, and then Android 7.1
Or,
Install Android 7.1, then attempt to install Linux?

Also, does anyone have UbuntuTouch_Uninstaller ?

Thanks, Lister

Yeah I'd love to get the files too.
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes