[TOOL] PERMANENT-ROOT (Fixed Links!) & Temp-Root (v2) for any MT4GS (Windows)

Search This thread

jorhett

Member
Dec 9, 2009
30
1
San Jose
Communications with the phone interrupted

The temp root is working fine now. But every time I try and use revolutionary, it installs everything, reboots to fastboot, says it's going to reboot to fastboot again but then immediately comes back with "Communications with the phone interrupted" complaint and bails. (the phone stays in the first fastboot)
 

Litesorrows

Senior Member
May 19, 2011
264
26
Elgin
www.facebook.com
I had issues after getting S-Off
1) No fastboot
2) Didn't install CWR
So I couldn't get CWR(Official) on it. But I found a Simple work around.

Once you have S-Off, Temp root again.
Download CWR from the Market.
Open it
Then select "Flash recovery"
Reboot into recovery
Backup your Stock Rom
Then flash the newest superuser to give you root.
Enjoy!
 

jorhett

Member
Dec 9, 2009
30
1
San Jose
I had issues after getting S-Off
1) No fastboot
2) Didn't install CWR
So I couldn't get CWR(Official) on it. But I found a Simple work around.

Once you have S-Off, Temp root again.
Download CWR from the Market.
Open it
Then select "Flash recovery"
Reboot into recovery
Backup your Stock Rom
Then flash the newest superuser to give you root.
Enjoy!

When you said "no fastboot" did you mean you had the same symptoms as me above, where it wouldn't do the second reboot into fast boot?

When you say CWR do you mean the ROM Manager?
 

tomygunner

Senior Member
Mar 21, 2008
107
9
Berlin
Problems on installing the Temp Root.
ADB and Drivers worked fine, but when executing
the .bat file i get follwing:

Many of them ...


An error occurred while running the exploit (-1) (errno: 22)
An error occurred while running the exploit (-1) (errno: 22)
An error occurred while running the exploit (-1) (errno: 22)
An error occurred while running the exploit (-1) (errno: 22)
An error occurred while running the exploit (-1) (errno: 22)

C:\android-sdk\TempRoot>adb wait-for-device

C:\android-sdk\TempRoot>adb remount
remount failed: Operation not permitted

C:\android-sdk\TempRoot>adb shell mount -o rw,remount rootfs /
mount: Operation not permitted

C:\android-sdk\TempRoot>adb shell mount -oremount,suid /dev/block/mmcblk0p23 /da
ta
mount: Operation not permitted

C:\android-sdk\TempRoot>adb shell mkdir /vendor/bin
mkdir failed for /vendor/bin, Read-only file system

C:\android-sdk\TempRoot>adb shell chown root.shell /vendor/bin
Unable to chmod /vendor/bin: No such file or directory

C:\android-sdk\TempRoot>adb shell chmod 755 /vendor/bin
Unable to chmod /vendor/bin: No such file or directory

C:\android-sdk\TempRoot>adb push ./sqlite3 /vendor/bin
failed to copy './sqlite3' to '/vendor/bin': Read-only file system

C:\android-sdk\TempRoot>adb push ./su /vendor/bin
failed to copy './su' to '/vendor/bin': Read-only file system

C:\android-sdk\TempRoot>adb push ./busybox /vendor/bin
failed to copy './busybox' to '/vendor/bin': Read-only file system

C:\android-sdk\TempRoot>adb shell chown root.shell /vendor/bin/su
Unable to chmod /vendor/bin/su: No such file or directory

C:\android-sdk\TempRoot>adb shell chown root.shell /vendor/bin/busybox
Unable to chmod /vendor/bin/busybox: No such file or directory

C:\android-sdk\TempRoot>adb shell chown root.shell /vendor/bin/sqlite3
Unable to chmod /vendor/bin/sqlite3: No such file or directory

C:\android-sdk\TempRoot>adb shell chmod 6555 /vendor/bin/su
Unable to chmod /vendor/bin/su: No such file or directory

C:\android-sdk\TempRoot>adb shell chmod 4555 /vendor/bin/busybox
Unable to chmod /vendor/bin/busybox: No such file or directory

C:\android-sdk\TempRoot>adb shell chmod 755 /vendor/bin/sqlite3
Unable to chmod /vendor/bin/sqlite3: No such file or directory

C:\android-sdk\TempRoot>adb shell busybox --install -s /vendor/bin
busybox: permission denied

C:\android-sdk\TempRoot>adb shell sync

C:\android-sdk\TempRoot>adb shell chmod 6555 /vendor/bin
Unable to chmod /vendor/bin: No such file or directory

C:\android-sdk\TempRoot>adb install ./Superuser.apk
1755 KB/s (196640 bytes in 0.109s)
pkg: /data/local/tmp/Superuser.apk
Success

C:\android-sdk\TempRoot>pause

Is my phone completely blocked? I would like to get rid of the HTC Locations, by the temp root.
 

Stryder5

Senior Member
Mar 2, 2009
3,352
1,144
Texas
Problems on installing the Temp Root.
ADB and Drivers worked fine, but when executing
the .bat file i get follwing:

Many of them ...


An error occurred while running the exploit (-1) (errno: 22)
An error occurred while running the exploit (-1) (errno: 22)
An error occurred while running the exploit (-1) (errno: 22)
An error occurred while running the exploit (-1) (errno: 22)
An error occurred while running the exploit (-1) (errno: 22)

Is my phone completely blocked? I would like to get rid of the HTC Locations, by the temp root.

Per OP:

"You'll get errors like "An error occurred while running the exploit (-1) (errno: 14)", but if it also says "Exploiting device" afterwards, then it was successful!"

Btw, temp root will allow you to delete it, but I *think* it will come back after reboot until you get S-Off.
 

steve_77

Senior Member
Jun 9, 2010
130
9
su-2.3.6.3-efgh-signed.zip vs su-3.0.7-efgh-signed.zip ???

Ok i know we are supposed to install su-2.3.6.3-efgh-signed.zip to get root


but according to http://androidsu.com/superuser/
the latest SU version is 3.0.7 (instead of 2.3.6.3)

is there any problem with installing the newer version (3.0.7) ?
 

651stp

Senior Member
Feb 21, 2008
1,300
17
Minneapolis
okay, i dled htc sync and it cant find my device... Says no device connected. I understand the rest but that. LOL. why wont it find my phone to install drivers ughhhh
 

Litesorrows

Senior Member
May 19, 2011
264
26
Elgin
www.facebook.com
Ok i know we are supposed to install su-2.3.6.3-efgh-signed.zip to get root


but according to http://androidsu.com/superuser/
the latest SU version is 3.0.7 (instead of 2.3.6.3)

is there any problem with installing the newer version (3.0.7) ?

No, just at the time it was written. That was the current SU. It will update once its flashed.

Sent from my RubiX CubeD NonSense MT4GS using xda premium
 

Litesorrows

Senior Member
May 19, 2011
264
26
Elgin
www.facebook.com
okay, i dled htc sync and it cant find my device... Says no device connected. I understand the rest but that. LOL. why wont it find my phone to install drivers ughhhh

Ok, so what I did is (Mounted Phone) removed or killed all my Software running. Programs that use the SD Card when the phones mounted need to be killed. Droid Explorer, Kodak Easy Share, HP Photosmart. Programs like that. Droid Explorer is the biggest issue they don't talk about. It makes a ADB connection to the phone, won't let REV work. Once your programs are killed. Disable all AntiVirus, Firewalls, etc. they stop the program from running. Right Click on the HTC Sync and quit it. Once that's good. And you followed the The instruictions to get ADB, and The HTC Drivers along side Rev working. Do this :D Run Freevo from your PC. Give it a second. don't be afraid to wait. But it shouldn't take longer than a Minute or 3. Once your Temp rooted, run Rev to get S-Off. You'll get some common errors. But once it gets to the running exploit section, that's where the most common issues are. If you killed all your Programs that use the Phones SD, the Running exploit shouldn't take longer than 5 Minutes on a Midrange Duel Core computer. But if the running exploit hangs on the "Running Exploit" for more than 10 minutes. Its most likely it messed up. Just repeat this post untill it works. Once you have S-Off. Don't flash the Version of CWM they offer. Just reboot. Once you reboot, Temp Root again. Install CWM (ClockworkMod) from the market. Open Up the app once installed. Flash recovery( the 1st or Second option). Then Reboot into Recovery. Now your S-Off, custom Recovery. No Root. Just flash the SU Zip from OP, or use Gingerbreak. Hope this helps.

Sent from my RubiX CubeD NonSense MT4GS using xda premium
 

theansible

Senior Member
Oct 12, 2009
81
8
Revolutionary not working..

I'm soooo frustrated. When I run Revolutionary, I receive this error message:

Your device: doubleshot, with HBOOT 1.45.0013 is not supported at this time.

I read this note on the "Read this before posting. MT4G Slide Compendium" thread:
Note as of 12/22/2011 the ota update is not rootable (H boot 1.45.0013) and s-off cannot be obtained.

So this means (currently) my device is completely un-rootable, correct?

According to this thread, we're still waiting for a tool to get around this?
http://xdaforums.com/showthread.php?t=1421258

Is this true? We're still waiting for someone to figure this out? Oh nooo.. I just got this device cuz I saw so many people already rooted theirs. I didn't see this coming! :confused:

Oh well, Tmobile gives a 20 day "buyer's remorse period". I guess I'll wait a couple weeks for the tool to emerge. If not, I'll send it back.
 
Last edited:

theansible

Senior Member
Oct 12, 2009
81
8
Rooted now but can't flash any roms!

Even though I've successfully rooted this device, I am still unable to flash any ROMS because I can not obtain S-OFF.. I think?

For example I tried installing the ROM from this thread:
http://xdaforums.com/showthread.php?t=1329100

I select the .zip file in Rom Manager and it reboots, opens and installs the update package from the .zip file. It says it has successfully installed, then reboots and just hangs at the MyTouch logo screen forever. I assume this is because I don't have S-OFF... Is that right?

Is there any way around this? I'm just trying to install a custom or debloated ROM.

Thanks for any help or insight.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 43
    As far as I can tell, these are the only detailed instructions here for obtaining Permanent Root (and S-OFF). Hit THANKS if you feel inclined...

    Just to be clear, this is not my basework, but I've assembled all the pieces and instructions to make it work for the MT4GS! Thanks to revolutionary, modaco, teamWin, eugene373, idanfima, coolbho3000 and wisefire for the easyfrevo part!

    Temp Root:
    You must have the USB drivers installed for your MT4GS. (If you don't have them, you can always install HTC Sync for the Sensation, plug in your MT4GS, and it will install the correct drivers.)

    You MUST exit from the HTC Sync application for this to work!! (Right-click on the icon in the taskbar, and select Exit)

    You must also have USB Debugging enabled. (Settings, Applications, Development, USB debugging)

    Click-For-perma-temp-v2.zip
    As of this update (23 Feb 2012), this has the latest SuperUser.apk...

    Unzip, and run the batch file (Run_ME_Fr3vo_ROOT.bat)...
    You'll get errors like "An error occurred while running the exploit (-1) (errno: 14)", but if it also says "Exploiting device" afterwards, then it was successful!

    This is temp-root, meaning that you can run apps that require root, but it'll go away when you reboot. Run the script again to get root back.

    Permanent Root: (thanks to ikhzter for helping with some of the instructions!)
    NOTE: If you don't have ADB working (or don't know what ADB is), please download the drivers and files for the temp-root above, and be sure to save the revolutionary.exe into the same directory as the temp-root solution. Make sure you have HTC fastboot drivers as well (if you don't already), which are on the Revolutionary page.

    Or use the tools provided here: Click-For-ADB-Windows.zip
    (Zip contains ADB.EXE FASTBOOT.EXE ...)

    Thank you Team Revolutionary! If you would like to be one of the first to get PERMANENT root access, then download the new Revolutionary, instructions here:

    http://unrevoked.com/rootwiki/doku.php/public/revolutionary
    Revolutionary version 0.4pre3 or later will work with your MT4GS, but it's still a developer preview... Don't come yelling if you mess up your phone. (But do share your results, so we can collectively solve any issues!)
    You'll need your serial number (Settings, About, Phone Identity), HBOOT version (only 1.44.0007 is supported now, but you can check your HBOOT by: Settings, Power, uncheck "Fast Boot", then power off, hold down volume down as you power on, the HBOOT version is at the top of the screen). Be sure to write down your Beta Key! (Or copy it to your clipboard so you can paste it into your command prompt.)

    Note: you can also enter bootloader by issuing the command "adb reboot-bootloader" if you have the ADB & drivers installed (follow the Temp Root instructions above for drivers and ADB).

    YOU MAY NEED TO DISABLE YOUR ANTIVIRUS PROGRAM- Norton is flagging up Revolutionary as a Virus when it isn't.

    1. With the phone switched on (not in HBOOT, just the regular home screen), run the revolutionary Utility you just downloaded from http://revolutionary.io/ and if it has found your device it should read
      "Found your device: myTouch_4G_Slide..." (If it doesn't, see DEBUGGING, below)
    2. Once you have entered your beta key correctly, follow any on screen prompts or actions from revolutionary and wait for it to S-Off,
    3. You're done. Your Device will Successfully have S-OFF.... If you have S-off, your hboot will now be 1.44.1107
    4. Revolutionary will now ask you to Install clockwork recovery mod after S OFF. While you may choose to let Revolutionary do it for you (easiest, but it installs an older version with some USB charging issues), you can always do it manually, which I show below.

    Hit THANKS!

    You now have S-OFF on your MT4GS! Woo hoo!

    Next, we'll flash the latest ClockWork Recovery (v4.0.0.9 without the charging problem) if you didn't do it above: (Thanks to Paul O'Brien / Modaco!!)
    • Download the ClockworkMod image file from here or here (direct mirror)
    • Turn off the device.
    • Boot device into bootloader (power off and boot while holding down the volume-down key, then select FASTBOOT with the power button)
    • Make sure the device is in FASTBOOT and not HBOOT
    • Connect the device to the computer via USB.
    • On your computer, open a command prompt/terminal and run:

      fastboot devices

      You should see something similar to:
      List of devices attached
      HTXXXXXXXXXX device
    • Write the image to the recovery partition ('fastboot flash recovery /path/to/<recovery>.img')
    • Do a recovery reboot to test (power off and boot holding down the volume-down key, select recovery)

    Now you can flash the latest SuperUser. (Thanks to ChainsDD!)
    1. Go to http://androidsu.com/superuser/ or download it directly here.)
    2. Copy this file to your SD card root folder (main folder of your memory card)
    3. Start clockworkmod recovery (hold down the Volume-Down key while turning on the phone), select Recovery
    4. BACKUP YOUR ROM USING CWM BEFORE ATTEMPTING ROOT!
    5. Navigate to "Backup & Restore" using the Volume Down button and press select (power button to select) then select "Backup"
    6. Select "install zip from sdcard" after backing up
    7. Then select "Choose zip from sdcard"
    8. Then select "Superuser-3.0.7-efghi-signed.zip" (or whatever file you obtained from above)
    9. Then select "Yes - install Superuser-3.0.7-efghi-signed.zip" to confirm (some have had to flash this a few times)
    10. Then go back
    11. Then reboot.
    12. You're rooted!

    I highly recommend going to the Market once you've rebooted and install "Busybox," which many rooted apps will assume is already installed.

    Download "Root Checker" to make sure everything is done correctly! :D

    Please help with these instructions.... provide feedback if I can make something more clear!

    NEW! Video Instructions:
    Click here for video instructions!

    DEBUGGING:
    • If the Revolutionary exploit hangs or seems to be taking a very long time... or if it fails altogether, then please install my Temp-Root solution above first. Then, try the perm-root again.
    • Try installing the same drivers that I listed on the first post for the Temp-Root solution. Also, make sure you've exited from HTC Sync on your PC. (it will say "out of date" if HTC Sync is still running)
    • And make sure you have USB debugging enabled.
    • If Revolutionary still fails to find your phone, re-verify you have all the drivers installed, (uninstall and reinstall) and try "disk drive" mode and then "charge only" mode.
    • Still can't figure out how to get fastboot to work? Try this post for a quick solution.
    • For those having GPS issues after this process, try installing "BusyBox" from the Market and then installing the app "FasterFix" from the Market.

    I certainly welcome feedback... and I appreciate your THANKS!

    My phones:
    HTC G1
    HTC Nexus One
    HTC Sensation
    HTC My Touch 4G Slide
    3
    My Steps on how I got my MT4GS PERM ROOTED and CW Installed...

    Below are the instructions on How I got my MT4GS s-off (after hours on doing different steps). below is a link of all the files I put together and the same instructions below. I will like to thank everyone on this forum that help put the pieces together...

    http://www.megaupload.com/?d=BP2E3ZQ3

    (Zip contains ADB.EXE FASTBOOT.EXE CWR.IMG SUPERUSER and other tools...)
    _________________________

    ***Temp Root:

    You must have the USB drivers installed for your MT4GS. (If you don't have them, you can always install from the Drivers Folder, plug in your MT4GS, and it will install the correct drivers.)

    You MUST exit from the HTC Sync application for this to work!! (Right-click on the icon in the taskbar, and select Exit)

    You must also have USB Debugging enabled. (Settings, Applications, Development, USB debugging)


    Save the Folder to C:\ADB-Windows
    Run Command Prompt as Admin (make sure you go the the directory C:\ADB-Windows\TempRoot) type commands below

    adb wait-for-device
    adb push fre3vo /data/local/tmp
    adb shell chmod 777 /data/local/tmp/fre3vo
    adb shell /data/local/tmp/fre3vo
    adb wait-for-device
    adb remount
    adb shell mount -o rw,remount rootfs /
    adb shell mount -oremount,suid /dev/block/mmcblk0p23 /data
    adb shell mkdir /vendor/bin
    adb shell chown root.shell /vendor/bin
    adb shell chmod 755 /vendor/bin
    adb push ./sqlite3 /vendor/bin
    adb push ./su /vendor/bin
    adb push ./busybox /vendor/bin
    adb shell chown root.shell /vendor/bin/su
    adb shell chown root.shell /vendor/bin/busybox
    adb shell chown root.shell /vendor/bin/sqlite3
    adb shell chmod 6555 /vendor/bin/su
    adb shell chmod 4555 /vendor/bin/busybox
    adb shell chmod 755 /vendor/bin/sqlite3
    adb shell busybox --install -s /vendor/bin
    adb shell sync
    adb shell chmod 6555 /vendor/bin
    adb install ./Superuser.apk
    pause

    You'll get errors like "An error occurred while running the exploit (-1) (errno: 14)", but if it also says "Exploiting device" afterwards, then it was successful!

    This is temp-root, meaning that you can run apps that require root, but it'll go away when you reboot. Run the script again to get root back.

    ***Permanent Root:

    YOU MAY NEED TO DISABLE YOUR ANTIVIRUS PROGRAM- Norton is flagging up Revolutionary as a Virus when it isn't.

    1. With the phone switched on (not in HBOOT, just the regular home screen), run the revolutionary.exe in the C:\ADB-Windows and if it has found your device it should read "Found your device: myTouch_4G_Slide..." (If it doesn't, see DEBUGGING, below)
    2. Once you have entered your beta key (you will need to get it from http://revolutionary.io) correctly, follow any on screen prompts or actions from revolutionary and wait for it to S-Off,
    3. You're done. Your Device will Successfully have S-OFF.... If you have S-off, your hboot will now be 1.44.1107
    4. Revolutionary will now ask you to Install clockwork recovery mod after S OFF. While you may choose to let Revolutionary do it for you, you may want to answer N and install manually below to avoid some issues with the phone not charging properly.


    ***Last Install ClockWork Recovery v4.0.0.9 (IMG located under C:\ADB-Windows folder, if you follow the steps you should still be in FASTBOOT )

    Make sure the device is in FASTBOOT and not HBOOT
    Connect the device to the computer via USB.
    On your computer, open a command prompt/terminal and run:

    fastboot devices

    You should see something similar to:
    List of devices attached
    HTXXXXXXXXXX device

    Write the image to the recovery partition ('fastboot flash recovery C:\ADB-Windows\clockworkmod.4.0.0.9.img')
    Do a recovery reboot to test (power off and boot holding down the volume-down key, select recovery)

    DONE
    3
    As far as I can tell, these are the only detailed instructions here for obtaining Permanent Root (and S-OFF). Hit THANKS if you feel inclined...

    Just to be clear, this is not my basework, but I've assembled all the pieces and instructions to make it work for the MT4GS! Thanks to revolutionary, modaco, teamWin, eugene373, idanfima, coolbho3000 and wisefire for the easyfrevo part!

    Temp Root:
    You must have the USB drivers installed for your MT4GS. (If you don't have them, you can always install HTC Sync for the Sensation, plug in your MT4GS, and it will install the correct drivers.)

    You MUST exit from the HTC Sync application for this to work!! (Right-click on the icon in the taskbar, and select Exit)

    You must also have USB Debugging enabled. (Settings, Applications, Development, USB debugging)

    http://www.megaupload.com/?d=9VN7956N
    ...This is the new version (14 August 2011) that has the most up-to-date SuperUser.apk...

    Unzip, and run the batch file (Run_ME_Fr3vo_ROOT.bat)...
    You'll get errors like "An error occurred while running the exploit (-1) (errno: 14)", but if it also says "Exploiting device" afterwards, then it was successful!

    This is temp-root, meaning that you can run apps that require root, but it'll go away when you reboot. Run the script again to get root back.

    Older (v1) of this temp-root can be found here:
    http://www.multiupload.com/M0757JL5DX
    ...just in case you run into any problems.


    Permanent Root: (thanks to ikhzter for helping with some of the instructions!)
    NOTE: If you don't have ADB working (or don't know what ADB is), please download the drivers and files for the temp-root above, and be sure to save the revolutionary.exe into the same directory as the temp-root solution. Make sure you have HTC fastboot drivers as well (if you don't already), which are on the Revolutionary page.

    NEW! Thank you Team Revolutionary! If you would like to be one of the first to get PERMANENT root access, then download the new Revolutionary, instructions here:
    http://unrevoked.com/rootwiki/doku.php/public/revolutionary
    The current version of Revolutionary, 0.4pre3, is a The current version of Revolutionary, 0.4pre3, is a developer preview. . Don't come yelling if you mess up your phone. (But do share your results, so we can collectively solve any issues!)
    You'll need your serial number (Settings, About, Phone Identity), HBOOT version (Settings, Power, uncheck "Fast Boot", then power off, hold down volume down as you power on, the HBOOT version is at the top of the screen). Be sure to write down your Beta Key!

    Note: you can also enter bootloader by issuing the command "adb reboot-bootloader" if you have the ADB & drivers installed (follow the Temp Root instructions above for drivers and ADB).

    YOU MAY NEED TO DISABLE YOUR ANTIVIRUS PROGRAM- Norton is flagging up Revolutionary as a Virus when it isn't.

    1. With the phone switched on (not in HBOOT, just the regular home screen), run the revolutionary Utility you just downloaded from http://revolutionary.io/ and if it has found your device it should read
      "Found your device: myTouch_4G_Slide..." (If it doesn't, see DEBUGGING, below)
    2. Once you have entered your beta key correctly, follow any on screen prompts or actions from revolutionary and wait for it to S-Off,
    3. You're done. Your Device will Successfully have S-OFF.... If you have S-off, your hboot will now be 1.44.1107
    4. Revolutionary will now ask you to Install clockwork recovery mod after S OFF. While you may choose to let Revolutionary do it for you, you may want to answer N and install manually below to avoid some issues with the phone not charging properly.

    Hit THANKS!

    You now have S-OFF on your MT4GS! Woo hoo!

    Next, we'll flash the latest ClockWork Recovery (v4.0.0.9 without the charging problem) if you didn't do it above: (Thanks to Paul O'Brien / Modaco!!)
    • Download the ClockworkMod image file from here or here (direct mirror)
    • Turn off the device.
    • Boot device into bootloader
    • Make sure the device is in FASTBOOT and not HBOOT
    • Connect the device to the computer via USB.
    • On your computer, open a command prompt/terminal and run:

      fastboot devices

      You should see something similar to:
      List of devices attached
      HTXXXXXXXXXX device
    • Write the image to the recovery partition ('fastboot flash recovery /path/to/<recovery>.img')
    • Do a recovery reboot to test (power off and boot holding down the volume-down key, select recovery)

    Now you can flash the latest SuperUser. (Thanks to ChainsDD!)
    1. Go to http://androidsu.com/superuser/ or download it directly here.)
    2. Copy this file to your SD card root folder (main folder of your memory card)
    3. Start clockworkmod recovery (hold down the Volume-Down key while turning on the phone), select Recovery
    4. BACKUP YOUR ROM USING CWM BEFORE ATTEMPTING ROOT!
    5. Navigate to "Backup & Restore" using the Volume Down button and press select (power button to select) then select "Backup"
    6. Select "install zip from sdcard" after backing up
    7. Then select "Choose zip from sdcard"
    8. Then select "su-2.3.6.3-efgh-signed.zip" (or whatever file you obtained from above)
    9. Then select "Yes - install su-2.3.6.3-efgh-signed.zip" to confirm (some have had to flash this a few times)
    10. Then go back
    11. Then reboot.
    12. You're rooted!

    I highly recommend going to the Market once you've rebooted and install "Busybox," which many rooted apps will assume is already installed.

    Download "Root Checker" to make sure everything is done correctly! :D

    Please help with these instructions.... provide feedback if I can make something more clear!

    DEBUGGING:
    • If the Revolutionary exploit hangs or seems to be taking a very long time... or if it fails altogether, then please install my Temp-Root solution above first. Then, try the perm-root again.
    • Try installing the same drivers that I listed on the first post for the Temp-Root solution. Also, make sure you've exited from HTC Sync on your PC. (it will say "out of date" if HTC Sync is still running)
    • And make sure you have USB debugging enabled.
    • If Revolutionary still fails to find your phone, re-verify you have all the drivers installed, (uninstall and reinstall) and try "disk drive" mode and then "charge only" mode.
    • Still can't figure out how to get fastboot to work? Try this post for a quick solution.
    • For those having GPS issues after this process, try installing "BusyBox" from the Market and then installing the app "FasterFix" from the Market.

    I certainly welcome feedback... and I appreciate your THANKS!

    My phones:
    HTC G1
    HTC Nexus One
    HTC Sensation
    HTC My Touch 4G Slide

    Did a quick how to video for this to help some people out. Feel free to link to it in the OP. Hope it helps someone!

    How To Permanently Root and Gain S-Off on the T-Mobile MyTouch 4G Slide (Revolutionary Method) -
    http://theunlockr.com/2011/09/09/ho...mobile-mytouch-4g-slide-revolutionary-method/
    2
    Tested this just now. Working just fine without any problems. Thank you so much!
    2
    maaaaan I got a headache.


    I got the Revolutionary to work and got my device on S-OFF. But I tried to manually install the latest clockwork and I'm having no success. Everytime I go in C prompt and type in "fastboot devices", it says its not a command etc etc.


    I tried to run temproot so I can do the Root Explorer/Terminal method that someone posted a few post back... but it keeps saying "daemon not running" when I click the batch and ADB keeps shutting down when I start it. I installed the fastboot drives and the HTC sync drivers and I don't know whats going on. I ain't spending the whole night doing this.

    If it keeps saying "daemon not running" then it's probably the first time you've run adb. If it says something like "adb shell out of date," you may have HTC Sync running. Look for it in your taskbar (bottom right of windows), right-click on the HTC Sync icon, and select "Exit."

    Rather that walking you through how to set up Android SDK and set your path, unzip the attached ADB-Tools, paying attention to where you unzipped them. Open a command-prompt and CD to the directory where you unzipped them, and you should have a working fastboot command.