Got it to work with m110s. but requires it undoing unbrickable mod to boot. unless it wont boot.
Hey, I need a copy of the m110s bootloaders in order to get UBM working on it. If you could supply that, it would be greate. This is a Download Mode device, not Fastboot correct?
yes its a download mode capable device. i can provide u bootloaders. bootloader attached below.
where do i need to remove? What should i do to do UnBrickable Mod? PLz Help
SHW-m130l Galaxy U
Excellent and authoritative article! Though I'm personally too scared to do anything like this on my phone!
Excellent and authoritative article! Though I'm personally too scared to do anything like this on my phone!
Unsoldering a BGA is easy.
Doing it without causing unrecoverable damage is a different story. Same for resoldering it back on.
However it is getting easier nowadays - temp-controlled hot air rework stations have dropped drastically in price - http://www.amazon.com/Updated-Aoyue-Digital-Soldering-absorber/dp/B006FA481G/ref=pd_cp_hi_3
Also, reflowing a BGA without removing it (such as for Xbox360 RRoD fixes) is a LOT easier than remove-and-replace.
Also - my personal favorite deal in terms of soldering irons is http://www.amazon.com/Aoyue-937-Dig...ref=sr_1_1?s=hi&ie=UTF8&qid=1331244730&sr=1-1 - The Aoyue 937 is amazing considering it is <$50.
the OM registers are at 0xE010E100. So we know where to look in memory to monitor changes.
$ su
# bash
bash-4.1#viewmem 0xE010E100 0x4|hexdump
[INFO] Reading 4 bytes at 0xe010e100...
0000000 0009 0000
0000004
viewmem 0xE010E100 0x4|hexdump
[INFO] Reading 4 bytes at 0xe010e100...
0000000 0029 0000
0000004