You are right. I just found this thread which confirms it also.
http://xdaforums.com/showthread.php?t=2187982
You are right. I just found this thread which confirms it also.
http://xdaforums.com/showthread.php?t=2187982
XpLoDWilD
Could you clarify some aspect about CWM recovery?
I have TF300T with stock ROM 4.2.1 official by Asus.
Which is the latest build of CWM for TF300T?
The title of the thread is CWM 6.0.2.3 / 5.5.0.4.
No info are available about CWM recovery img file on first post. Whoich are the version of CWM image file for Android 4.0) and 4.1/4.2 (JB)?
Could youa dd the instructoin how to update CWM recovery on JB 4.2 offciial stock rom?
Should be better to attach the file as .zip that include .img file (for file security/integrity).
Could you clarify some aspect about CWM recovery?
I have TF300T with stock ROM 4.2.1 official by Asus.
Which is the latest build of CWM for TF300T?
The title of the thread is CWM 6.0.2.3 / 5.5.0.4.
No info are available about CWM recovery img file on first post. Whoich are the version of CWM image file for Android 4.0) and 4.1/4.2 (JB)?
Could youa dd the instructoin how to update CWM recovery on JB 4.2 offciial stock rom?
Should be better to attach the file as .zip that include .img file (for file security/integrity).
This recovery doesn't work with 4.2 go check out the TWRP recovery. Make sure you get the one for 4.2 or you could get a soft brick
Sent from my AOKP Galaxy S4
Last edited:
It will say on the list of downloads if its 4.2. And use the .blob
Sent from my AOKP Galaxy S4
I'm honestly not completely sure what the difference is between the two. But I used the .blob file only and everything is working great. If the newest version of TWRP isn't working right try going back to TWRP 2.5
Sent from my AOKP Galaxy S4
Sorry to maybe ask a complete noob question. I've unlocked my device. But upon booting with PWR BTN + VOL DOWN I do not get any USB option. What am I doing wrong?
i have a uscc gs3 (sch-r530u) that had the official android 4.3 update from uscc
i now am rooted and running CM11 with cwmr 6.0.4.5 and i installed supersu 1.86
everything if fine but when i boot into cwmr and tell it to reboot phone i always see a "fix root (/system/xbin/su)"
should i tell it to fix it or tell it no like i have been
1 more big thing
when we create a backup i been hearing they dont restore ok because of knox in android 4.3
can we restore with no problems on this phone with the software i mentioned above or is it bad to do it
i now am rooted and running CM11 with cwmr 6.0.4.5 and i installed supersu 1.86
everything if fine but when i boot into cwmr and tell it to reboot phone i always see a "fix root (/system/xbin/su)"
should i tell it to fix it or tell it no like i have been
1 more big thing
when we create a backup i been hearing they dont restore ok because of knox in android 4.3
can we restore with no problems on this phone with the software i mentioned above or is it bad to do it
I know that this is a major noob issue from my behalf, but is there a NOOB Walk through that I can hold hands and point saying "ohhh that's what they were talking about" guide somewhere to root and install the latest CM or 4.4 rom? Ive been to countless guides that say use a pc, or try these easy steps. I've downloaded countless versions of twrp's, gapps, and factory resets. I don't have an option for USB when I press and hold power and vol down. Only rck, android and wipe data. I'm running the latest boot loader and the device is unlocked (did it on my own,Yay me) but that's about it. Ive tried to watch you tude vids (all lame and always never a good explanation). PLEASE HELP. I'm almost regreeting getting this item and going back to Ifad. PLEASE HELP keep a fellow android'ite I the loop.
I have rooted and unrooted several other android devices in the past (Note 2, Note, HTC Desire HD, and a few older one's)
Stats:
Official Jellybean 4.2.1
Build #: 10.6.1.27.5
Kernal Ver: 3.1.10-g215
PC Stats:
Win 8
Thanks
I have rooted and unrooted several other android devices in the past (Note 2, Note, HTC Desire HD, and a few older one's)
Stats:
Official Jellybean 4.2.1
Build #: 10.6.1.27.5
Kernal Ver: 3.1.10-g215
PC Stats:
Win 8
Thanks
When you boot into your bootloader screen (the one with the rck icon)... Does it not say in the upper left hand in white writing 'starting fastboot protocol' ???
Let me know thx lj
I know that this is a major noob issue from my behalf, but is there a NOOB Walk through that I can hold hands and point saying "ohhh that's what they were talking about" guide somewhere to root and install the latest CM or 4.4 rom? Ive been to countless guides that say use a pc, or try these easy steps. I've downloaded countless versions of twrp's, gapps, and factory resets. I don't have an option for USB when I press and hold power and vol down. Only rck, android and wipe data. I'm running the latest boot loader and the device is unlocked (did it on my own,Yay me) but that's about it. Ive tried to watch you tude vids (all lame and always never a good explanation). PLEASE HELP. I'm almost regreeting getting this item and going back to Ifad. PLEASE HELP keep a fellow android'ite I the loop.
I have rooted and unrooted several other android devices in the past (Note 2, Note, HTC Desire HD, and a few older one's)
Stats:
Official Jellybean 4.2.1
Build #: 10.6.1.27.5
Kernal Ver: 3.1.10-g215
PC Stats:
I have the same problems....
These are my specs:
This is what i have when vol down & power:
Follow my thread. This thread is outdated.
http://xdaforums.com/showthread.php?t=2632095
Sent from my GS3 on AOSB 4.4.2 using Tapatalk 4
Problem
My digirizer is not working so I need a recovery in order to root and install the "driver".
I'm on 4.2.1
TWRP is touch based and it can't detect usb mouse. CWM is incompatible with this android version.
What can I do?
thanx
My digirizer is not working so I need a recovery in order to root and install the "driver".
I'm on 4.2.1
TWRP is touch based and it can't detect usb mouse. CWM is incompatible with this android version.
What can I do?
thanx
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
157Hi everyone!
I'm proud to present CWM recovery for our beloved TF300T !
Code:#include /* * Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about this recovery * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at me for messing up your device, I will laugh at you. */
Requirements:
- TF300T
- Fastboot (Included in Android SDK, or Google for a recent version. SDK is the best way to go.)
- Unlocked bootloader (look on Asus Support Download)
Step-by-step guide
- Download the right CWM version. If you are running official Jelly Bean ASUS rom, you need the Jelly Bean version. Otherwise, take the normal version.
- Unlock your bootloader with Asus Unlock app
- Connect your tablet to your computer
- Shutdown your tablet
- Hold Power + Vol Down until a message appears (it doesn't appear anymore on Jelly Bean bootloader) ("Press Vol. Up to enter RCK (5s)") : DON'T PRESS VOL UP
- After 5 seconds, a new menu appears (if it's not already there). Press Vol Down once to change to the USB icon, then press Vol. Up to validate (you have to do this in less than 10 seconds, otherwise your tablet will boot Android OS)
- At this point, your computer should recognize Fastboot device (Windows will notify you here, OSX/Linux stays calm)
- Flash recovery image with fastboot: fastboot -i 0x0B05 flash recovery recovery.img (if we suppose recovery.img is in your current directory)
- Once the operation is done, type fastboot -i 0x0B05 reboot to reboot your tablet
You now have CWM installed. To access it, shutdown your tablet and press Power + Vol Down, then either press Vol Up before the 5s timeout or press Vol Up on the "RCK" icon. After a few seconds, you'll be in CWM interface.
- Can I backup/restore at anytime?
Yes, you can use all CWM features without any restriction.
- Can it break something?
Even in case of error during fastboot, only your recovery partition will be broken. You can reflash it as many times as you want via fastboot, and even with a broken recovery partition you can still successfully boot your tablet.
- Does this bring root?
See second post.
- Does it work with any firmware?
Yes.
- I wiped everything but didn't put a ROM on my sdcard, what to do?!
Calm down, you're not bricked, you're just a bit dumb. Go in "Install zip from sdcard" until you reach list files, so the sdcard is mounted. Then, open a command prompt, and do "adb push c:\path\to\the\rom.zip /sdcard/". Wait, and once done your rom.zip will appear in the files list when you go back and forth in files list.
If you have any question, feel free to discuss in this topic. You can also join us on Freenode, #teamhacksung-support (don't be afraid, people there are mostly Samsung)
If you want to support me, hit the Donate to me button up ahead under my nickname. It's greatly appreciated.7
Let's re-do it step by step:
- Put fastboot.exe and recovery.img in C:\recovery\
- Open cmd, type "cd c:\recovery"
- Connect your tablet in fastboot mode
- type fastboot -i 0x0B05 flash recovery recovery.img
There's no reason it wouldn't work5Here is the Video guide to set up CWM on your TF300. I hope you like it
If this helped in any way, please feel free to press the THANKS button and if you do happen to have a few clicks to spare, please go to our channel to LIKE, COMMENT and SUBSCRIBE as we'd really appreciate it, Thanks in advance - TF300T
