FORUMS
Remove All Ads from XDA

[ROM] ViewCOMB 3.2 - Honeycomb 3.2 for ViewPad 10s (Advent Vega)

72 posts
Thanks Meter: 45
 
By vujke025, Member on 30th October 2011, 12:40 PM
Post Reply Email Thread
1st November 2011, 03:10 AM |#21  
Senior Member
Flag Singapore
Thanks Meter: 12
 
More
Quote:
Originally Posted by vujke025

MD5 checksum: 8db15a35abaf820e9583f5742e3a3363

same MD5. stuck at the same place again.
 
 
1st November 2011, 04:54 AM |#22  
Member
Flag Masterton
Thanks Meter: 7
 
More
These flashing issues are unusual, I have two vega's and when vegacomb came out with version 9b flashable exe, one worked fine the other would not, I ended up having to flash modded_stockv2 then upgrading to 9n, yet both these tablets took the flashing of this rom fine.
1st November 2011, 10:59 AM |#23  
Member
Flag Hardenberg
Thanks Meter: 25
 
More
the sensors are working slow, is there a possibility to fix this in the future.

autorotiation is working slow because of this and games are not playable with this.
1st November 2011, 11:28 AM |#24  
vujke025's Avatar
OP Member
Thanks Meter: 45
 
More
Quote:
Originally Posted by daniel.olsman

the sensors are working slow, is there a possibility to fix this in the future.

autorotiation is working slow because of this and games are not playable with this.

Should be fixed in next version.
1st November 2011, 01:06 PM |#25  
vujke025's Avatar
OP Member
Thanks Meter: 45
 
More
I re-built the file and re-uploaded in the first post.
MD5 checksum: 9833a9ccce94e600b1be34ec38e503cb
1st November 2011, 03:08 PM |#26  
Senior Member
Flag Singapore
Thanks Meter: 12
 
More
Quote:
Originally Posted by vujke025

I re-built the file and re-uploaded in the first post.
MD5 checksum: 9833a9ccce94e600b1be34ec38e503cb

possible to come up with flashable cwm zips?

---------- Post added at 10:08 PM ---------- Previous post was at 09:45 PM ----------

Nvflash started
rcm version 0X20001
System Information:
chip name: t20
chip id: 0x20 major: 1 minor: 3
chip sku: 0x8
chip uid: 0x028040c640ffa0d7
macrovision: disabled
hdcp: enabled
sbk burned: false
dk burned: false
boot device: nand
operating mode: 3
device config strap: 0
device config fuse: 0
sdram config strap: 0

sending file: H5PS1G83EFR-S6C_V24_0625.bct
- 4080/4080 bytes sent
H5PS1G83EFR-S6C_V24_0625.bct sent successfully
odm data: 0xb0c0075
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
| 941512/941512 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 1 0
creating partition: BCT
creating partition: PT
creating partition: EBT
creating partition: MSC
creating partition: SOS
creating partition: LNX
creating partition: APP
creating partition: CAC
creating partition: USP
creating partition: UDA
Formatting partition 2 BCT please wait.. done!
Formatting partition 3 PT please wait.. done!
Formatting partition 4 EBT please wait.. done!
Formatting partition 5 MSC please wait.. done!
Formatting partition 6 SOS please wait.. done!
Formatting partition 7 LNX please wait.. done!
Formatting partition 8 APP please wait.. done!
Formatting partition 9 CAC please wait.. done!
Formatting partition 10 USP please wait.. done!
Formatting partition 11 UDA please wait.. done!
done!
sending file: bootloader.bin
| 941512/941512 bytes sent
bootloader.bin sent successfully
sending file: recovery.img
/ 5242880/5242880 bytes sent
recovery.img sent successfully
sending file: boot.img
/ 7602176/7602176 bytes sent
boot.img sent successfully
sending file: system.img
| 41877504/161929152 bytes sent

and stucked again.
1st November 2011, 03:36 PM |#27  
vujke025's Avatar
OP Member
Thanks Meter: 45
 
More
Quote:
Originally Posted by chilledrice

possible to come up with flashable cwm zips?

---------- Post added at 10:08 PM ---------- Previous post was at 09:45 PM ----------

Nvflash started
rcm version 0X20001
System Information:
chip name: t20
chip id: 0x20 major: 1 minor: 3
chip sku: 0x8
chip uid: 0x028040c640ffa0d7
macrovision: disabled
hdcp: enabled
sbk burned: false
dk burned: false
boot device: nand
operating mode: 3
device config strap: 0
device config fuse: 0
sdram config strap: 0

sending file: H5PS1G83EFR-S6C_V24_0625.bct
- 4080/4080 bytes sent
H5PS1G83EFR-S6C_V24_0625.bct sent successfully
odm data: 0xb0c0075
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
| 941512/941512 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 1 0
creating partition: BCT
creating partition: PT
creating partition: EBT
creating partition: MSC
creating partition: SOS
creating partition: LNX
creating partition: APP
creating partition: CAC
creating partition: USP
creating partition: UDA
Formatting partition 2 BCT please wait.. done!
Formatting partition 3 PT please wait.. done!
Formatting partition 4 EBT please wait.. done!
Formatting partition 5 MSC please wait.. done!
Formatting partition 6 SOS please wait.. done!
Formatting partition 7 LNX please wait.. done!
Formatting partition 8 APP please wait.. done!
Formatting partition 9 CAC please wait.. done!
Formatting partition 10 USP please wait.. done!
Formatting partition 11 UDA please wait.. done!
done!
sending file: bootloader.bin
| 941512/941512 bytes sent
bootloader.bin sent successfully
sending file: recovery.img
/ 5242880/5242880 bytes sent
recovery.img sent successfully
sending file: boot.img
/ 7602176/7602176 bytes sent
boot.img sent successfully
sending file: system.img
| 41877504/161929152 bytes sent

and stucked again.

It's definitely up to your device. I tested it several times works perfectly. I will provide zip during the day, but remember the system partition must be at least 155MB, otherwise you will soft brick brick your tablet.
1st November 2011, 10:56 PM |#28  
Member
Flag Hardenberg
Thanks Meter: 25
 
More
Quote:
Originally Posted by vujke025

Should be fixed in next version.

Thnx, would be great!

Sent from my X8 using XDA App
2nd November 2011, 10:44 PM |#29  
Senior Member
Thanks Meter: 14
 
More
Hi there,
I read about BT improvements in build 6? What are they and will we be able to assign a com port for a BT GPS?

Also does anyone here have any experience with a USB GPS mouse? Or maybe knows of 1 that works of the bat? on the 10s, Or will they all?
I read somewere that there were already kernel modules compiled for USB GPS but i failed to find them and as far as i can tell they are not loaded atm

Thanks in advance
Have fun!
Caved
3rd November 2011, 09:26 AM |#30  
Junior Member
Thanks Meter: 0
 
More
Great rom ... make my 10S work like a charm ... thanks so much
3rd November 2011, 04:07 PM |#31  
jayk32's Avatar
Senior Member
Flag Herts
Thanks Meter: 344
 
More
@OP

First off thanks for ur efforts but I'm going back to VegaComb, cause this Rom is alot slower. Plus too many apps keep closing, whilst I didn't have these problems with VegaCOMB.
Thanks again.
Post Reply Subscribe to Thread

Tags
honeycomb, vega, vegacomb, viewcomb, viewpad 10s

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes