ze7zez
Recognized Contributor
- Aug 24, 2012
- 5,358
- 2
- 3,273
Sorry, I had to replace v0.7 with a hotfix (v0.75) because WiFi has not been working.
The root cause has been the latest kernel version (with SmartassH3 + extended frequency table). I have rolled-back the kernel to the more decent variant.
If you have already flashed carbon v0.7, then you can just flash the old CarbonizedKernel 0.5 instead of flashing the new rom.
Have a nice evening!
Please correct address (carbon-rom.com -> carbonrom.com) on the first page of the thread, because Opera verified.
what is CarbonizedKernel 0.5 ?
Could it install for other Rom??
- New kernel patch: "Carbonized-Kernel-0.5" which is mainly based on Evervolv's qsd8k and has a good selection of tweaks (kudos @croniccorey and @EViollet):
-- BFS (Brain F*ck Scheduler)
-- HAVS (Hybrid Adaptive Voltage Scaling; dynamically changes the phones voltage; should use up less battery)
-- Lots of different CPU governors (Lazy [thanks @Ezekeel], Lagfree, Smartass, InteractiveX, etc.)
-- Default CPU gov is SmartassV2 which is said to offer a great balance between performance and battery life
-- Extended CPU freq table: Min. CPU freq: 175MHz; Max. CPU freq: 1500MHz (!)
-- Read ahead 2048Kb
i tried v 0.6 but was a little bit laggy, is this fixed in 0.7?
Sure!!I just tried and cannot reproduce the problem.
Did you install with full wipe?
Sometimes after receiving a massage, the screen does not turn on!!
No matter what you do, it's stuck and the only way out is to reboot!!
Any solutions?
I get the same issue with v0.7 + 0.5 kernel. Seems like cpu high setting keeps reseting back 175 MHz no matter what I set it to. I've reverted back to v0.6 which works fairly well.
Good to know. I will try to remove 175MHz in the next kernel version. You could also flash v0.75 instead of going back as it has a kernel with default frequency table.
Sent from my Nexus 4 using XDA Free mobile app
v0.75 was no success for me. I saw these 2 major issues before reverting back to v0.6:
- wifi not working. It activates and shows available networks. Connection seems to work looking at status message, but no wifi icon will show in status bar and mobile data is always active.
- spontaneous reboots. Both before I managed to activate a2sd and after.
Of course I've checked md5sum of the download and performed a full wipe.
Strange. I cannot reproduce it. Anyone else having this?
Sent from my Nexus 4 using XDA Free mobile app
v0.75 was no success for me. I saw these 2 major issues before reverting back to v0.6:
- wifi not working. It activates and shows available networks. Connection seems to work looking at status message, but no wifi icon will show in status bar and mobile data is always active.
- spontaneous reboots. Both before I managed to activate a2sd and after.
Of course I've checked md5sum of the download and performed a full wipe.
For the network connection, you can also try go to your network provider.
There should be a way to install network APN setting.
Please feel free to look at, build, and use our code on CarbonDev Github.
repo init -u https://github.com/spezi77/carbon.git -b kk
repo sync
1) Backup your current rom
2) Full wipe and then flash rom
3) Wipe battery stats
4) IMPORTANT: On first boot have the charger plugged in!
5) Reboot and let the rom settle down (3-5 min)
6) Enable A2SD (see below)
7) Reboot into recovery and install the slim gapps package provided in this thread
1. run Terminal Emulator
2. type 'su' and press enter
3. allow root access in the popup query
4. type 'a2sd install' and press enter
5. reply to questions in this order
--> y n y (dalvik to card - yes, data to card - no, reboot - yes)