FORUMS
Remove All Ads from XDA

How to Fix broken IMEI on Galaxy Fit S5670

12 posts
Thanks Meter: 5
 
By Kim Entity, Junior Member on 21st February 2014, 02:13 AM
Post Reply Email Thread
This Thread is recopiled info from web and xda, thanks to xda forum and to Nisiomorais who helped me in fix this weird issue.
You must do this only if your IMEI its shown 000000000000000 or similar.


Disclaimer:

I´m not responsible for a phone damage or bricked by doing wrong this method. You must do this exactly as I wrote and will be no risk of any issue.


1-Download EFS Professional from here:

http://forum.xda-developers.com/show....php?t=1308546

Thanks to lyriquidperfection for this wonderfull tool.

2-Download QPST installer

http://forum.xda-developers.com/show....php?t=1946915

Thanks him again.

3-Download Samsung USB Drivers

http://forum.xda-developers.com/show....php?t=2038555

4-Flash Original Stock Firmware for prevent issues. See on the forum on how to do that if you don't know.

5-Use the Original Samsung USB Cable.



Procedure.

*Read carefully before doing some of the tutorial down below*

1-Write down your Original IMEI from the back of your Phone, it has to be on the back of the phone, below the battery.

2-Install Samsung USB Drivers

3-Connect the Phone by the USB cable to the PC using only one port.

4-Let the PC do some recognition.

5-Put Phone into USB Debug mode (Settings>Applications>Development) and let it do again some recognition and configuration of the USB port.

6-Unplug and replug the USB using same port.

7-Dial *#7284# and choose "USB" Option to enable Diag mode

8-Open EFS Professional, Choose Qualcomm NV Tools

9-In Available COM Ports it has to say "SAMSUNG Android USB Diagnostic Serial port (WDM)"

10-Remove Send SPC and Read Phone Marks.

11-Clic on "Connect"

12-In The Phone Mode category The "Online" Tab has to appear to be Enabled now.

13-In the Category "IMEI Repair" Put the IMEI that you have to the IMEI Box.

14-Go to "Write To:", choose in the tab "Device", and then clic on "Write". It will appear "IMEI Succesfully Written".

Reboot.



FACING PROBLEMS WITH THE USB CONNECTION.

This procedure can be done if diag connection fails, but i'm not sure if this method do the trick with the USB recognition issue. I've done the two methods and it worked for me. You can choose to do one or the two together. Nothing to fear by doing the process. Its safe.

Put the phone on USB Diag mode by dialing *#7284# and choosing "USB" Option.

Install QPST installer, and open "QPST Configuration", go to "Ports", and "Add New Port...", choose the port and close the program.

Now open EFS Professional and do the steps that appeared above.

Hope it helps, so sorry for my english. I´m from Chile.
The Following 4 Users Say Thank You to Kim Entity For This Useful Post: [ View ] Gift Kim Entity Ad-Free
 
 
4th September 2014, 02:06 PM |#2  
dugeriss's Avatar
Senior Member
Flag Aku neng mburimu yo!
Thanks Meter: 299
 
More
Awesome sir
8th June 2015, 02:07 PM |#3  
Junior Member
Flag dehradun
Thanks Meter: 7
 
More
Thumbs up vohooo
THAnks brother
it really works thought i'd screwed my imei . you saved my day
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes