And you have been on latest stock rom in the past?
:good:
:good:
---------- Post added at 19:20 ---------- Previous post was at 18:54 ----------
Next try. Please test it and give feedback (log's). Next version (V2) [I still have an idea what could be the problem] will follow in a few hours...
Hmmmm....
That was a missing blob. Fixed.
:good: My next version (V2) is up in about 30 minutes... :fingers-crossed:
My latest version from today? No errors? No freeze's? Weird!
Hmmmm. No idea. Can't test it because I'm developing "blind"; I don't have an E68** for testing... :angel:I cannot take a screen shot I have enabled the screenshot power button option bit when I try to use it I constantly get an error saying taking screenshots is not allowed by the app? I have tried pressing vol down and power but this does nothing. Please advise.
Hmmmm....
That was a missing blob. Fixed.
:good: My next version (V2) is up in about 30 minutes... :fingers-crossed:
My latest version from today? No errors? No freeze's? Weird!
Hmmmm. No idea. Can't test it because I'm developing "blind"; I don't have an E68** for testing... :angel:
---------- Post added at 23:20 ---------- Previous post was at 22:56 ----------
And here it is!
Please don't forget the log's...
Thanks! Shows the same error in logcat...
I don't know what you are talking about, sorry.In the setup wizard of v2 I always throw it backwards. I am unfortunately unable to log if the settings are passed from the notifications. I tried 4-5 times, but unfortunately I could not fix it. If you can skip the setup wizard, we can make it more comfortable.
Thanks! Shows the same error in logcat...
I don't know what you are talking about, sorry.
I'm actually building a new version with other blob's... It will be up in about three hours.
Hmmmm....
That was a missing blob. Fixed.
:good: My next version (V2) is up in about 30 minutes... :fingers-crossed:
My latest version from today? No errors? No freeze's? Weird!
Hmmmm. No idea. Can't test it because I'm developing "blind"; I don't have an E68** for testing... :angel:
---------- Post added at 23:20 ---------- Previous post was at 22:56 ----------
And here it is!
Please don't forget the log's...
Thanks! I'll take a closer look at the log's... :good:
Thanks! I'll take a closer look at the log's... :good:
---------- Post added at 13:44 ---------- Previous post was at 13:39 ----------
One short question: Is SIM card detected and working?
Here is my next version. Don't forget the logs...
Hmmmm, I'm a little bit frustrated! I don't know where to seach if this version is not working too ... I've asked for help; but no really helpful reaction!
Here is my next version. Don't forget the logs...
Hmmmm, I'm a little bit frustrated! I don't know where to seach if this version is not working too ... I've asked for help; but no really helpful reaction!
Thanks for the test and the log's!Hi man i try it but frozen again. start and than 2 minutes and frozen
CPU | Quad-core 2.0 GHz ARM® Cortex™ A57 and Quad-core 1.5 GHz ARM® Cortex™ A53
CHIPSET | Qualcomm MSM8994 Snapdragon 810
[ 0.003737] /cpus/cpu@0: Missing clock-frequency property
[ 0.003750] /cpus/cpu@1: Missing clock-frequency property
[ 0.003763] /cpus/cpu@2: Missing clock-frequency property
[ 0.003776] /cpus/cpu@3: Missing clock-frequency property
[ 0.003789] /cpus/cpu@100: Missing clock-frequency property
[ 0.003803] /cpus/cpu@101: Missing clock-frequency property
[ 0.003819] /cpus/cpu@102: Missing clock-frequency property
[ 0.003834] /cpus/cpu@103: Missing clock-frequency property
[ 0.009883] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
[ 0.018787] MSM Memory Dump base table set up
[ 0.018820] MSM Memory Dump apps data table set up
[ 0.018921] disabling /soc/serial@f991e000 node
[ 0.022004] msm8994-v2: configuring clocks for the A57 cluster
[ 0.022057] msm8994-v2: finished configuring A57 cluster clocks.
[ 0.070596] Brought up 6 CPUs
[ 0.070613] SMP: Total of 6 processors activated.
Thanks for the test and the log's!
Something is going wrong... We have an octa core
Quote of dmesg:Code:CPU | Quad-core 2.0 GHz ARM® Cortex™ A57 and Quad-core 1.5 GHz ARM® Cortex™ A53 CHIPSET | Qualcomm MSM8994 Snapdragon 810
Six CPUs have been brought up!Code:[ 0.003737] /cpus/cpu@0: Missing clock-frequency property [ 0.003750] /cpus/cpu@1: Missing clock-frequency property [ 0.003763] /cpus/cpu@2: Missing clock-frequency property [ 0.003776] /cpus/cpu@3: Missing clock-frequency property [ 0.003789] /cpus/cpu@100: Missing clock-frequency property [ 0.003803] /cpus/cpu@101: Missing clock-frequency property [ 0.003819] /cpus/cpu@102: Missing clock-frequency property [ 0.003834] /cpus/cpu@103: Missing clock-frequency property [ 0.009883] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available [ 0.018787] MSM Memory Dump base table set up [ 0.018820] MSM Memory Dump apps data table set up [ 0.018921] disabling /soc/serial@f991e000 node [ 0.022004] msm8994-v2: configuring clocks for the A57 cluster [ 0.022057] msm8994-v2: finished configuring A57 cluster clocks. [ 0.070596] Brought up 6 CPUs [ 0.070613] SMP: Total of 6 processors activated.
Is there someone else who could test my actual version (...2018-09-15...)? Maybe something is wrong with your device?
Here is my next version. Don't forget the logs...
Hmmmm, I'm a little bit frustrated! I don't know where to seach if this version is not working too ... I've asked for help; but no really helpful reaction!
Hey guys
So I installed this ROM today on my E6833 but it doesn't recognize my sim card ,it says no sim card
I tried rebooting and putting it into airplane mode but nothing helped
Can someone please help ?
Thank you
If you (or someone else with a lot of knowledge in c++ programming *)) help me to debug the camera issue **), there will be hope. I'm working several weeks now but there are no improvements.
12-14 17:46:35.240 619 619 I CamProvider@2.4-impl: initialize: (bt): Beginn - open_legacy, Kamera-Nr. 1
12-14 17:46:35.240 619 619 I CamComm1.0-CamModule: openLegacy: (bt): Beginn - open_legacy
12-14 17:46:35.241 619 619 I camera-hal: camera_module.cpp(102):registerCamera: open was requested by non Sony camera app
12-14 17:46:35.241 619 619 I camera-hal: SonyCameraHardware.cpp(7541):HAL_openCameraHardware: cameraId=1
12-14 17:46:35.241 619 619 I camera-hal: SonyCameraHardware.cpp(1157):HAL_Camera_GetNumberOfCameras: HAL_gCameraNum=2
12-14 17:46:35.241 619 619 I camera-hal: SonyCameraHardware.cpp(7547):HAL_openCameraHardware: cameraNum=2
12-14 17:46:35.304 619 619 I camera-hal: SonyCameraHardware.cpp(7557):HAL_openCameraHardware: created hardware=0xef0d8000
12-14 17:46:35.304 619 619 I camera-hal: camera_hal.cpp(596):module_api_open_legacy_device: ret 0
12-14 17:46:35.304 619 619 I CamComm1.0-CamModule: openLegacy: (bt): Ende - open_legacy; Resultat: 0
12-14 17:46:35.304 619 619 I CamProvider@2.4-impl: initialize: (bt): Ende - open_legacy, Kamera-Nr. 1; Resultat: 0
12-14 17:46:35.305 619 619 I CameraProviderManager: Connecting to new camera provider: legacy/0, isRemote? 0
12-14 17:46:35.306 619 619 I CameraProviderManager: Enumerating new camera device: device@1.0/legacy/0
12-14 17:46:35.306 619 619 I CamDev@1.0-impl: CameraDevice: (bt): module->getNumberOfCameras()
12-14 17:46:35.306 619 619 I CamComm1.0-CamModule: getNumberOfCameras: (bt): mModule->get_number_of_cameras()
12-14 17:46:35.306 619 619 I camera-hal: camera_hal.cpp(463):module_api_get_number_of_cameras: num 2
12-14 17:46:35.308 619 619 I CamDev@1.0-impl: Opening camera 0
12-14 17:46:35.308 619 619 I CamComm1.0-CamModule: openLegacy: (bt): Beginn - open_legacy
12-14 17:46:35.308 619 619 I camera-hal: camera_module.cpp(102):registerCamera: open was requested by non Sony camera app
12-14 17:46:35.308 619 619 I camera-hal: SonyCameraHardware.cpp(7541):HAL_openCameraHardware: cameraId=0
12-14 17:46:35.308 619 619 I camera-hal: SonyCameraHardware.cpp(1157):HAL_Camera_GetNumberOfCameras: HAL_gCameraNum=2
12-14 17:46:35.308 619 619 I camera-hal: SonyCameraHardware.cpp(7547):HAL_openCameraHardware: cameraNum=2
12-14 17:46:35.308 619 619 E camera-hal: SonyCameraHardware.cpp(7507):createInstance: Singleton promote failed
12-14 17:46:35.308 619 619 I camera-hal: SonyCameraHardware.cpp(7557):HAL_openCameraHardware: created hardware=0x0
12-14 17:46:35.308 619 619 E camera-hal: camera_hal.cpp(563):module_api_open_device_1: Can't open camera hardware.
12-14 17:46:35.309 619 619 I camera-hal: camera_hal.cpp(596):module_api_open_legacy_device: ret -19
12-14 17:46:35.309 619 619 I CamComm1.0-CamModule: openLegacy: (bt): Ende - open_legacy; Resultat: -19
12-14 17:46:35.309 619 619 E CamDev@1.0-impl: Could not open camera 0: -19
12-14 17:46:35.309 619 619 E CameraProviderManager: DeviceInfo1: Unable to open camera device 0 to check for a flash unit: INTERNAL_ERROR
https://github.com/LineageOS/android_hardware_interfaces/tree/lineage-15.1
https://github.com/LineageOS/android_frameworks_av/tree/lineage-15.1
New version out; see 1st post.