what kind of cable would I need to use 16gb flash drive? also great work cotulla this just awesome thanks
Wow, great work. I will try.
I have a question: If it works for me, is it allowed to cook in USBH in my rom ?
Thanks for developing.
Hardy
I have a question: If it works for me, is it allowed to cook in USBH in my rom ?
Thanks for developing.
Hardy
Yes, mouse with invisible cursor. But I can't advise you any program. Maybe you can search descriptions how to connect mouse to old PDAs with USB Host, like Loox 720.
Android doesn't support USB Host?
I know some new devices from Samsung implemented this feature, but I guess it's a lot of different changes inside Android by Samsung
Was designed only for LEO (HD2). I doubt it will work with S200.
I need ask other DFT members.
In general nothing against allowing including it into custom ROMs, because we won't develop new version of this.
But! Other important thing that it's not stable and can cause issues for users.
(Like I once activated USB Host during active connection to PC and got BSOD on PC
)So if you include it into ROM, users won't be warned about anything(because they don't read instructions, here they need at least find a CAB....
Anyway I will answer a bit later.
Last edited:
Android doesn't support USB Host?
I know some new devices from Samsung implemented this feature, but I guess it's a lot of different changes inside Android by Samsung
I think Android for HD2.
Nice to see still development for windows mobile !! Very good !
By the way cotulla, I guess that all the pen drive connected to the phone need to be externaly powered right ? DO you have experiment any pens that got power from the phone ?!?
By the way cotulla, I guess that all the pen drive connected to the phone need to be externaly powered right ? DO you have experiment any pens that got power from the phone ?!?
Dark Forces Team with Cotulla did it again: they proved impossible to be possible . Thank you for your hard work, this is so awesome to see on our beloved HD2s.
. Thank you for your hard work, this is so awesome to see on our beloved HD2s.but S200 has same chipset as HD2 - QSD 8250...When I will have the necessary cables, I will try it.
Cotulla the Great! As a Leo. Than still us will surprise the tsar of animals and DFT?
Thank's for the job!
Thank's for the job!
respect++++++
we must donate more often
we need cotulla working more often in this
king of crazy things
we must donate more often
we need cotulla working more often in this
king of crazy things
Hey guys and what about DHD usb host? Mabye there is a clue for AndroLeo?
xdaforums.com/showthread.php?t=993152
xdaforums.com/showthread.php?t=993152
@Cotulla
Thanks for your answer.
I am cooking my rom only for me or some friends.
They knows about the features or risks in my rom.
But I will wait for the answers from the other DFT-members.
Thanks.
Hardy
Thanks for your answer.
I am cooking my rom only for me or some friends.
They knows about the features or risks in my rom.
But I will wait for the answers from the other DFT-members.
Thanks.
Hardy
Similar threads
- Poll
- Poll
Top Liked Posts
-
There are no posts matching your filters.
-
66DFT LEO USBH WM65
Introduction
this project was started long time ago, but then, during luck of free time for this project, it was suspended.
Now, because it seems very hard to improve it more, we make decision to release developed stuffs. Also more interesting projects now appear
About release
This release contains drivers designed to allow connect different USB devices to HTC LEO (HTC HD2)
Those drivers designed for Windows Mobile 6.5 OS and they were successfully tested on 3.14 ROM. Other ROMs are not tested.
For using USB host ability you need use special cable or self-powered USB hub.
More information can be found here
This release supports HID and MassStorage profiles.
You can connect UsB Mouse, USB Keyboard, USB Stick, USB Hard Disk.
Of course, you need enough external power for devices.
Please remember, this is some kind of demonstration,
this implementation sometimes isn't stable and you can have issues during usage.
PLEASE MAKE DATA BACKUP BEFORE INSTALLING!
Installation:
1. Install CotullaCert.cab
2. Install DFT_LEO_USBH_WM65.CAB.
3. Reset.
Usage:
1. Programs -> USBH Switch
2. Disconnect from PC.
3. Press "Switch to Host" button.
4. Connect host device.
5. After some time it should be detected.
6. You can try to use it.
7. After usage you need reset your device to go back USB client mode.
NOTE: It's not recommended to connect device to PC during USB Host mode active!
Disclaimer:
This product is free to use at your own risk. We take no
responsibility for any conflict, fault, or damage caused by
this unlocking procedure. No warranties, implied or otherwise, are given if you agree to use this product.
No problems were found while testing this product on several different devices, your experience may vary.
Use of the Product for commercial purposes is strictly prohibited and to prohibit the use by xda.cn Forum.
USBH Switch program:
How it can looks in the real :
on picture you see a USB hub (without external power), a self made Y cable, LEO1024, USB mouse, USB Memory Stick and a bunch of cables.
I can see data on USB stick inside file explorer and can control device by mouse (cursor invisible by default). White cable go to USB male which used as VBUS 5V source.
18.08.2011
DFT, Cotulla9You know that we are hobby team, so we acts like free painters
doing something when we like it or drop it and continue with something else, much more interesting at the current moment. then return back to old project with new ideas. It's just some kind of art
ETA, time lines, plans - all this make hobby extremely boring
So we can't and never promise anything exactly...
So you should not read "we working under ABC" as "they will release ABC soon".
You should read it as "they looking now to ABC, but if stars of the sky located in the triangle with angles 60 degrees, they will able to successfully finish it and then release it"2
Yes, mouse with invisible cursor. But I can't advise you any program. Maybe you can search descriptions how to connect mouse to old PDAs with USB Host, like Loox 720.
Android doesn't support USB Host?
I know some new devices from Samsung implemented this feature, but I guess it's a lot of different changes inside Android by Samsung
Was designed only for LEO (HD2). I doubt it will work with S200.
I need ask other DFT members.
In general nothing against allowing including it into custom ROMs, because we won't develop new version of this.
But! Other important thing that it's not stable and can cause issues for users.
(Like I once activated USB Host during active connection to PC and got BSOD on PC )
So if you include it into ROM, users won't be warned about anything(because they don't read instructions, here they need at least find a CAB....
Anyway I will answer a bit later.1Wow, impressive work! I don't use the HD2 anymore, but it's bloody great to see some real good dev work being done on it, especially for WM6.5!
