Cwm v5.0.2.7 For LG Nitro HD (P930) /Optimus LTE
Current Status: Operational
Installation/Update Instructions:
Before installing make sure that your phone is rooted
Screenshots:
Video:
ChangeLog:
Known Issues:
Tested On:
Thanks To:
Download:
Source Code (Sorry , too lazy for github fttb):
For Rom Developers:
It seems that default cwm format is messing up (due to ext4 file system) , Please use (edify) the following script to format the data and cache partition (or System)
Edify (To Format System):
Current Status: Operational
Installation/Update Instructions:
Before installing make sure that your phone is rooted
Code:
Backup your existing recovery:
1) [COLOR="Magenta"]cat /dev/block/mmcblk0p13 > /sdcard/recovery-backup.img[/COLOR]
Flash the new recovery by:
1) Download the bc64-recovery.rar and extract it
2) Copy the extracted bc64-recovery.img to your /sdcard
3) via terminal emulator or adb shell execute:
[COLOR="Magenta"]
su
cd /sdcard
cat bc64-recovery.img > /dev/block/mmcblk0p13[/COLOR]
All Done!
Now to Boot into recovery , press the vol down+pwr button , when it asks you to factory reset , tap twice the pwr button to confirm (dont worry it wont format your device)
Screenshots:
Video:
Code:
http://www.youtube.com/watch?v=okr8PWeQ30E
ChangeLog:
Code:
v0.2 B20120124
Changes:
* Added postrecoveryboot.sh to clear out boot command
* Added Partition/fs Utils (useful for rom dev in formatting/checking ext4 fs)
-e2fsck_static
-mke2fs_static
-resize2fs_static
-tune2fs_static
v0.1 B20120120 (Initial Release)
Known Issues:
Code:
wrong timestamps
Code:
Atnt LG Nitro HD (P930)
LG Optimus LTE (SU640)
Code:
schwin97
V@no
Malnilion
repherb
aquariuz23
gte460z
and everyone else who contributed to this thread :P
Code:
http://www.mediafire.com/?mnf53sxmp5aifd9
Source Code (Sorry , too lazy for github fttb):
Code:
http://www.mediafire.com/?f27d8j8d7mc8qi8
For Rom Developers:
It seems that default cwm format is messing up (due to ext4 file system) , Please use (edify) the following script to format the data and cache partition (or System)
Code:
#Format Data
/sbin/mke2fs_static -t ext4 -b 4096 /dev/block/mmcblk0p30
#Format Cache
/sbin/mke2fs_static -t ext4 -b 4096 /dev/block/mmcblk0p28
# After Format Verify the FIle System
/sbin/e2fsck_static -y /dev/block/mmcblk0p30
/sbin/e2fsck_static -y /dev/block/mmcblk0p28
Edify (To Format System):
Code:
run_program("/sbin/mke2fs_static", "-t" , "ext4" "/dev/block/mmcblk0p27");
AND
run_program("/sbin/e2fsck_static", "-y", "/dev/block/mmcblk0p27");
Last edited: