Thanks Denys Vlasenko/chris41g for busybox, ChainsDD for su, Steady Hawkin/Calkulin for FD02+CWM-Rogue(repack),
qbking77 for video, id10terror for Odin 1-click suggestions, mavd5831, RainMotorSports for mirror(s)
This One-Click ODIN contains the STOCK FF09 Modem/Kernel/ROM for the E4GT.
The ONLY change was the addition of ROOT to the ROM. NOTHING else was changed. If you made no other changes, you WOULD be able to install an OTA patch update (based off of FF09) on top of this w/o issues.
This will NOT trigger the Yellow Triangle NOR will it increment the ODIN flash count.
This does NOT have the issue with the USB jig being disabled.
This is equivalent to using the Auto Root Package on a stock ROM. In fact, if you used that package to UNROOT (Option B) this ROM then it would become 100% stock. After flashing this all functions of that package will be functional.
There are two versions provided, a FULL Restore that resets your whole phone, similar to a factory restore, and a No Data Restore, which is the same, except it preserves your User Data. The NoData version is only suggested if you are upgrading or remaining at the same version.
Instructions - Video by qbking77 [ODIN One-Click / Install CWM]
0) Backup anything important and Disable any PINs
This process will restore you to factory software. All your Android data will be reset.
To be safe, it is best to archive your backup off your phone, ie on your PC or dropbox.
Note #1: Please DISABLE any PIN code you may have created to protect your phone. As a security measure, after the flash, Android will ask you for your PIN, if you have one enabled. It is simpler to have no PIN active. If you forgot your PIN then, after the factory restore, just enter the wrong PIN a few times and it will warn you. Enter the wrong PIN again and it will reset the filesystem.
1) Install Samsung USB/Android drivers (if necessary) [USB/Android]
2) Download the FF09 full restore One-Click self-extractor
SPH-D710.FF09_CL663858_ROOTED-oc-sfx.exe [Mirror1 / Mirror2] (RESET user data)
[MD5: 50614e315f40c6d52577cbe085e0543d / Size: 311,584,972]
SPH-D710.FF09_CL663858_ROOTED_NODATA-oc-sfx.exe [Mirror1 / Mirror2] (PRESERVE user data - do NOT use if downgrading versions)
[MD5: b226049eaca9784128bf580e85ef177d / Size: 310,599,824]
Mac/Linux - Install 7-zip, then use it to unpack the individual ODIN components in Reference Section B (below). If Heimdall fails flashing all 3 files together, try doing them individually. Skip the remaining instructions that are windows specific (steps 3, 4, 6).
Android - Install ZArchiver, then use it to unpack the ODIN OneClick 7zip self-extractor file in this section (long press *-oc-sfx.exe, Open as archive, Odin-OC, select *-OneClick.exe, Extract). Use Mobile ODIN to Open File the resulting *-OneClick.exe file. Mobile ODIN issue - modem might not flash consistently. Skip the remaining instructions that are windows ODIN specific (steps 3, 4, 5, 6).
3) Extract the package
double-click on the self-extractor file, specify the directory to extract to (instructions assume C:\)
4) Start ODIN One-Click
Navigate to C:\Odin-OC
Full: Double-click on SPH-D710.FF09_CL663858_ROOTED-OneClick.exe
NoData: Double-click on SPH-D710.FF09_CL663858_ROOTED_NODATA-OneClick.exe
Note #1: On Vista or newer, you may need to right-click on the file and Run as Administrator.
5) Place phone in ODIN download mode
Method #1 Power down phone Wait for capacitative button lights to turn off Simultaneously Press and Hold [Power] [VolDn] until confirmation screen appears Press [VolUp] to enter Download mode
Method #2 adb reboot download
Connect USB cable to PC if not already connected ODIN should show yellow COM port in 2nd column
6) Start ODIN flash process
7) Complete - PASS!
When complete you should see a screen similar to what is shown at top of post
Phone will automatically reboot
Status should change to green PASS!
Boot process will be slightly longer than usual during which time you'll see the 4G logo screen.
If you want CWM use Option D in the Auto Root Package to install FF09+CWM-agat (you are already rooted so Option A is not necessary)
If you need to clear NVRAM/Sprint data login info, perform a ##72786# reset from the Dialer and enter MSL.
Type getprop ril.MSL in adb shell or terminal to retrieve your MSL.
For NoData install:
- If you are getting random force closes, wipe cache/dalvik-cache
- If you have troubles with Android Market, clear data from
- If you have troubles booting into Android, perform factory reset in ICS using the ODIN OneClick Factory Reset tool. Do NOT perform factory resets using stock recovery or privacy->reset, at least until you read about the EMMC superbrick/lockup bug and understand what the trigger points are and what you are exposing yourself to.