Thx for your reply. I've used Bootmenu overclocking, but from what nofrillscpu tells, IT does not work. Still 1000 max, still ondemand.
Thx for your reply. I've used Bootmenu overclocking, but from what nofrillscpu tells, IT does not work. Still 1000 max, still ondemand.
Some people are on custom ROMs so long, that they forget how the stock ones look like. For more info on how to change battery indicator see this thread.
INZANEDUD, will you please give your feedback on downgrade? It's always good to know
Downgrade? I am still in bl6 ... anyway there are several post about rooting gingerbread bl7 like this.
Bad news
May be the kernel? Damn it was my favourite method of overclock....what about setvsel or defy overclock or milestone overclock??
May be the kernel? Damn it was my favourite method of overclock....what about setvsel or defy overclock or milestone overclock??
I tried with 4.5.3-109_DPP-11 and 4.5.2-109-DHT-22, both from MS2Ginger thread.
The result was the same, overclock didn't work.
The same issue happend to me with MS2Ginger 3.0 and the solution was update Bootmenu with the version included in MS2Ginger 4.0.
I tried updating Bootmenu with this rom, but the issue still here.
The result was the same, overclock didn't work.
The same issue happend to me with MS2Ginger 3.0 and the solution was update Bootmenu with the version included in MS2Ginger 4.0.
I tried updating Bootmenu with this rom, but the issue still here.
Every time you flash a new rom, you need to recalibrate the battery. Read somewhere that if you take out the battery for 3 to 5 minutes and put it back in should do the job. Wipe battery stats in CWM bootmenu. Keep in mind that this battery indicator goes from 0 to 20 by 5, and from 20 to 100 by 10%. To calibrate the battery you can also use 'battery calibration' app from the playstore.
Have you done that ?
Extract the downloaded file to the SD card at: /sdcard/clockworkmod/backup
I encountered the same behavior because i had forgotten to extract the zip. You should have a directory /sdcard/clockworkmod/backup/PVL-StockPlus-v2/*
Thank You for replies, it was a silly mistake on my part, did not extract the contents in backup, instead copied it after extracting which created two folders in "backup/PVL-StockPlus-v2/PVL-StockPlus-v2".
Hi prasannavl,
- for those who use GGLRom (green lens), you can tell us how to activate Volume Buttons Wake Support and Deep Sleep Support?
- finally, I think it's the same version of ROM.
- your ROM has toggle bar widgets (like in ms2ginger)?
I really appreciate your answer....
- for those who use GGLRom (green lens), you can tell us how to activate Volume Buttons Wake Support and Deep Sleep Support?
- finally, I think it's the same version of ROM.
- your ROM has toggle bar widgets (like in ms2ginger)?
I really appreciate your answer....
Hi prasannavl,
- for those who use GGLRom (green lens), you can tell us how to activate Volume Buttons Wake Support and Deep Sleep Support?
- finally, I think it's the same version of ROM.
- your ROM has toggle bar widgets (like in ms2ginger)?
I really appreciate your answer....
- To add Deep sleep support manually is easier said than done. For example you have here an explanation of how to add a reboot button.
- yes, this ROM is based on the same version of stock rom.
- You can download fully customizable notification toggle app from the Google playstore
Heelllo...
Hmmm..how to edit light softbutton because overbright I need light softbutton in pvl v1 help me please..
Hmmm..how to edit light softbutton because overbright I need light softbutton in pvl v1 help me please..
In v1, you need to edit the init.d scripts inside /etc/init.d/XXbacklight to modify the brightness.
In v2, you can simply modify the value in /system/build.prop.
In v2, you can simply modify the value in /system/build.prop.
ok thank you prasannavl
but I am confused what to edit in the section where? .. for setting softkey lamp light in order not to be too bright? ..
from CM9
Hi prasannavl,
I've got CM9 on my Defy+,do I have to go back to stock, root and then flash it with cwm? Can I flash it over a CM9 otherwise?
Thx
Hi prasannavl,
I've got CM9 on my Defy+,do I have to go back to stock, root and then flash it with cwm? Can I flash it over a CM9 otherwise?
Thx
Similar threads
- Poll
Top Liked Posts
-
There are no posts matching your filters.
-
30So, after hovering over CM nightlies for as long as I can remember, I guess, I've reached a point where I want things to just work. And DFP-231, for the first time pleasantly surprised me! So, sticking as close to stock as possible while having all the goodies, here - PVL-StockPlus.
Credits to: walter79, iaio72, spear1403, tgzw, Quarx, Simondo, ein1002, santimanuel, and all others involved in this forum as some of their individual contributions elsewhere may be included
Base: DEFYPLUS_U3_4.5.1-134_DFP-231-AsiaRetail
Languages: en_US, en_GB, fr_FR, it_IT, es_ES, es_US, de_DE, de_AT, nl_NL, zh_CN, vi_VN, tl_PH, th_TH, id_ID.
Compatible Devices: Motorola Defy Plus (MB526), Motorola Defy (MB525 - Bayer camera module only, devices with green lens is not supported)
Core Additions:
Rooted.
Added Busybox.
Added latest Bootmenu.
Added 720p video recording and playback.
Added panorama mode.
Added init.d support
Added official Motorola's full version of QuickOffice instead of Lite.
Automatic zip-align on boot.
Added ramscript.
Enabled Multi-touch support upto 10 points. (Can be edited in /system/build.prop)
Adjustable Button Backlight (Can be edited in /system/build.prop)
Added Deep Sleep support. (Extends your battery life significantly)
Volume Buttons Wake Support.
Dalvik Tweaks.
Fully De-Odexed.
UI Changes:
Full black status bar.
Full ICS animations.
Roboto (ICS) Fonts.
Simple circle battery icon.
A much simpler and more elegant loading icon.
System Application Changes:
Added Google Play Music.
Removed ZinioReader. (Download it from Market if you'd like)
Removed CardioTrainer Stub.
Removed MotoLounge Stub.
Removed HelpCentre Stub.
Ramscript Configurations:
minfree - 1536,2048,4096,10240,14800,20360
swapiness - 20
vfs_cache_pressure - 70
dirty_expire_centisecs - 3000
dirty_writeback_centisecs - 500
dirty_ratio - 15
dirty_background_ratio - 3
Download Links:
Version 2: PVL-StockPlus-v2.zip [194 MB]
Version 1: PVL-StockPlus-v1.zip [191 MB]
Note: If you're installing it on a Defy (not Defy+), you need to only restore "system" using "Advanced Restore", and flash 4.5.3-109-DHT Kernel from here - http://ge.tt/969Z8xC/v/3.
Updates:
Note: All the updates below are already integrated into Version 2. You don't have to download any of these below.
ResponsivenessUpdate.zip [156Kb] (Will work on any ROM with init.d support - Tweaks to ramscript)
MP4VideoUpdate.zip [158Kb] - VGA+ resolution videos including 720p now use MP4 containers. (Info: 720p uses generic MPEG4 Part-2 encoding while others use H264 (Part-10 AVC) as frame-rate with 720p using H264 is too low, although it provides better quality. Edit /system/build.prop if you wish to change that.)
Screenshots: http://www.prasannavl.com/2012/04/pvl-stockplus-custom-rom-for-motorola_05.html
How to Install:
1. Root your Phone and Install Bootmenu (SndInitDefy_2.0.apk)
2. Extract the downloaded file to the SD card at: /sdcard/clockworkmod/backup
3. Copy all the update zip files, if any, anywhere into your SD card.
4. Reboot
5. Boot into 2nd-init (Volume-Down on Blue LED)
6. Go to "Recovery" -> "Custom Recovery" -> "Backup and Restore" -> "Restore" -> "PVL-StockPlus-v1"
7. To install the updates, if any, choose "Install from zip from sdcard" -> Select all the update zips one by one and install.
8. Wipe data (Optional but recommended) and cache (Strictly required).
9. Reboot
If you're on a Green Lens Defy, you should probably wait for walter79's MSGinger. While I intend to focus only on the Defy Plus and Red Lens Defy, walter's ROMs provide a wide range of compatibility.
Change Log:
Version 2 - 18th April 2012:
Fix: zipalign executable missing.
Fix: Panorama mode build.prop typo (Thanks to walter79)
Number of Multi-touch points can be edited in /system/build.prop
Button backlight can now be edited in /system/build.prop
Added Deep Sleep support. (Extends your battery life significantly)
Volume Buttons Wake Support.
Dalvik Tweaks.
Fully De-Odexed.
Added Google Play Music.
Integrated all of v1's updates.
More build.prop tweaks.
For those who share my taste and prefer simplicity, enjoy. Others, no one's stoping you either.
PVL4Hi,
could not install ...MD5 mismatch in CWM.
the same happened to me!
I can't restore this nandroid... md5 mismatch!
Please reupload it again
Same here
Correctly unzipped with 7zip.
the md5 in nandroid.md5 is actually different from the system.ext3.tar one and from any other file in the directory.
Damn! Terribly Sorry guys! I will reupoload it! Meanwhile, you don't have to redownload it again. Just open the nandroid.md5 in a text editor and replace it the line with md5 of "system.tar.ext3" with
Code:a1dd5d0b16b56d94b5cb77f213dcf594 ./system.ext3.tar
Save it, and now it should work!
Sorry about this. Will reupload it soon.3v2 Released
Couldn't upload the file for over 3 days due to internet connectivity issues. Finally fixed and v2 released.
Version 2 - 17th April 2012 :
Fix: zipalign executable missing.
Fix: Panorama mode build.prop typo (Thanks to walter79)
Number of Multi-touch points can be edited in /system/build.prop
Button backlight can now be edited in /system/build.prop
Added Deep Sleep support. (Extends your battery life significantly)
Volume Buttons Wake Support.
Dalvik Tweaks.
Fully De-Odexed.
Updated Stock Camera to Droid-Razr Camera.
Added Google Play Music.
Integrated all of v1's updates.
More build.prop tweaks.3MP4 Video Recording Update.
VGA+ resolution videos including 720p now use MP4 containers. (Info: 720p uses generic MPEG4 Part-2 encoding while others use H264 (Part-10 AVC) as frame-rate with 720p using H264 is too low, although it provides better quality. Edit /system/build.prop if you wish to change that.)
