Hereby, I present you GingerReal.
The development of this ROM, is 100% aimed on stability and speed, which we have proven. Current install base over 500.000 smartphones around the globe!
Flash this ROM and you will never go to another
See this link >> http://gingerreal.info/index.php/topic,168.msg2554.html#msg2554
-Based on JVT android 2.3.5
-Semaphore kernel 1.8.2
-Jupa HSS R1.0.0
-GR2 bootanimation
-GR2 tweak configuration
-GR2 Theme
-Improved 3d graphics
-Hacked host file
-Big APN list
-Full root 3.0.6
-Full deodex
-Full zipalaigned
-Wipe detection
-Custom modem/kernel detection
Read all GingerReal2 features here
Prerequisites:
- Make sure your 3 button combination works
- Flash with full battery, or atleast at 75%
- For your own safety, always disable lagfix
- Back-up all your apps, messages etc. All data will be wiped
Step 1
Download je base rom here
When GR is based on JVR then flash JVR is it based on JVS then flash JVS and so on
Step 2
- Extract you rom base
Pasword = samfirmware.com
- Open Odin v1.82
- Tick Re-Partition on and load the following files in Odin
PIT = s1_odin_20100512.pit
PDA = CODE.tar (it is the one with code in the name)
PHONE = MODEM.tar (it is the one with modem/phone in the name)
CSC = CSC.tar (it is the one with csc in the name)
Boot your phone into Download Mode (VOL DOWN + HOME + POWER)
Connect your phone and wait for Odin to say 'Added!!'
This will take approximately 5 to 10 minutes
After your phone booted, close Odin
Step 3
Let your phone start up this may take a while
Congratulations you are now on Android your rom base
Step 4
Download a semaphore kernel for your rom base
Start up odin again
PDA = Semaphore_kernel_xxxxxxxxx.tar
Connect your phone when it is in download mode and click on start
Now let your phone boot fully again
Update to latest GingerReal
Note1: GingerReal2 is using WipeDetection when you are not on GingerReal2 the rom will wipe!
Note2: GingerReal2 is using custom modem/kernel detection. When you put your own zImage/modem.bin on your sdcard these will be installed otherwise the ones that comes with GingerReal
1. Download the latest GingerReal and put it on your SD-card
2. Boot in recovery
3. Choose for "install zip from SD" then "choose zip from sd"
5. Apply the GingerReal-X.X-XXXX.zip
6. Wait till it is done and reboot your device after that
7. Wait till it is fully booted
Congratulation you are now on the latest GingerReal
Video Guide by totallydubbed
SGS-GR2-R1.1.9-update.zip << must be on R1.1.0 to apply this update
SGS-GR2-R1.1.0-Signed.zip << WILL WIPE
SGS-GR2-R1.0.0
Goodies and stuff can be found here
Arabic Patches
The development of this ROM, is 100% aimed on stability and speed, which we have proven. Current install base over 500.000 smartphones around the globe!
Flash this ROM and you will never go to another
* Flashing knowledge is necessary to keep yourself out of trouble
* Read the installation procedure before posting any questions/issues!
* I am not responsible for your bricked or not working devices
* PLEASE BE PATIENT AND DO NOT ASK FOR ETA. UPDATES WILL COME WHEN THEY ARE READY!
* You may always leave feedback and post bugs
See this link >> http://gingerreal.info/index.php/topic,168.msg2554.html#msg2554
-Based on JVT android 2.3.5
-Semaphore kernel 1.8.2
-Jupa HSS R1.0.0
-GR2 bootanimation
-GR2 tweak configuration
-GR2 Theme
-Improved 3d graphics
-Hacked host file
-Big APN list
-Full root 3.0.6
-Full deodex
-Full zipalaigned
-Wipe detection
-Custom modem/kernel detection
Read all GingerReal2 features here
Prerequisites:
- Make sure your 3 button combination works
- Flash with full battery, or atleast at 75%
- For your own safety, always disable lagfix
- Back-up all your apps, messages etc. All data will be wiped
Step 1
Download je base rom here
When GR is based on JVR then flash JVR is it based on JVS then flash JVS and so on
Step 2
- Extract you rom base
Pasword = samfirmware.com
- Open Odin v1.82
- Tick Re-Partition on and load the following files in Odin
PIT = s1_odin_20100512.pit
PDA = CODE.tar (it is the one with code in the name)
PHONE = MODEM.tar (it is the one with modem/phone in the name)
CSC = CSC.tar (it is the one with csc in the name)
Boot your phone into Download Mode (VOL DOWN + HOME + POWER)
Connect your phone and wait for Odin to say 'Added!!'
This will take approximately 5 to 10 minutes
After your phone booted, close Odin
Step 3
Let your phone start up this may take a while
Congratulations you are now on Android your rom base
Step 4
Download a semaphore kernel for your rom base
Start up odin again
PDA = Semaphore_kernel_xxxxxxxxx.tar
Connect your phone when it is in download mode and click on start
Now let your phone boot fully again
Update to latest GingerReal
Note1: GingerReal2 is using WipeDetection when you are not on GingerReal2 the rom will wipe!
Note2: GingerReal2 is using custom modem/kernel detection. When you put your own zImage/modem.bin on your sdcard these will be installed otherwise the ones that comes with GingerReal
1. Download the latest GingerReal and put it on your SD-card
2. Boot in recovery
3. Choose for "install zip from SD" then "choose zip from sd"
5. Apply the GingerReal-X.X-XXXX.zip
6. Wait till it is done and reboot your device after that
7. Wait till it is fully booted
Congratulation you are now on the latest GingerReal
Video Guide by totallydubbed
SGS-GR2-R1.1.9-update.zip << must be on R1.1.0 to apply this update
SGS-GR2-R1.1.0-Signed.zip << WILL WIPE
SGS-GR2-R1.0.0
Goodies and stuff can be found here
Arabic Patches
Last edited: