this project was started long time ago, but then, during luck of free time for this project, it was suspended.
Now, because it seems very hard to improve it more, we make decision to release developed stuffs. Also more interesting projects now appear
This release contains drivers designed to allow connect different USB devices to HTC LEO (HTC HD2)
Those drivers designed for Windows Mobile 6.5 OS and they were successfully tested on 3.14 ROM. Other ROMs are not tested.
For using USB host ability you need use special cable or self-powered USB hub.
More information can be found here
This release supports HID and MassStorage profiles.
You can connect UsB Mouse, USB Keyboard, USB Stick, USB Hard Disk.
Of course, you need enough external power for devices.
Please remember, this is some kind of demonstration,
this implementation sometimes isn't stable and you can have issues during usage.
PLEASE MAKE DATA BACKUP BEFORE INSTALLING!
1. Install CotullaCert.cab
2. Install DFT_LEO_USBH_WM65.CAB.
1. Programs -> USBH Switch
2. Disconnect from PC.
3. Press "Switch to Host" button.
4. Connect host device.
5. After some time it should be detected.
6. You can try to use it.
7. After usage you need reset your device to go back USB client mode.
NOTE: It's not recommended to connect device to PC during USB Host mode active!
This product is free to use at your own risk. We take no
responsibility for any conflict, fault, or damage caused by
this unlocking procedure. No warranties, implied or otherwise, are given if you agree to use this product.
No problems were found while testing this product on several different devices, your experience may vary.
Use of the Product for commercial purposes is strictly prohibited and to prohibit the use by xda.cn Forum.
USBH Switch program:
How it can looks in the real :
on picture you see a USB hub (without external power), a self made Y cable, LEO1024, USB mouse, USB Memory Stick and a bunch of cables.
I can see data on USB stick inside file explorer and can control device by mouse (cursor invisible by default). White cable go to USB male which used as VBUS 5V source.