Is your DEFY / DEFY+ bricked??
FLASHING WITH STOCK ROM
1.Download and install usb driver from here http://www.motorola.com/staticfiles/...iver_5.5.0.exe
2.Download the sbf file from here
DEFY:http://sbf.droid-developers.org/umts_jordan/list.php (Based on your choice)
DEFY+: http://sbf.droid-developers.org/umts...nplus/list.php (Based on your choice)
3.Download RSD Lite from here http://www.multiupload.nl/8KGA2FPSMI
4.Remove your battery.
5.Press and hold power button and vol + button.
6.Put the battery back holding those buttons.
7.Now your phone will start and a blank screen will appear, now release those buttons. It will show the Bootloader.
8.Connect your phone via USB,now bootloader should display Transfer Mode:USB.(Drivers might install in your PC.If it install,wait till installation completes).
9.Open RSD Lite as administrator.
10.Hit show devies. Now your device must be displayed(If not drivers were not installed. Check for it.)
11.Now choose the sbf file.
12.Hit start. Be patient it will take some time.
13.Sometimes your phone reboots automatically and result column will say pass. If that doesn't happen,it will ask you to reboot manaully and your phone will be stuck in MOTO logo.
- Now remove your USB cable and remove battery. Hold power button and vol + button, you will get that screen.
- Now connect usb, now it result should say pass.
- Press the power button and start the phone. First boot will take some time (Min of 10 minutes or more).
If you are still stuck in bootloop
1.Remove your battery.
2.Hold the power button and vol - and put the battery.
3.You will enter into Motorola stock recovery.
4.Give factory rest and wipe cache.
5.Reboot your phone. This time it should work, else one again flash the sbf using RSD Lite.
ANY BROKEN LINKS!! PLEASE REPORT.