Try with UPDATE.APP from step 2 from official GingerBread ROM.
Sent from my U8800pro using Tapatalk 2
Official ICS 4.0.3 V100R001C00B928 with unlock pink screen
- Thread starter pikachukaki
- Start date
-
- Tags
- development
Try with UPDATE.APP from step 2 from official GingerBread ROM.
Sent from my U8800pro using Tapatalk 2
hey people. am getting a problem updating from gb to ics. i have cm7.2 gkalenis version. i am flashing ics step1. it just keeps on the unpacking screen and nothing happens. i can confirm the b865 gb installed by service centre had unlocked bootloader and i had installed twrp. i have tried flashing step2 or step1 both with or without battery. but it just stays in the unpacking screen the pink bar doesnt come like nothing happens. any idea what could be wrong? or what should i do here?
Flash a official GB once again. I undergone the same situation when I got my phone from Service center after changing the mother board. I flash the GB (downloaded from the Huawei official site), then ICS. Mine is working properly now.
U flashed step2 or all. Thanks atlast got one confirmation from an indian
-Rik[Rittik]
There is only step1 in GB zip. I downloaded from Huawei official site.
Unfortunately this does not work for me.
I tried to flash the bootloader to unlock the pink screen but it fails any way I try it (with battery, with just the USB cable)
the error in sd_update.log is :
I formatted the SD card as well just in case that was the problem still no joy.
Is there another way to replace the bootloader ?
I tried to flash the bootloader to unlock the pink screen but it fails any way I try it (with battery, with just the USB cable)
the error in sd_update.log is :
I formatted the SD card as well just in case that was the problem still no joy.
Is there another way to replace the bootloader ?
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
26
Changelog:
1.fix bug about atmel touch panel;
2.fix bug that the backlight wont auto turn on when calling;
3.increase the available memory of the applications;
4.Modify the SD card hot swap program，user can change the default storage location;
5.shorten the boot time when disable fast boot.
Rom:http://www.huaweidevice.com/worldwi...=toDownloadFile&flay=software&softid=NDY1NTY=
Patched services.jar: http://www.mediafire.com/?s5oi53ygryooxvg
Build.prop with tweaks: http://www.mediafire.com/?y8xv6aff0fozx3v
Unlock fps (paste it on system/etc give all 9 permissions): http://www.mediafire.com/?yybxj2yy18xedqb
Volume rocker: http://www.mediafire.com/?bgpin1yp77po9p9
querty.kl and Generic.kl move to system/usr/keylayout/ with overwrite check permissions rw-r--r--
android.policy.jar move to system/ make permissions rw-r--r-- and then move to system/framework/ with overwrite.
Fastly restart phone. First boot will took very long ~2min, but finaly MOD works
Multilanguage keyboard: http://pikachukaki.googlecode.com/files/LatinIME.apk
ROOT
Download this : http://pikachukaki.googlecode.com/files/Root_u8800pro.rar
Extract the exe on your desktop
Connect your phone and enable usb debugging then press the 1st button on the exe
Wait for the commands to finish and check if you have SuperUser on your apps!!
Installation
Ok i say there is a pdf inside the zip but noone reads it..so how to install the rom
1)You have to have 2.3 rom...any rom official,custom,cm,miui,mine,kalos anything
1a)If you have froyo update to 2.3 find the post here on xda dont ask here how to update to 2.3)
2)make a folder on your sdcard and sdcard only named "dload"
3)Inside dload paste update.app from zip's step1 folder
4)Close the phone-remove the battery-insert the battery and hold both volume keys and press power until you see the huawei logo
4a)If the installation starts and gives you a fail do the same as above and press the keys for less seconds
5)Wait for the installation to finish..step1 and step3 will make 10-20seconds to install step2 will make 10minutes
5a)If and only if after installing step1 phone boots on cwm format data/make factory reset and reboot your phone
6)Wait to boot on your rom no rom changed until now
7)Now on your dload folder delete the update.app and paste update.app from zip's step2
8)Close the phone remove the battery and boot up with both volumes and power button,wait to finish..if your red light in headphone starts flashing quick you have problem..take off the battery and try again
9)After step2 finished wait for it to boot..normaly it will take you to stock recovery and make some wipes,then it will boot to ics!
10)After finishing login to your gmail account and everything loads normaly remove from dload update.app and paste step3 update.app
11)Close the phone remove tha battery and power the phone with both volumes and power button
12)Wait for it to finish this is quick like step1
13)There is a posibility that this step will take you to stock recovery too wait for the wipes to be done and if it stack at OK remove tha battery and insert it again
14)The phone will boot up normaly
15)Now you have all ics functions working!!GL so don't ask again how to install!!thx!!
Unlock the pink screen
1)Download the B928 Unlock the pink screen zip and flash it just like the steps above
2)After finishing flashing the unlock remove your sdcard and boot the phone to bootloader mode (pink screen) with Volume +/- pressed and power until you see a pink screen in the phone
3)Connect the phone to the USB cable and open your explorer on your pc
4)You will see a removable disk with the folder "Image" inside
5)Download the CWM recovery (the new by geno is in chinese for now) rename it to recovery.img and replace the existing recovery.img in the image folder
6)Disconect the usb cable remove the battery and boot your phone normally
If you are like me that after flashing step2 try to flash unlock and get the pink screen backup your sdcard to your pc and have inside only dload folder nothing more!!or i found this now..use the internal sd..
To downgrade to 2.3.5 you need to download 2.3.5 rom and flash only Step2 update.app!!
-------------
Known bug list:
1)The 4 keys after a while stop lighting they can be fixed if you restart but after 2-3 restarts they stop working at all
2)The phone model shows as U8800 not U8800+ or U8800pro although this is a U8800PRO rom not for non pro phone
3)Some users complaining about random reboots
Non bugs:
1)Low Ram...ics is newer and better that GB so it uses more ram than GB nothing we can do at least for now
2)No image folder on pink screen,as i say at the top of the post bootloader aka pink screen is locked so we can't see our image folder
3)After changing to CWM you will get a notice that says that your recovery.img has wrong signature thats the results of the post above bootloader is locked!!
4)This rom is stock..and as you remember if your using at all your stock GB roms they suck...so don't compare it with kalo's or any other rom as soon as we are be able to unlock the bootloader we are be able to took the rom and make it as stable and fast as we can..and also to make CM9 and MIUI v4!9Thread cleaned a bit. Please respect the forum rules, and keep the discussion development related. Thanks!
Instead of continue a endless discussion not development related, please use the report button. Anonymous report will be generated and this will improve for sure this forum. Thanks!
6
He also says " To downgrade to 2.3.5 you need to download 2.3.5 rom and flash only Step2 update"
You have to read more carefully and learn the difference between a rom and a firmware.
Pika is right, you can't flash any other rom via custom recovery only a firmware to upgrate/downgrade.
Pika was right once more about the New update.
I don't understand what is your problem with him, he is trying to help and he has nothing to gain from this.
You should apreciate his effort even if he makes some mistakes, after all we all make some mistakes.
Sent from my u8800pro using Tapatalk6
and what? I have Nokia 3310, all extras work. 128 kb free ram everytime *sarkazm* We are all discuss ICS rom in here. Go back.
people, our team from 4pda dot ru made cwm rom ICS B926, but he is not full work, does not work gsm radio module and imei is empty. Faithlezz put a link to rom and instructions in next post. Thanks.5Pika, you wrote in first post "Be aware that after updating to B927 you wont be able to flash any other rom or be able to change boot.img and recovery.img!There is a new protection system that wont let us change anything from pink screen that also didn't work at all!!So be aware!"
But in the official instructions have the opportunity to downgrade:
Android 4.0 to Android2.3 swap-back operations
Back up your personal data before upgrade, the upgrade process
will wipe all user data.
（1） Download the officially released Android2.3update patch with your pc.
（2） Follow the officially released U8800pro 2.3 version update instructions to
update the phone from Android 4.0 to Android 2.3
Why do you confuse people? or you know better than the manufacturer??
