Remove All Ads from XDA

[PRO][KERNEL] LuPuSv16 [LINARO 4.7.3][STOCK ICS][UPDATED 19-06-13]

3,234 posts
Thanks Meter: 14,521
By wedgess, Retired Forum Moderator / Recognized Developer on 11th August 2012, 02:51 PM
Post Reply Email Thread
LuPuS Kernel Stock

Well seen as WIFI is FIXED I may as well clean this up a bit and make it look better.
I do not have a PRO so you guys can help tell me what else works/doesnt work.
Thanks to Dympy for testing and motivation without him and also Dexxmor everyone wouldn't have
this kernel and me of course


#include std.h
* Your warranty is now void.. LOL I guess you knew it already.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, you getting dumped or you getting fired because your phone*
* bootloops and alarm does not go off. Please do some research if you have any *
* concerns about features included in my kernel before using it! YOU and only*
* YOU are choosing to make these modifications.

You have a question post it in the thread,
Instead of Pm'ing me, as other users may
experience your problems

Whats inside this Kernel List of governors / Io-Schedulers ect....

Added Io-schedulers --
  • - Noop
    - Anticipatory
    - Deadline
    - CFQ
    - BFQ
    - SIO
    - ZEN

Added Governors --
  • - lagfree
    - brazillianwax
    - smoothass
    - scary
    - savagedzen
    - smartass
    - smartassv2
    - smartassH3
    - interactivex
    - minmax
    - powersave
    - performance
    - conservative
    - ondemand
    - interactive
    - userspace
    Lulzactive - Thanks to Tegrak
    Based on Interactive and Smartass. When workload is greater than or equal to 60%, the governor scales up
    CPU to next higher step. When workload is less than 60%, governor scales down CPU to next lower step.
    When screen is off, frequency is locked to global scaling minimum frequency

    Virtuous is a modded smartassV2 which gives even more battery time then smartassV2

    Intellidemand - Thanks to faux123
    This is an intelligent ondemand that enters browsing mode to limit max frequency when GPU is idling,
    and (exits browsing mode) behaves like ondemand when GPU is busy; to deliver performance for gaming and such.
    Intellidemand does not jump to highest frequency when screen is off.

    Lazy - Thanks to Ezekeel
    The Idea here is to eliminate any instabilities caused by fast frequency switching by ondemand.
    Lazy governor polls more often than ondemand, but changes frequency only after completing min_time_state
    on a step overriding sampling interval.
    Lazy also has a screenoff_maxfreq parameter which when enabled will cause the governor to always
    select the maximum frequency while the screen is off.

    Basically an ondemand with suspend/wake profiles. This governor is supposed to be a battery friendly ondemand. When screen is off, max frequency is capped at 500 mhz. Even though ondemand is the default governor in many kernel and is considered safe/stable, the support for ondemand/ondemandX depends on CPU capability to do fast frequency switching which are very low latency frequency transitions. I have read somewhere that the performance of ondemand/ondemandx were significantly varying for different i/o schedulers. This is not true for most of the other governors. I personally feel ondemand/ondemandx goes best with SIO I/O scheduler.

    Is a conservative-based governor. The tunables (such as the thresholds and sampling rate) were changed so the governor behaves more like the performance one, at the cost of battery as the scaling is very aggressive.

    To 'experience' Lionheart using conservative, try these tweaks:
    sampling_rate:10000 or 20000 or 50000, whichever you feel is safer. (transition latency of the CPU is something below 10ms/10,000uS hence using 10,000 might not be safe).
    Lionheart goes well with deadline i/o scheduler. When it comes to smoothness (not considering battery drain), a tuned conservative delivers more as compared to a tuned ondemand.

    BadAss Governor:
    Badass removes all of this "fast peaking" to the max frequency. Badass will also take the gpu load into consideration. If the gpu is moderately busy it will bypass the above check and clock the cpu with 1024Mhz. If the gpu is crushed under load, badass will lift the restrictions to the cpu.

    Superbad -
    A "superbad" super smooth rendition of a highly optimized "smartass" governor!

    Darkside -
    A "slightly more agressive smart" optimized governor!

What else-----
  • -SLQB - (SLAB allocator with Queue)-(both)
    This memory allocator is designed for small number of CPUs system (such as desktop or smart phone devices). This allocator is design to be simple and it is optimized for using order-0 pages as much as possible (order-0 pages are the simplest therefore quickest type of memory in a Linux system to allocate).

Show your support for the kernel and my work by putting this in your signature, its only a quick one I done up with my limited time


A big thanks to -
Sony - sources
tempest918 - For the New Logo
Dymy - Testing
Dexxmor - Testing
DooMLoRD - for patches and all the work he has done for Xpeeria's
FXP Team
Anyone missing please PM me

Downloads in post 2

Kernel source --- -branch master

CWM source -- -b lupus-cwm
The Following 174 Users Say Thank You to wedgess For This Useful Post: [ View ]
11th August 2012, 02:52 PM |#2  
wedgess's Avatar
OP Retired Forum Moderator / Recognized Developer
Flag Dublin, Ireland
Thanks Meter: 14,521
Donate to Me
Changelog -
Previous Releases
- Added Cleancache - Supports ext 2,3 and 4 - Updated zRam - Lzo compression/decompression speed has doubled on average. - Init.d support - Fudgeswap - And much more :D[/LIST] What's been added in v5
  • ~2 Way call recording ~ Ext4 support ~ More battery friendly (so far so good) ~ Increased WiFi signal strength ~ Free’d Ram ~ GPU Overclock ~ Made kernel smoother ~ Might of left one or 2things out here
Whats new in v6
  • ~ Completely fixed boot problem (boot is set to 806MHz, don't complain as you will OC anyway :p) ~ Quicker boot time ~ Fixed battery issues :fingers-crossed: ~ Added governor-- Intellidemand2 ~ Removed GPU O/C ( causes lag :( ) ~ Wifi Signal and lock on much quicker/better ~ Alot of clean-ups & small fixes ~ Touchscreen fix ~ kgsl: Use highest performance level on wake-up from sleep
v9 changes
  • - Improved Battery Life - Thumbee support - ARM7 optimizations - Brought OC back down to 1.6 max (no need for it above 1.6 unless u want to kill your device) - Kernel sources completely reworked started from scratch o Sony xx.587 sources - Tiny RCU - Upddatedd patched and fixed LZO - lowered vfs cache pressure - Increased Wifi- Range and added support for channel 14 - Iyokan Touchscreen fix - Thanks @ Nick - 0 % Battery patch - Thanks @ Bazoocaze - Better memory copy - Better memory move - LMK Optimizations (LowMemoryKiller) - VDD support (voltage conrol) - Linaro Optimzations - Compaction added - KSM - CIFS (improved support) - NTFS - USB OTG - Updated to newest SIO Io-Scheduler - Google Snappy Compress & Decompress - Added Vibrate To Recovery (Notification to enter CWM) v10 - Built with Linaro 4.7.3 (02-01-13) - Reworked Ramdisk, uses new method - Auto Root updated to SuperSU, only roots device if Superuser.apk or SuperSU.apk dont already exist - New LuPuS menu - check in post #1 on how to use it - Build in wifi modules ( if wifi modules don't work on first install reboot) - Built in CIFS & USB OTG (from lupus menu) - Built in zRam, you can also change zRam size (from LuPuS menu) - TWRP and latest CWM Recovery {change default in LuPuS Menu) - Supports Gb and ICS (GB has wifi broken ATM) - Tweaks menu from LuPuS menu script - Free'd 11mb RAM - cgroup scheduling - binder changes from - binder: Fix use of uninitialized variable. - net sched: fix some kernel memory leaks - net/ipv4: Eliminate kstrdup memory leak - ipv4: force_igmp_version ignored when a IGMPv3 query received - pids: Fix a race in pid generation that causes pids to be reused immediately - smart toggle overclock upto 2ghz - changed RD compression to LZMA - enable group scheduling - removed some debugging - cleaned up config - USB tether - enable ipsec tunnel support in kernel - SQLITE3 DB vacumming - Further compressed ramdisk - disabled cuse, enabled md4 + nls_utf8 as modules **Probably alot more but this is all I can remember for now** -v11 - Updated kernel to - CWM = volume down - TWRP = volume up - Complete clean up and new improved LuPuS Menu - Free's more RAM 360mb RAM in total now - Fixed AROMA - Backport Binder from CAF 3.4.0 - Triple Buffer - Frandom - Tweaked deadline - Tweaked SmartassV2 - New governor SmartassH3 - New IO-Scheduler ZEN - Patch so entropy no longer depletes - Zcache - ARM optimizations - Genlock backported from CAF - Replaced old compaction with newer/better version - Backported logger from CAF and free'd RAM from logger - Updated improved LMK - Removed fudgeswap - Updated crc32 lib from 3.3 kernel - New net scheduler Stochastic Fair Blue (SFB) - Optimized Tiny RCU - CFS tweaks - Quick keyboard reset (hold HOME + POWER) - Timed_gpio backported from CAF - Snapdragon optiizations - Improved boot time - Improved wifi to load at first boot - Removed Autoroot feature ** Plus more see here for all patches and credits** Also Thanks at gu5t3r and [NUT] v12 - Fixed HDMI - Fixed Video playback/recording - Reverted back to linux kernel - Removed triple buffer (caused some lag) - Fixed problem with root @ gu5t3r - LuPuS Script now runs properly from Terminal Emulator @ gu5t3r - Free RAM = 355mb and is stable - Added fool-proof to ramdisk -- if non-supported Android version is found (not ICS or GB) Kernel will boot into CWM - Reduced size of kernel v13 - Fixed CPU Governor and Frequencies not sticking at boot -- thanks @gu5t3r ---- Custom CWM - Clean-up of menu - Added own wipe options menu -- with extra options - Aroma File Manager from CWM --- Must have aroma ( placed on root of sdcard) - Multi zip installer - Reboot options - Power off re-added under this menu - Pointless but people keep asking me for it so re-added wipe battery stats also. - LuPuS themed... v14 - Fixed Camera Key - Kernel works on CM9 - Removed persistent RAM - Remove other errors from dmesg - Improved wifi loading - Disabled Key Reset (can be enbled in LuPuS Menu) ---- CWM updated to - Fixed Advanced restore - Fixed busybox symlinks generation (aka) fixed CWM backup not working - Fixed install from sideload being mixed up with toggle signature - Remove confirmation from install from sideload as it can be cancelled at anytime. ---- Complete Ramdisk Clean up & Improvment - Reworked booting - Supports m2sd and other ap2sd scripts - Force booting -After 2 Vibrations Hold Home for ICS -Hold Home and press VolDown for CM9 -Hold Home and press VolUp for GB - Fixed Reboot To Recovery (It reboots to last one used IF you don't have scripts that wipe /cache on boot) - Reworked Kernel logs, they are located at /cache/recovery/ and /data/local/tmp/ - Improved init.d - lupus menu clean up - Added Vendor fix from Hallon & Anzu - option to mount / unmount - Backup / Restore /system/vendor - Boot.d - If phone is taking a long time to start move suspicious init.d scripts to /system/etc/boot.d They will be run in background and won't affect boot time. v15 - Added Ultra-KSM - Tuned Governors * superbad * lionheart * virtuous * darkside * conservative * smartassH3 - Really use google snappy zRam (improves zRam) - Fix nasty sigreturn bug - Fix compiler warnings - Do uninteruptible sleep - Other various fixes - Removed GB & CM9 support - Other various ramdisk improvments - Updated TWRP - Mounting Mass Storage should be fixed - Updated LuPuS CWM to latest Official CWM changes * Fixed advanced restore * Removed Reboot Options * Brough Reboot System Now back to Main Menu * Brought Power Off back to Main Menu * After install of zip dont return to main menu * Minor UI changes - Fixed Mounting Vendor (please test can be set via lupus menu) - patch can also be forced at boot by hold home + hold voldown = force ics + vendor patch hold home + tap vol down = force ics key -- Thanks @gu5t3r
  • v16 - Fix some lag in gaming - Set default swappiness to 20 - Removed fsync - Removed Cleancache - Removed zCache - Removed WasActive page flag - Removed Zen IO-Scheduler - Fixed issue with some devices booting into CWM - Fixed CWM install options order - Fixed TWRP adb and mounting USB storage - Fixed PATH for LuPuS Menu - Added UKSM options to LuPuS-Menu


If you like my work please consider buying me a beer or something else
by clicking the DONATE ME button, of course it isn't needed but greatly appreciated and keeps me motivated.



If you need root for STOCK ROM
Root : ( Flashable via recovery )
* SuperSU : Download
* Superuser : Download

md5 = 65693fa968dc00a5c5cf42705e0b9244

Check your MD5 and make sure it matches with the above before posting that it doesn't work for you

Wifi modules are built in

Mirrors - and all other releases

================================================== ================================================== ======

Folder for all older and current LuPuS-PRO kernels & modules:



================================================== ================================================== ======
The Following 120 Users Say Thank You to wedgess For This Useful Post: [ View ]
11th August 2012, 02:53 PM |#3  
wedgess's Avatar
OP Retired Forum Moderator / Recognized Developer
Flag Dublin, Ireland
Thanks Meter: 14,521
Donate to Me
LuPuS Menu

To Run LuPuS Menu use either ScriptManager get it HERE on google playstore


Use Terminal Emulator get it HERE on google playstore.


* information is in lupus menu

1/ CIFS Menu *
  • Enable

2/ zRam Menu *
  • Enable
    Set zRam size ( default is 60)

3/ Frandom Menu *
  • Enable

4/ USB OTG *
  • Enable

5/ Clean and Remove tweaks
  • Remove init.d's

6/ Tweak Menu
Note all tweaks are preset from here and option to set as init.d's
  • Clean all temp files
    SQLITE optimizations
    LMK Optimizations
    Network optimizations
    Defend against ARP spoofing
    Remove android logger
    SDcard speed tweak
    Flag blocks as non-rotational

7/ Performance Menu
Note all options are se by user input from here and option to set as init.d's
  • Set CPU frequencies
    Set Governor
    Set IO-Scheduler
    Voltage Control
    VM tweaks (explained below)

VM Tweaks

dirty ratio and dirty background ratio 1 & 2
This controls how often the kernel writes data to "disk" (in our case the internal microSD system card, not the removable microSD card). When your apps write data to disk, Linux actually doesn't write the data out to the disk right away, it actually writes the stuff to system memory and the kernel handles when and how the data is actually going to be flushed to the disk. These values represent a percentage, the higher the percentage, the longer it waits to flush, the lower the percentage, the more often flushes will occur. Now remember, we are dealing with solid state storage, not the traditional disk platter and spindle. So we are actually able to delay flushes a little longer with solid state versus a traditional hard drive disk.

How old "dirty" data should be before the kernel considers it old enough to be written to disk. It is expressed in 100ths of a second.


This is the interval of when the writeback daemons periodically wake up and write "old" data out to disk. It is expressed in 100ths of a second.

min free kbytes
This is used to force the Linux VM to keep a minimum number of kilobytes free. The VM uses this number to compute a pages_min value for each lowmem zone in the system. Each lowmem zone gets a number of reserved free pages based proportionally on its size. Default is 2048kb.

This controls overcommit of system memory, possibly allowing processes to allocate (but not use) more memory than is actually available.

0 - Heuristic overcommit handling. Obvious overcommits of address space are refused. Used for a typical system. It ensures a seriously wild allocation fails while allowing overcommit to reduce swap usage. root is allowed to allocate slighly more memory in this mode. This is the default.
1 - Always overcommit. Appropriate for some scientific applications.
2 - Don't overcommit. The total address space commit for the system is not permitted to exceed swap plus a configurable percentage (default is 50) of physical RAM. Depending on the percentage you use, in most situations this means a process will not be killed while attempting to use already-allocated memory but will receive errors on memory allocation as appropriate.

A property for the Linux kernel that changes the balance between swapping out runtime memory, as opposed to dropping pages from the system page cache. Swappiness can be set to values between 0 and 100 inclusive. A low value means the kernel will try to avoid swapping as much as possible where a higher value instead will make the kernel aggressively try to use swap space.

VFS Cache Pressure
File system cache (dentry/inode) is really more important than the block cache above in dirty ratio and dirty background ratio, so we really want the kernel to use up much more of the RAM for file system cache, this will increas the performance of the system without sacrificing performance at the application level. The default value is 100, as a percentage, and what you want to do is lower the value to tell the kernel to favor the file system cache and not drop them aggressively.

8/ Enable / Disable Quick Key Reset
- Reboot device quickly by Holding HOME and POWER Key (Disabled by default)
  • - Enable
    - Disable

9/ Vendor Options
- Fix for Anzu and Hallon Vendor problem
  • - Mount
    - Unmount
    - Backup
    - Restore

If you like my work please consider buying me a beer or something else
by clicking the DONATE ME button, of course it isn't needed but greatly appreciated and keeps me motivated.
The Following 45 Users Say Thank You to wedgess For This Useful Post: [ View ]
11th August 2012, 03:00 PM |#4  
Dexxmor's Avatar
Senior Member
Flag near munich
Thanks Meter: 714
Donate to Me
Great, will test it

EDIT: Bootet, i testet the Kernel on stockrom and, when it comes out, on ndet JJ Hybrid 12
First Bug: No Wlan, but i think it is the failure of the wifi modules for the Arkknight kernel.
11th August 2012, 03:20 PM |#5  
Senior Member
Thanks Meter: 25
what recovery does this use?
11th August 2012, 03:22 PM |#6  
wedgess's Avatar
OP Retired Forum Moderator / Recognized Developer
Flag Dublin, Ireland
Thanks Meter: 14,521
Donate to Me
Originally Posted by cLeAv0

what recovery does this use?

Its 5.0.27 going to change to dooms recovery and ill add aroma file manager with volume down button and back as recovery , depending on how many people download/thanks ect

Sent from my Xperia Play
The Following 16 Users Say Thank You to wedgess For This Useful Post: [ View ]
11th August 2012, 04:04 PM |#7  
Senior Member
Thanks Meter: 25
Originally Posted by wedgess

Its 5.0.27 going to change to dooms recovery with my modded aroma file manager, depending on how many people download/thanks sect

Sent from my Xperia Play

I see. I hope you update this frequently cause i'll gonna be using it What's the busybox version included in the recovery?
11th August 2012, 04:36 PM |#8  
CONdemmedNORmal's Avatar
Senior Member
Thanks Meter: 91
Sorry for the noob question but will it work on arc s??
And are the modules included in the kernel or are they flashed separatly??

Sent from my LT18i using xda premium
11th August 2012, 04:38 PM |#10  
heinrichkaiser's Avatar
Senior Member
Flag Hamburg
Thanks Meter: 343
Originally Posted by CONdemmedNORmal

Sorry for the noob question but will it work on arc s??
And are the modules included in the kernel or are they flashed separatly??

Sent from my LT18i using xda premium

No.. It is for Pro.. It means it is for Xperia Pro only.. None other than that..

Sent from my MK16i using Tapatalk 2
11th August 2012, 05:29 PM |#11  
Rene_ajax's Avatar
Senior Member
Flag Amsterdam
Thanks Meter: 166
PLEASE not everybody has thanked him do that i only tested he did great work we didnt had this powerfull kernel if he took the time to port it!
The Following 2 Users Say Thank You to Rene_ajax For This Useful Post: [ View ] Gift Rene_ajax Ad-Free
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes