FORUMS
Remove All Ads from XDA

[GT-P51xx|SGH-I497|SGH-T779] CF-Auto-Root

11,218 posts
Thanks Meter: 86,139
 
By Chainfire, Senior Moderator / Senior Recognized Developer - Where is my shirt? on 26th October 2012, 05:55 PM
Post Reply Email Thread
Check your device model ! Settings -> About device -> Model number. See the third post for exact supported model numbers. If your device is a totally different model, it will not work (may even brick) !



CF-Root is the root for "rooting beginners" and those who want to keep as close to stock as possible. CF-Root is meant to be used in combination with stock Samsung firmwares, and be the quickest and easiest way for your first root.

Donate
CF-Root has been available for many devices and has clocked over 8 million downloads. This is not even counting custom ROMs that already include it. Don't be a leech, buy me a beer (and use the "Thanks" button!). Imagine if every CF-Root user has donated me $1...

What's installed
- SuperSU binary and APK
- Stock recovery

Installation and usage
Flash the CF-Auto-Root package as PDA in ODIN (details on how to do that are in next post), and your device should reboot into a modified recovery (signified by a large red Android logo) and it will install SuperSU for you and restore the stock recovery, and reboot back into Android.

If you don't get to the red Android logo, boot into recovery manually ("adb reboot recovery", or boot while holding Power+VolUp+Home).

Using this root increases your flash counter. You should run Triangle Away (see below) after rooting to reset the counter. Note that if you want to run custom kernels or custom recoveries, your flash counter will be set to 1 at every boot. Either configure Triangle Away to reset the counter at every boot (Play version only) or only reset the counter when you need to go into warranty.

Did you see the red Android logo during rooting, but SuperSU does not appear? This may sometimes occur due to left-over files and settings, however, you can usually install SuperSU from Google Play at this stage and it'll just work.

Not included - Triangle Away
Triangle Away can be used to reset the flash counter after installing CF-Root. The flash counter keeps track of how many custom firmwares you have flashed, as this voids warranty. (No idea what this about ? Read up on it, you will want to use this !)

Not included - adbd Insecure
As this CF-Root does not include a custom kernel, adb shell does not have root access by default (you can still get it by typing su inside the shell), nor is adb remount supported, nor will adb push and adb pull work on system files. adbd Insecure can be used to remedy this situation. (No idea what this is about ? Don't worry about it !)

CF-Auto-Root homepage
http://autoroot.chainfire.eu/

CF-Auto-Root main thread
[CENTRAL] CF-Auto-Root
For requests for new roots and generic discussion - please keep device specific discussion in the thread you are viewing now.
The Following 90 Users Say Thank You to Chainfire For This Useful Post: [ View ]
 
 
26th October 2012, 05:55 PM |#2  
Chainfire's Avatar
OP Senior Moderator / Senior Recognized Developer - Where is my shirt?
Thanks Meter: 86,139
 
Donate to Me
More
ODIN Installation (detailed)
- Follow these instructions to the letter. Do not touch any buttons or checkboxes that are not listed below to touch!
- Unzip the attached Odin3-vX.X.zip file
- Download and unzip the CF-Auto-Root-....zip file (see posts below this one)
- If you end up with a recovery.img and cache.img file, you've extracted twice. You need to end up with a .tar.md5 file - don't extract that one
- (USB) Disconnect your phone from your computer
- Start Odin3-vX.X.exe
- Click the PDA button, and select CF-Auto-Root-....tar.md5
- Put your phone in download mode (turn off phone, then hold VolDown+Power to boot - if it asks you to press a button to continue, press the listed button, or run adb reboot download command)
- (USB) Connect the phone to your computer
- Make sure Repartition is NOT checked
- Click the Start button
- Wait for Android to boot
- Done (if it took you more than 30 seconds, you need practise!)

- NOTE: Sometimes the device does *not* boot into recovery mode and root your device. Just do the entire procedure again if this happens. If it still will not install root and such, make sure that in Odin "Auto Reboot" is not checked. Then after flashing, hold VolUp+Power (for several seconds) to boot into recovery manually. This will start the install process.

New to Samsung? Unfamiliar with Odin? Think all the above is a hassle? Get used to it. It's very simple, and us Samsung folk use Odin (or Mobile ODIN ) for everything! It's so very very convenient once you get used to it. Notice the 30 second comment above? For experienced users, the entire process indeed takes only 30 seconds!

You may now optionally want to install and run Triangle Away to reset the flash counter.
Attached Files
File Type: zip Odin3-v1.85.zip - [Click for QR Code] (198.6 KB, 37206 views)
The Following 58 Users Say Thank You to Chainfire For This Useful Post: [ View ]
26th October 2012, 05:55 PM |#3  
Chainfire's Avatar
OP Senior Moderator / Senior Recognized Developer - Where is my shirt?
Thanks Meter: 86,139
 
Donate to Me
More
Download
2013.05.20 --- CF-Auto-Root

SuperSU: v1.30

Download:

GT-P5100: CF-Auto-Root-espresso10rf-espresso10rfxx-gtp5100.zip
GT-P5110: CF-Auto-Root-espresso10wifi-espresso10wifixx-gtp5110.zip
GT-P5113: CF-Auto-Root-espresso10wifi-espresso10wifibby-gtp5113.zip
SGH-I497: CF-Auto-Root-espresso10att-espresso10uc-samsungsghi497.zip
SGH-T779: CF-Auto-Root-espresso10tmo-espresso10tmo-sght779.zip

--- History ---
2013.05.20: SuperSU v1.30
2013.02.20: SuperSU v1.05
2012.12.02: SuperSU v0.98
2012.10.26: SuperSU v0.96
The Following 50 Users Say Thank You to Chainfire For This Useful Post: [ View ]
27th October 2012, 07:42 AM |#4  
Junior Member
Thanks Meter: 4
 
More
Thanks a lot Chainfire
This makes it a lot easier rooting the Tab.
Will try it out right away
The Following User Says Thank You to Trans4M For This Useful Post: [ View ] Gift Trans4M Ad-Free
27th October 2012, 11:35 AM |#5  
steveathome's Avatar
Senior Member
Flag Adelaide
Thanks Meter: 36
 
More
Samsung P5100
Used CF-Root on my P1000 when you made that available. Now have just used your CF-Root for Tab 2 on my P5100. As usual excellent work and also just bought Triangle Away from the Play store. Thanks Chainfire for doing this for us.
27th October 2012, 07:58 PM |#6  
HAKANN's Avatar
Senior Member
Thanks Meter: 38
 
More
Great, I will post the results tomorrow
28th October 2012, 10:11 AM |#7  
The Stranger's Avatar
Senior Member
Flag Amsterdam
Thanks Meter: 100
 
More
Root
I have to be honest, no full rooted device...

Flash the CF-Auto-Root package as PDA in ODIN, and your device should reboot into a modified recovery (signified by a large red Android logo) and it will install SuperSU for you and restore the stock recovery, and reboot back into Android.


So the Weltwon method is still my root..

But TriangleAway v2.15 works on 4.03.+ 4.04. + 4.1.1 THANKYOU.
30th October 2012, 01:39 PM |#8  
HAKANN's Avatar
Senior Member
Thanks Meter: 38
 
More
Working good!
THANKSS
1st November 2012, 01:14 PM |#9  
harshadura's Avatar
Senior Member
Flag Colombo
Thanks Meter: 128
 
More
thx lot
8th November 2012, 02:34 PM |#10  
Vreestyle's Avatar
Senior Member
Flag A-Town
Thanks Meter: 830
 
Donate to Me
More
@chainfire. My is 5110 rooted already other the latest aokp M1 JB
But I've one problem; my boot logo won't show up anymore.
Boot logo espresso10.jpg fails to draw

When I flash this file will this reset that boot logo?

Thanks in advance!!

Verstuurd van mijn GT-P5110 met Tapatalk
The Following User Says Thank You to Vreestyle For This Useful Post: [ View ] Gift Vreestyle Ad-Free
15th November 2012, 09:40 AM |#11  
xu7jp4's Avatar
Senior Member
Thanks Meter: 113
 
Donate to Me
More
It's possible to reinstall CWMManager.apk on P5110 ?
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread