Second, a huge thanks goes to Garwynn for helping me compile all of these one-clicks! It's a lot of work to do all of them and it would take MUCH longer without him.
Thanks also goes to sfhub (for teaching me how to create Odin One-Click.exe files and creating the original thread I'm using as a template for this one), Agat63 (for helping me get the hang of what sfhub started teaching me), chris41g (for hosting all my work here and with the Modem and Kernel Repositories), and to everyone else in our community who makes this possible!
This JB build is a VERY early Alpha engineering build and is not meant to be used as a daily driver. There is no Modem included in the TAR.
Currently there are several features that do not work (including 3G) but at least we know that Samsung is working on a JB build for us!
There will not be a one-click.exe for this JB build. It can only be flashed in Odin. If flashing this be sure to put the included CSC file in the CSC slot in Odin. If you don't the flash will most likely fail.
1) Backup your phone with a Nandroid and TB (or other backup app).
Your phone will lose ALL data during the flash process. It is highly recommended to store your backup on a removed SDcard or on a PC.
2) Install Samsung USB/Android drivers (if not already installed). [USB/Android]
3) Download the FJ10 Stock JB ROM.
FJ10-Unencrypted.7z (Resets all data)
4) Unzip the TAR and CSC files using 7zip (this package is a self-extracting exe you should just be able to double-click on it after download and it will do the rest).
5) Start Odin.
Select PDA and Navigate to the location where the FJ10 TAR was saved upon extract from the 7Zip archive.
Select CSC and Navigate to the location where the FJ10 CSC file was saved upon extract from the 7Zip archive.
6) Place phone in Download Mode.
Power down phone.
Wait for capacitative button lights to turn off.
Simultaneously Press and Hold [Power]+[Volume Down] until confirmation screen appears.
Press [Volume Up] to enter Download mode.
7) Connect USB cable to PC and phone.
Wait for Odin to recognize the phone.
8) Start Odin flash process.
9) Complete - PASS!
Status should change to green PASS! At this point your phone should automatically reboot.
The boot process will take slightly longer than usual during which time you'll see the Sprint 4G logo screen.
Congratulations you're on FJ10!
[ROM][ODIN][TAR]SPH-D710 FJ10 (FJ10 Kernel/ROM) , ROM for the Samsung Epic 4G Touch
ROM OS Version: 4.2.x Jelly Bean
Last Updated 2015-02-19