FORUMS

Fastboot oem commands

49 posts
Thanks Meter: 41
 
By wouterx, Member on 29th May 2013, 11:26 AM
Post Reply Email Thread
Some of these commands can and will brick your phone.

Maybe this will be usefull.

fastboot oem
  • (bootloader) command list
  • (bootloader) dmesg
  • (bootloader) last_dmesg
  • (bootloader) clearaspflag
  • (bootloader) refurbish
  • (bootloader) get_identifier_token
  • (bootloader) checkKeycardID
  • (bootloader) get_tamper_flag
  • (bootloader) checkSbl1
  • (bootloader) checkHWSecurity
  • (bootloader) enter
  • (bootloader) keytest
  • (bootloader) heap
  • (bootloader) boot
  • (bootloader) reset
  • (bootloader) powerdown
  • (bootloader) rebootRUU
  • (bootloader) heap_test
  • (bootloader) erase_phone_storage
  • (bootloader) erase_nfc_record
  • (bootloader) gotohboot
  • (bootloader) resetgift
  • (bootloader) ats
  • (bootloader) rtask
  • (bootloader) task
  • (bootloader) enableqxdm
  • (bootloader) gencheckpt
  • (bootloader) readmeid
  • (bootloader) readpid
  • (bootloader) writepid
  • (bootloader) readcid
  • (bootloader) writecid
  • (bootloader) readimei
  • (bootloader) writeimei
  • (bootloader) readsecureflag
  • (bootloader) writesecureflag
  • (bootloader) ddr2gbh
  • (bootloader) ramdump2gbh
  • (bootloader) ddr2gstatus
  • (bootloader) get_temp
  • (bootloader) writemeid
  • (bootloader) lock
  • (bootloader) readusername
  • (bootloader) writeusername
  • (bootloader) resethtcdebugflag
  • (bootloader) load_emmc
  • (bootloader) check_emmc_mid
  • (bootloader) read_mmc
  • (bootloader) load_modem_emmc
  • (bootloader) get_wp_info_emmc
  • (bootloader) send_wp_info_emmc
  • (bootloader) get_ext_csd_emmc
  • (bootloader) get_sector_info_emmc
The Following 17 Users Say Thank You to wouterx For This Useful Post: [ View ] Gift wouterx Ad-Free
29th May 2013, 11:37 AM |#2  
hamdir's Avatar
Recognized Contributor
Beirut
Thanks Meter: 27,191
 
More
i dont understand how do you use it?

fasboot oem readcid?
29th May 2013, 11:41 AM |#3  
Guich's Avatar
Senior Member
Flag Somewhere
Thanks Meter: 3,368
 
Donate to Me
More
Quote:
Originally Posted by hamdir

i dont understand how do you use it?

fasboot oem readcid?

Yes, in fastboot usb you have to type:
Code:
fastboot oem readcid
and you can see your cid.
You can use
Code:
fastboot getvar cid
too
The Following 2 Users Say Thank You to Guich For This Useful Post: [ View ] Gift Guich Ad-Free
29th May 2013, 11:41 AM |#4  
shiningarmor's Avatar
Senior Member
Thanks Meter: 356
 
More
what's refurbish for?
29th May 2013, 12:11 PM |#5  
forelli's Avatar
Senior Member
Kashyyyk, Galactic Empire
Thanks Meter: 100
 
More
fastboot oem get_identifier_token...
29th May 2013, 06:55 PM |#6  
ECEXCURSION's Avatar
Senior Member
Flag Minneapolis, MN
Thanks Meter: 528
 
More
Quote:
Originally Posted by shiningarmor

what's refurbish for?

I'm curious too. Refurbish sounds exciting. Someone should try it!

Sent from my HTC One
30th May 2013, 07:46 AM |#8  
OP Member
Flag hier
Thanks Meter: 41
 
More
Quote:
Originally Posted by ECEXCURSION

I'm curious too. Refurbish sounds exciting. Someone should try it!

Sent from my HTC One

Quote:
Originally Posted by wouterx

I will try ...

[email protected]*******:~$ fastboot oem refurbish
< waiting for device >
...
(bootloader) Start Verify: 3
(bootloader) Start Verify: 3
(bootloader) Boot/Recovery signature checking...
(bootloader) TZ_HTC_SVC_HASH ret = 0
(bootloader) setup_tag addr=0x80600100 cmdline add=0x00347020
(bootloader) TAG:Ramdisk OK
(bootloader) TAG:skuid 0x34C0C
(bootloader) TAG:hero panel = 0x940069
(bootloader) TAG:engineerid = 0x0
(bootloader) TAG: PS ID = 0x0
(bootloader) TAG: Gyro ID = 0x2
(bootloader) Device CID is not super CID
(bootloader) CID is HTC__E11
(bootloader) setting->cid::HTC__E11
(bootloader) serial number: FA354W903578
(bootloader) commandline from head: console=ttyHSL0,115200,n8 androidboot
(bootloader) .hardware=m7 user_debug=31
(bootloader) command line length =866
(bootloader) active commandline: poweron_status=1 reset_status=0 board_m7
(bootloader) _ul.disable_uart3=0 diag.enabled=0 board_m7_ul.debug_uart=0
(bootloader) userdata_sel=0 androidboot.emmc=true androidboot.pagesize=20
(bootloader) 48 skuid=0 ddt=20 ats=0 dap=6 androidboot.lb=1 uif=O000 td.
(bootloader) sf=1 td.td=1 td.ofs=328 td.prd=1 td.dly=0 td.tmo=300 hlog.of
(bootloader) s=628 un.ofs=694 imc_online_log=0 androidboot.efuse_info=2N
(bootloader) SL androidboot.baseband=4A.14.3250.13 androidboot.cid=HTC__E
(bootloader) 11 androidboot.devicerev=3 androidboot.batt_poweron=good_bat
(bootloader) tery androidboot.car
(bootloader) aARM_Partion[0].name=misc
(bootloader) aARM_Partion[1].name=recovery
(bootloader) aARM_Partion[2].name=boot
(bootloader) aARM_Partion[3].name=system
(bootloader) aARM_Partion[4].name=local
(bootloader) aARM_Partion[5].name=cache
(bootloader) aARM_Partion[6].name=userdata
(bootloader) aARM_Partion[7].name=devlog
(bootloader) aARM_Partion[8].name=pdata
(bootloader) aARM_Partion[9].name=extra
(bootloader) aARM_Partion[A].name=radio
(bootloader) aARM_Partion[B].name=adsp
(bootloader) aARM_Partion[C].name=dsps
(bootloader) aARM_Partion[D].name=radio_config
(bootloader) aARM_Partion[E].name=modem_st1
(bootloader) aARM_Partion[F].name=modem_st2
(bootloader) aARM_Partion[10].name=cdma_record
(bootloader) aARM_Partion[11].name=reserve_1
(bootloader) aARM_Partion[12].name=reserve_2
(bootloader) aARM_Partion[13].name=reserve_3
(bootloader) aARM_Partion[14].name=reserve
(bootloader) partition number=21
(bootloader) Valid partition num=21
(bootloader) setting_get_bootmode() = 3
(bootloader) smem 8CF04000 (phy 8CF04000): TZ_HTC_SVC_UPDATE_SMEM ret = 0
(bootloader) TZ_HTC_SVC_ENC ret = 0
(bootloader) Start Verify: 3
(bootloader) TZ_HTC_SVC_ENC ret = 0
(bootloader) TZ_HTC_SVC_DISABLE ret = 205643776 (0xC41E000)
(bootloader) [PARTITION_ERR] partition_write_prot_emmc: Cannot find end p
(bootloader) artition [modem]
(bootloader) msm_mpu_emmc_protect: set write protection fail (from reserv
(bootloader) e_2 to modem)
(bootloader) Start Verify: 3
(bootloader) [RUMBA_S] firmware version: 3-45-43-33-0-0-0-0
(bootloader) [RUMBA_S] ondevice version: 3-45-43-33-4-28-A3-0
(bootloader) [RUMBA_S] firmware version already up-to-date
(bootloader) pm8921_vreg_disable function, vreg_id = 7
(bootloader) pm8921_vreg_disable function, vreg_id = 37
(bootloader) pm8921_vreg_disable function, vreg_id = 34
(bootloader) pm8921_vreg_disable function, vreg_id = 8
(bootloader) jump_to_kernel: machine_id(4308), tags_addr(0x80600100), ker
(bootloader) nel_addr(0x80608000)
(bootloader) -------------------hboot boot time:46925 msec
FAILED (status read failed (No such device))
finished. total time: 8.247s

In the end its boots in ClockworkMod Recovery....
The Following 2 Users Say Thank You to wouterx For This Useful Post: [ View ] Gift wouterx Ad-Free
7th June 2013, 11:23 PM |#9  
Rydah's Avatar
Inactive Recognized Contributor
Flag Southern California
Thanks Meter: 2,091
 
Donate to Me
More
bump! as we have s off for all!!!
20th October 2013, 02:22 AM |#10  
Senior Member
Flag Telegram
Thanks Meter: 152
 
More
Hey guys.
So, I'll be direct. None command worked on my RAZR D3.
Maybe fast boot have a limitation or some kind like that.
Did you see something like this?
Please, if you did, "quote me"hehe
20th October 2013, 09:08 PM |#11  
zaphodbeeb's Avatar
Senior Member
Betelgeuse
Thanks Meter: 493
 
Donate to Me
More
Quote:
Originally Posted by Adriano-A3

Hey guys.
So, I'll be direct. None command worked on my RAZR D3.
Maybe fast boot have a limitation or some kind like that.
Did you see something like this?
Please, if you did, "quote me"hehe

I think different hboots have different commands available, so between devices its likely that they will be different also.
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes