FORUMS
Remove All Ads from XDA

[KERNEL][AGNi][CM] 18-05-2016 AGNi pureCM v4.5.5 N7105 (ULTRA SMOOTH)

6,314 posts
Thanks Meter: 13,739
 
Post Reply Email Thread
OC v4.5.5 Available Now

(Cyanogenmod smdk4412 kernel source based !)

NOTE: I dont own an N7105 and i cannot test this myself... use at your own risk !!!

smdk4x12 Sources based (Unofficial roms)
18-05-2016 Update v4.5.5 (ANYROM+AROMA) (smdk4x12_Kitkat-Lolypop_Marshmallow official/old_builds)
build wih GCC 6.0 UBERTC which promises to give good user experience
15-05-2016 Update v4.5.4(ANYROM+AROMA) (smdk4x12_Kitkat-Lolypop_official/old_builds)
ALSA: usb-audio: avoid freeing umidi object twice | ALSA: timer: Fix double unlink of active_list | ALSA: timer: Fix race among timer ioctls | ALSA: timer: Harden slave timer list handling | pipe: limit the per-user amount of pages allocated in pipes | ALSA: hrtimer: Fix stall by hrtimer_cancel() | usbnet: cleanup after bind() in probe() | USB: cdc-acm: more sanity checking | netfilter: x_tables: fix unconditional helper | ipv4: Don't do expensive useless work during inetdev destroy. | Switched to GCC 5.3.1 Linaro toolchain | mdm: revert to stock I9305 update

OLD CHANGELOGS:-
  • CPU GOVERNORS: conservative, ondemand, powersave, interactive, performance, userspace, lulzactive, lulzactiveq, pegasusq, zzmoove (since v2.3.1)
  • I/O GOVERNORS: deadline, cfq, row, sio (additional V(R) & BFQ v5r1 I/O schedulers since v2.3)
  • default cpu governor: lulzactiveq
  • default I/O governor: row
  • NTFS R/W kernel support
  • CIFS & NFS Network FileSystems
  • swap support enabled
  • KSM enabled
  • cleancache enabled
  • automatic efs backup on /data/media/psn-efs-backup
  • scoobydoo sound implemented (replaced by boeffla sound v1.6 since v2.3)
  • 512MB Zram with zcache
  • Zram with SNAPPY compression as first swap priority (Google SNAPPY-v3 in v2.3) (LZ4 since v2.3.1)
    (LOW CPU LOAD FOR COMPRESSION of ram memory blocks with little loss of compress(not for v2.3.1 & above)ion ratio compared to default LZO compression)
  • uses my compiled busybox (v1.22) to support swap device priorities
  • kernel uses LZMA compression
  • [COLOR="Magenta"]10-06-2013: Updated kernel with all latest CM commits including S4 (I9505) wifi driver and latest ramdisk
  • 12-06-2013: reimplemented triangle away support which was overwritten by previous CM bulk update commit
  • 24-06-2013 : updated soures with latest CM commits including Samsung OSRC Update 10 commit
    NEW FEATURES v2.3 :-
    Boeffla Audio v1.6 | Dynamic Fsync v1.2 | Battery Charging voltages support | better LED notification management | CPU UV support
    Google SNAPPY-v3 Zram | Updated ROW I/O scheduler to v4 | Added V(R) I/O scheduler | Added BFQ v5r1 I/O scheduler | Mutable kernel logger interface
    Supports inbuilt BOEFFLA TWEAKS APP which supports custom user changes only for supported features
    pureCM v2.3 kernel is preconfigured with the best configuration from me
    no AutoOC for this version as u can configure OC frequency yourself from Boeffla App
  • 20-07-2013 NEW FEATURES in v2.3.1 :-
    Updated latest relevant CM commits | GPU OC/UV support | LZ4 compression for Zram | ZZmoove-v0.6 CPU governor | integrated AGNi preloadSWAP option in Boeffla app
  • 23-07-2013 Small Update:-
    Added selinux support(same as in latest CM) | CWM-FLASHABLE CPU-GPU_OC/UV boot failure reseter tool automatically placed on internal sdcard
  • 04-09-2013 Update:-
    Upstream linux kernel to 3.0.94 | Updated latest CM commits | MALI GPU frequency threshold change support | Updated Zzmoove to 0.7c | fixed Zcache working | Touch Boost | Touch Wake | GCChf 4.7.2 compiled arm-v7l cortex-a9 optimised | SAMSUNG OSRC exFAT File System support v1.2.4 | Boeffla-Sound: Engine 1.6.4 | Implemented better charging control with changeable unstable power selectable
  • 29-09-2013 Updates in v2.3.3d (CM 10.2) :-
    Linux kernel upstreamed to 3.0.97 | rebased on latest CM source from scratch | Updated Zzmoove to 0.7d | fixed user reported notification sound issue (nasty one) | fixed user reported initial freezy video playback | Implemented some Zram modifications with 4 zram devices support | updated BFQ I/O scheduler to v6r2 | implemented modified SIO I/O scheduler | Introducing AGNi Main user profiles (Extreme Battery Save / Battery Save / Normal / Gaming) which does not break NON-OC limits but user can override settings at will | removed Mutable android & kernel logger interfaces (buggy for CMs) | drop & forget for init.d scripts (user doesnt need to set permissions manually) | Repacked zip: fixed gpu oc frequencies gpu overvolting nag screens (you dont need to overvolt gpu when gpu oc anymore)
  • 30-09-2013 Finalizing bug fixes in v2.3.4 (CM 10.2) :-
    fixed missing Triangle away support in earlier version
  • 20-10-2013 Small Update v2.3.4a (CM 10.2, BAM, PAC & ProBam) :-
    Upstream to 3.0.100 | removed touch boost & touch wake for time being | updated CM-10.2, BAM, PAC & ProBam ramdisks

  • 29-11-2013 Update v2.5 (CM10.2 Support ENDS HERE) :-
    For Cm10.x : Upstream to 3.0.101 | some performance improvements | internal & external SD read_ahead_kb values user tweakable | Implemented Power Saving CPU load balancer (sched_mc_power_savings) | user changable Quad-Zram implementation(with equal swap priority) size and swappiness | some code change regarding how boeffla sound is handled upon boot
    For CM 11 Unofficials : Implemented MALI r3p2 GPU drivers | Implemented SAMSUNG OSRC I9300 Update 12 s3cfb patches | added "Export SECONDARY_STORAGE to /storage/sdcard1" | updated healthd binary | added ignore unstable power charging option (changed custom charging code implementation) | applied Fix external sdcard mountpoint | some code change regarding how boeffla sound is handled upon boot | Implemented MALI r3p2 GPU OC/UV Note that for current implementation users have to OverVolt GPU manually if GPU OC
    Generic framework "framework-2.jar" introduced in v2.4 and above (teamed up with Yank555, Googy, Teufel, AndiP, Temasek), this is to get rid of proprietory framework naming conventions and come up with an aligned approach between rom and kernel devs.
    So please do pass this message along to your favorite ROM devs, we have stopped supporting additional frameworks with specific ROM names.(Bam Rom & PAC to be precise) Note that only framework-2.jar is supported, (instead of framework-pac.jar or framework-bam.jar) you have to rename depending on ur rom
  • 30-11-2013 v2.5a (CM11 UNOFFICIALS) :-
    updated Mali r3p2 OC/UV implementation (now users dont have to OverVolt GPU when GPU OC) | reduced some mali debug messages
  • 02-12-2013 v2.5b (CM11 UNOFFICIALS) :-
    applied fix for broken MALI r3p2 GPU OC/UV sysinterface | introduced "160/266/350/400/440" GPU freq steps in Boeffla Tweaks
    ( 07-12-2013 NOW CM11 OFFICIAL is SUPPORTED with mali r3p1
    SUPPORTED CM11_UNOFFICIAL ROMS: OMNI, Beanstalk, Slimkat, willl03
  • 12-12-2013 v2.5c (CM11) :-
    applied some more Mali400 gpu oc/uv fixes | updated WiFi drivers from 1.61.47 --> 1.61.58 | synced to latest CM 11 official kernel sources | auto calibration of proximity sensor
  • 21-12-2013 v2.5d (CM11) :-
    Moved to better 1.8GHz CPU OC/UV implementation | OMNI-type vibrator, hardware keys, backlight sysfs implementation (OMNIROM) | exFAT integrated in kernel by default instead of modules | Updated exFAT to v1.2.5 | added settings backup and restore to Boeffla Tweaks and its reset settings will not need reboot and default settings will be applied instantly
  • 25-12-2013 reuploaded v2.5d (CM11) :-
    Implemented Touchwake v1.1a | added support for more roms
  • 05-01-2014 Update v2.5e (CM11) :-
    Implemented Frandom | tweaked "random" (the default linux kernel RNG/PRNG device) | added Frandom lagfix-helper option in AGNi Control (/dev/random and /dev/urandom is replaced by symlinked /dev/frandom and /dev/erandom respecively = speeds up entropy generation without seeder app or rngd service) | Replaced "Boeffla Tweaks" app with my modified "AGNi Control" app (TESTED ART COMPATIBLE) [ THANKS to @HM.Carbide ] | Implemented Toouchboost
  • 18-01-2014 v2.6a (ANY CM11 OFFICIAL/UNOFFICIAL ) :-
    ==> Introducing my "ANYROM" kernel flash method AKA "Kernel Patcher-v4.1"
    (Implementation of my old GALAXY ACE WORKS ) :-
    1. It extracts the installed kernel boot.img from the device
    2. It cracks it open to get the zImage and ramdisk
    3. it extracts this old ramdisk
    4. it removes any unwanted or conflicting elements with AGNi kernel (typically other custom CM kernel ramfs elements)
    5. It adds/removes/patches the files on this extracted ramdisk as necessary
    6. it packs this ramdisk and builds a new flashable boot.img using AGNi compiled zImage
    7. It places its log at /data/.AGNi which is refreshed on each pureCM kernel install
    8. This new boot.img is then flashed !!! Voila !

    NB: you wont find any boot.img in this installer zip, dont freak out
    THIS "ANYROM" INSTALLATION METHOD DIFFERS WITH "ANYKERNEL" AS IT HAS THE FLEXIBILITY TO MODIFY RAMFS CONTENTS AS REQUIRED
    ==> Other updates:
    Wifi: filter multicast packages while suspended | Proportional Rate Reduction for TCP | reduce battery-monitor timeouts | added PegasusqPlus CPU governor | added Zen I/O scheduler | some reduced debugging | Implemented touchkey and vibrator modifications to make work on CM & OMNI roms | Boeffla-Sound 1.6.5 | added 2GHz OC support | added min cpu freq settings in AGNi Control | added touchkey light modes option in AGNi Control | Implemented s3cfb update12 | Implemented MDNIE HIJACK (sysfs tunables for screen colors, sharpness) - by default natural and standard profiles are available as of now
  • 22-01-2014 Small update v2.6b
    Bumped up ANYROM installer to v4.2 | LMK: add config option to support oom_adj values in sources | fixed little bug in touchkey light modes option | CPU UV voltages changed back to normal types.... now non-uv = stock voltages and no need for overvoltage add-on confusion & CPU-UV till -120mV allowed in AGNi Control
  • 24-01-2014 Update v2.6c
    arm unaligned memory access | mmc: disable crc for better performance | arch/arm/vfp: change compile flags - Neon & hard-float support | ARM: Add optimised swahb32() byteswap helper | ARM-spinlock: use ticket algorithm for ARMv6+ locking implementation | ARM: L1 cache optimization | Implemented Adaptive Body Bias (ABB) | LMK minfree tweakable from AGNi Control and integrated with AGNi profiles
  • 22-02-2014 Update v2.7.1
    F2FS filesystem implementation ( /system /data /cache /preload automounted as ext4 or f2fs) | Using modified pegasusq from Perseus | cfg80211: Fix memory leak | added flexrate interface support for supporting governors | Revert "mmc: disable crc for better performance" to ensure data safety | added YankasusQ governor (Based on PegasusQ) | fixed non-boot issue after AGNi preloadSWAP turned on | AGNi ANYROM installer updated to v4.3 (now uses awk too) | added sysrw & sysro | new compiled busybox v1.23 with expanded features (1.7MB sized at /sbin) | fix non boot on omni with f2fs | disabled background_gc for f2fs mounts | increased swap priority for preloadSWAP feature (now all 4 zrams + preload swap will have same priority) | Migrate to Stock WiFi driver | implemented async fsync | some modifications to dynamic fsync | ARM: 7668/1: fix memset-related crashes caused by recent GCC (4.7.2) optimizations | backport: smp: patches from mainline 3.5 to hopefully help with hotpluging | backport SLUB from Linux 3.3 (thanks to faux123) | disabled ANDROID_LOW_MEMORY_KILLER_AUTODETECT_OOM_ADJ_VALUE S
  • 08-03-2014 Update v2.7.3
    Disable Dynamic Fsync (seems to cause issues with Async Fsync) | Bring back original stock pegasusq (pegasusqplus is actually a renamed pegasusq from perseus) | fix auto-installation of AGNi Control app | fixed zram0 not turning off when turning off Zrams by AGNi Control | switch to GCC 4.8.3 linaro cortex-a9 optimised toolchain
    - added AGNi PhoneKill app (Experimental: it kills com.android.phone and doesnt have any UI)
    The network bars will be zero then will come back immediately as the killed process is auto started
    This is to test weather the post-call battery drain of ~2%/hour can be stopped by manually restarting the com.android.phone process instead of rebooting the device.
    You can safely uninstall it if not needed, unlike AGNi Control, it wont be autoinstalled on every boot.
  • 23-03-2014 Update v2.7.5 R2 (ANYROM+AROMA)
    Applied some f2fs related commits | REMOVED AGNi PhoneKill App (will be auto removed as well as it doesnt work and a real fix is out) | fixed "Encryption Unsuccessful" errors (now u can use /system as ext4 with /data as f2fs) | changed some mount options | completely removed ASYNC_FSYNC | added option to enable/disable dynamic fsync, disabled by default | added option to enable/disable on-boot filesystems checking (ext4/f2fs) log placed on internal storage | added option to delete battery stats on each boot | implemented AROMA GUI installer v2.70 RC2 with boeffla sound and wolfson sound selectables | added option to set selinux permissive or enforcing | set ROW as default from now on | set internalsd and externalsd read_ahead_kb to 512 & 1024 respectively | implemented Zzmoove v0.8 | iptables support | [ R3: LMK updated to stock sources | added ExternalSd USB UMS switching option | added all Zzmoove v0.8 profiles ]
  • 16-04-2014 Update v2.7.6 (ANYROM+AROMA)
    logger: reduce reserved memory | mm/page_io: remove duplicated compressed pages in memory | ARM: implement flush_cache_louis() | cpufreq: Manage only online cpus | sync cm kernel commits | reworked AGNi Profiles and backup/restore
  • 03-05-2014 Update v2.7.7 (ANYROM+AROMA)
    zram, zsmalloc, zcache, cleancache updated from 3.9 | updated lz4, lzo compressor/decompressor and crc32 algorithm | compiled by GCChf 4.9.1 linaro toolchain | reverted some commits | sync CM kernel updates | mm: fix memory management & CM CAMERA FIX (googyanas) | option to turn off touchkey light
  • 13-06-2014 Update v2.8.0 (ANYROM+AROMA)
    Applied lot of newer f2fs commits | sync cm kernel sources | Implemented SLQB memory allocator | support for kernel mode NEON | applied many ARM-specific commits | arm/crypto: Add optimized AES and SHA1 routines | drivers/mmc: Update from SAMSUNG OSRC I9300 Update 13 | Implement Many Linaro Optimisations | Enable ARCH_POWER | fs/sdcardfs: Add sdcardfs support from SAMSUNG OSRC I9300 Update 13 | reduced active zrams to one and set 400MB default size | added AROMA option for disabling all kernel sound mods | sync CM kernel sources | Zzmoove v0.9_beta1 | Merged SAMSUNG OSRC I9300 Update 13, SAMSUNG OSRC I9305 Update 2, SAMSUNG OSRC N7100 JB Opensource Update 3, SAMSUNG OSRC N7105 JB Update 2, SAMSUNG OSRC SCH-I605 JB Update, SAMSUNG OSRC SEA KK N7100XXUFND4 Important Updates - WiFi bcmdhd v1.28.19.28 to v1.141.15_1213_RC2 - VPN interceptor Update - VMWARE modules Update - exFAT v1.2.5 to v1.2.7 - sdcardfs (from 4.3 sources) & sdcardfskk (Kitkat update to sdcardfs) - SAMSUNG MODEM interface updates - QUALCOMM LTE MODEM updates - mmc & nfc update - HID updates - sensors and sensorhub updates - minor mali r3p2 modifications | Implement touchwake KnockON (arter97) | AGNi sdcard1<-->sdcard0 Switcher (extsd2intsd replacement for CM using sdcardfskk) | added 3072 read_ahead_kb option
  • 18-06-2014 Update v2.8.1 (ANYROM+AROMA)
    Make sure touchwake is not active when on call | fix derp arch/arm/mm/cache-l2x0.c | Finish merging in I9300 update12 display components | Zzmoove v0.9_beta2 | Fix CVE-2014-3153 | Completely revert all earlier stock source merges ( no time to finish bugs occuring in multiple devices ) except SAMSUNG OSRC SEA KK N7100XXUFND4 updates | Revert earlier linaro optimisations (those ones effectively reduced performance as per benchmarks) | fixed disabled touchkey light again turning on after reboot
  • 21-06-2014 Update v2.8.1_R2 (ANYROM+AROMA)
    Revamp my ramfs structuring (now the ext4/f2fs status of partitions are ascertained and corresponding changes are made to fstab file on the fly and then they are mounted normally from it) | made changes to AGNi sdcard1<-->sdcard0 Switcher (using sdcardfs(from stock 4.3) instead of kitkat's sdcardfskk) | cleaned up my unused code in ramfs | WiFi Update from v1.141.15 to v1.141.44 [SCH-I605 NA OSRC KK Update]
  • 24-06-2014 Update v2.8.1_R3 (ANYROM+AROMA)
    Further modifications to ramfs strutcuring | MALI: r3p2 rel3 -> r3p2 rel4 | earysuspend: speedup late resume (faster wakeup of the device)
  • 03-07-2014 Update v2.8.2 (ANYROM+AROMA)
    Boeffla-Sound: Engine 1.6.6 | Implement Update BFQ v6r2 -> v7r2 I/O sched | More F2FS latest commits | added option in aroma installer to select alternative old wifi driver module | dropped touchwake-knockon for now
  • 07-07-2014 Update v2.8.3 (ANYROM+AROMA)
    Introduce timer slack controller | fs: vfat: reduce the worst case latencies | Backport AIO from Linux 3.6.x | pegasusqplus modifications with firelock | some ARM specific commits | fixed UMS mode | sdcard1<-->sdcard0 switcher v1.2
  • 14-08-2014 Update v2.8.5 (ANYROM+AROMA)
    update Mali r3p2-rel4 to SAMSUNG KitKat Source | Revert "ARM: 7006/1: Migrate to asm-generic wrapper support" | Revert "Introduce timer slack controller" | Revert "patch: add SLQB memory allocator by Nick Piggin" | futex: Prevent attaching to kernel threads | futex: Add another early deadlock detection check | cpuset: mm: reduce large amounts of memory barrier related damage v3 | Mdnie Hijack modifications by @gub | cpufreq: Update to zzmoove 0.9-beta3 | workqueues: Introduce new flag WQ_POWER_EFFICIENT for power oriented workqueues | Implement Intelliactive governor (without intelliplug for now) | ext4: Add support for FIDTRIM, a best-effort ioctl for deep discard trim | Si47xx: properly free resources if failure to initialize | mdnie: Enable negative mode compatibility of newer MDNIE drivers | smdk4412: merge mali r4p0-rel0 driver (R4P0-nameless variant)
  • 06-10-2014 Update v2.8.9 (ANYROM+AROMA)
    cpuidle-exynos4: calm down some logspam | Zzmoove Version 0.9 beta4 | mach-exynos: Support for current CPU temperature reading from Exynos4 TMU driver | ksm: Provide support to use deferred timers for scanner thread | ksm: check and skip page, if it is already scanned (Pradeep Sawlani) | Migrate to GCChf arm-cortex-a9 4.9.2 toolchain | Add "True CD-ROM emulation" support | ARM: smp: flush L1 cache in cpu_die() | ARM: 7606/1: cache: flush to LoUU instead of LoUIS on uniprocessor CPUs | ARM: 7752/1: errata: LoUIS bit field in CLIDR register is incorrect | cpuidle: Fix NULL pointer dereference during hotplug | ARM: add cpufreq transiton notifier to adjust loops_per_jiffy for smp | cpufreq: Fix policy stucking if user & kernel min/max don't overlap | cpuidle: make a single register function for all | timer: optimize apply_slack() | ARM: smp: Wait just 1 second for other CPU to halt | nohz: Reduce overhead under high-freq idling patterns | cpuidle: remove cross-cpu IPI by new latency request. | CPU hotplug, debug: detect imbalance between get_online_cpus() and put_online_cpus() | irq: Set CPU affinity right on thread creation | futex: Prevent attaching to kernel threads | freezer: shorten freezer sleep time using exponential backoff | intelliactive: predefine hispeed_freq | ext4: Speedup WB_SYNC_ALL pass called from sync(2) | net: Performance fix for process_backlog | n7100: jb_update3 --> kk_N7100XXUFND3 fs changes | Add "pegasusqpluso" CPU governor (unmodified but renamed pegasusqplus) | Boeffla Sound: v1.6.7 | LPM: Squash commit ::: s3cfb_ops: Attempt to fix LPM (off charging mode) graphics issue & samsung_battery: Attemp to fix LPM (off charging mode) with KitKat bootloader | LMK: bring back to stock Cyanogenmod version | Revert some commits | bcmdhd: minor change from N7100XXUFNI1 | fs/exfat: update to v1.2.9
  • 25-10-2014 Update v2.9.0 (ANYROM+AROMA)
    Implement kexec-hardboot | nohz: Fix update_ts_time_stat idle accounting (ZaneZam) | ZZmoove Version 1.0 beta1 | silence annoying kmsgs during core changes | Revert "ARM: add cpufreq transiton notifier to adjust loops_per_jiffy for smp" | Revert "PM: Introduce suspend state PM_SUSPEND_FREEZE" | Revert "readded wakelock: instead of directly going to suspend_mem, use the new suspend_freeze" | Update LTE and non-LTE modems from SAMSUNG OSRC I9305 EUR KK Update | Implement USB HID Keyboard/Mouse ROLE support for Android device from https://github.com/pelya/android-keyboard-gadget (needs supported APK from HERE)
  • 22-12-2014 Update v2.9.1_R2 (ANYROM+AROMA) (Kitkat-Lolypop)
    Mali R4P0 UMP: add back missing ioctl | deadline: Allow 0ms deadline latency | ext4: remove some debugging functions by Samsung & sync with kernel.org | Input: Send events one packet at a time | fs: default to noatime/nodiratime | zzmoove v1.0 beta4 | Switch to GCChf 4.9.3 linaro cortex-a9 optimised toolchain | revert many commits | otg: when removing ED from readyQ also set flag | removed support for seliinux enforcing mode | Implement kexec-hardboot Updated | net/ipv4 updates | smdk4412: Import changes for mfc driver from latest n8000 KK sources
  • 04-05-2015 Update v4.4.2(ANYROM+AROMA) (smdk4x12_Kitkat-Lolypop_official_AOSP)
    Revert "ARM: 7873/1: vfp: clear vfp_current_hw_state for dying cpu" | Revert "ARM: 7419/1: vfp: fix VFP flushing regression on sigreturn path" | Revert "ARM: 7400/1: vfp: clear fpscr length and stride bits on entry to sig handler" | Revert "ARM: 7399/1: vfp: move user vfp state save/restore code out of signal.c" | Revert "cpu_pm: Add cpu power management notifiers" | Revert "ARM: vfp: Use cpu pm notifiers to save vfp state" | Revert "arm/crypto: Add optimized AES and SHA1 routines | "Revert "CPU hotplug, writeback: Don't call writeback_set_ratelimit() too often during hotplug" | Revert "freezer: shorten freezer sleep time using exponential backoff" | Revert "ARM: 7606/1: cache: flush to LoUU instead of LoUIS on uniprocessor CPUs" | Revert "arm: optimized current_pt_regs()" | ZZmoove Version 1.0 beta5 | dhd: apply old changes to updated driver | bcmdhd: build into the kernel if modules are disabled | net: wireless: bcmdhd: Add support for hidden ssid PNO scan | bcmdhd: pass ipv6 in suspend | net: wireless: bcmdhd: Reduce scan dwell time only in power-save mode | net: wireless: bcmdhd: Reduce scan dwell time to reduce power | sound/soc/codecs: Make possible coexistence of Boeffla Sound and Wolfson Sound | mali r3p2: IGNORE MALI R3P2 rel 3 blobs API COMPATIBILITY CHECK | Revert "battery: Add MAX77693/Midas charger control" | samsung-battery: Squash Commit : Implement Charge Level Interface v2 (andip71) | Touch to wake: Add option to keep touch-to-wake active all the time when connected to charger (andip71) | mdm: Update mdm | mm/ashmem.c: fixed a typo introduced by samsung | CIFS: force default into modules | Offline charging bug fix for old bootloader and KK Stock by scholbert@xda | Backport random driver from Linux 3.19+ | MobiCore: skip initializations with AOSP ROMs (arter97) | lzo: check for length overrun in variable length encoding | block: disable add_random | selinux: allow unknown by default | selinux: always grant access | fs/f2fs: update (arter97) | net/bluetooth/hci_conn.c : fix compiler warnings | sound/soc/codecs: implement proper way of on-the-go switching between Boeffla Sound and Wolfson sound control
  • 09-05-2015 Update v4.4.3(ANYROM+AROMA) (Kitkat-Lolypop_unofficial_old_builds)
    sound/soc/codecs: increase wolfson sound default earphone level to 57 | USB keyboard/mouse role support: fix MacOS compatibility | bcmdhd: revert to CM version | Revert lot of commits
  • 12-05-2015 Update v4.4.3(ANYROM+AROMA) (Kitkat-Lolypop_unofficial_old_builds)
    update wm8994, Remove and cleanup wolfson sound | Squashed commit - Disable various debugging | Implement kexec-hardboot (newer kitkat-kexec-new branch) | adjustable vibration level in AGNi Control | reapply some previously reverted commits
  • 03-06-2015 Update v4.4.5(ANYROM+AROMA) (smdk4x12_Kitkat-Lolypop_official/old_builds)
    Use drivers/usb/gadget from CM source for AGNi pureCM builds | Bring net/bluetooth and drivers/usb/core to GT-N7100_KK_Opensource_Update1 state | Revert "earysuspend: speedup late resume (faster wakeup of the device)" | drivers/cpufreq: misc governor changes (arter97) | Revert "cpu boost: backport missing functions from 3.4 (DerTeufel)" | Revert "cpufreq: Add cpu-boost driver" | Revert "cpufreq: Add a sync limit to cpu-boost" | drivers/cpufreq: Add smartass v2 , update interactive (arter97) | Implemented intelli_plug (arter97) | Revert "scheduler: compute time-average nr_running per run-queue" | Add samsung sdcardfs from 5.0 as sdcardfslp (arter97) | netfilter: IDLETIMER: fix invalid deference of timer | ext4: Speed up FITRIM by recording flags in ext4_group_info | ipv4: Missing sk_nulls_node_init() in ping_unhash() | f2fs: ditch SEGMENT_SIZE for f2fs_trim_fs | f2fs: disable userspace FITRIM ioctl for now (anyways we are using auto discard from the kernel) | kernel/futex.c: Squash update | Modify "Dynamically adjust cpufreq_max_limit according to scaling_max setting without breaking power save mode" to be effective only for AGNi pureSTOCK builds | revert wm8994 updates | Agni control app no longer request for root on each boot | touchwake charger mode + 10 sec normal touchwake option.
    Intelli-plug is disabled for "lulzactiveq, pegasusq, pegasusqplus, performance, powersave, userspace, yankasusq, zzmoove, pegasusqpluso" as they have their own hotplugging logic implemented.
    I had frequent SOD's with smartassV2 governor on pureCM, be informed.
  • 20-10-2015 Update v4.4.6 (ANYROM+AROMA) (smdk4x12_Kitkat-Lolypop_official/old_builds)
    Zzmoove Version 1.0 beta8 | kernel: Replace timeconst.pl with a bc script | random updated | lmk: properly consider cached memory usable | Update LZ4 & sync with upstream (arter97) | Revert "mm: fix extra_free_kbytes tunable for CMA" | Revert "add extra free kbytes tunable" | sensors: cm36651: fix build with debugging enabled | drivers: net: usb: add support for ASIX AX88179 based USB ethernet adapters | nf: IDLETIMER: time-stamp and suspend/resume handling | extcon: adc-jack: Use power efficient workqueue | Update f2fs and dependencies (arter97) | Disable CONFIG_CPU_FREQ_GOV_ONDEMAND_FLEXRATE
  • 28-10-2015 Update v4.4.7 (ANYROM+AROMA) (smdk4x12_Kitkat-Lolypop_official/old_builds)
    accessory: fix false disconnect due to a signal sent to the reading process | pstore: selinux: add security in-core xattr support for rootfs, pstore and debugfs | tcp: add a sysctl to config the tcp_default_init_rwnd | misc: uidstat: avoid create_stat() race and blockage | Staging/Android/binder modifications | s3cfb: fix S3CFB_SET_VSYNC_INT ioctl | squashed updates/changes for cgroup.c futex.c bio.c | AGNi control's installation of every boot issue fixed | Zzmoove-zanezam-optimised as new default governor | selinux: apply binder related modifications from SAMSUNG N7100 update
  • 11-11-2015 Update v4.4.8r3(ANYROM+AROMA) (smdk4x12_Kitkat-Lolypop_official/old_builds)
    ReApply wm8994 updates from SAMSUNG OSRC I9305 EUR KK Update | mali: support mali fence from SAMSUNG OSRC SWA KK N7100XXUFNI1 Update 1 | Fix build error due to touchwake-charger-mode when CHARGE Control is disabled | Revert "lmk: properly consider cached memory usable" | Revert "squashed updates/changes for cgroup.c futex.c bio.c" | Revert previous drivers/staging/android/binder.c commits | otg: when removing ED from readyQ also set flag | Bring drivers/usb/gadget to GT-N7100_KK_Opensource_Update1 state" | Fix build error due to touchwake-charger-mode when CHARGE Control is disabled | Bring drivers/usb/gadget to GT-N7100_KK_Opensource_Update1 state" | Update IOSCHED_BFQ v7r2 --> v7r8 (codeworkx) | Enable setting security contexts on scardfslp | Revert "Squashed commit - Disable various debugging" (DOCK FREEZE FIX) | Advanced Ondemand Control at end of AGNi Control | [ 11-11-2015 v4.4.8r3 : various selinux updates from official cm13 kernel branch | ondemand control small fixes ]
  • 09-01-2016 Update v4.4.9(ANYROM+AROMA) (smdk4x12_Kitkat-Lolypop_official/old_builds)
    hashtable: introduce a small and naive hashtable | proc: uid: Adds accounting for the cputimes per uid | proc: uid: Changes the thread notifier to profile event notifier | proc: uid_cputime: fix show_uid_stat permission | uid_cputime: Extends the cputime functionality to report power per uid | uid_cputime: Fixes double accounting race condition on task exit | uid_cputime: fix overflow when printing cputime | uid_cputime: Iterates over all the threads instead of processes | uid_cputime: don't use task->power as it is not available in 3.0 | ext3: ignore ext4-option nomblk_io_submit | cputime: Clean up cputime_to_usecs and usecs_to_cputime macros | uid_cputime: fix mismerge | ARM: 7206/1: Add generic ARM instruction set condition code checks | arm: add SDIV/UDIV emulation for ARMv7 processors | arm/traps: get full DIV instruction in thumb mode | mms152_ts: Disable native touchboost - add in AGNI_PURECM_MODE | proximity sensor calibration in boot script | Implement Control_Ondemand_M9 | Modified agni control auto install code | kernel cmdline changes for CM13 compatibility | fs/ecryptfs: bring to CM state | ARM: 7527/1: uaccess: explicitly check __user pointer when !CPU_USE_DOMAINS
  • 16-02-2016 Update v4.5.1(ANYROM+AROMA) (smdk4x12_Kitkat-Lolypop_official/old_builds)
    Revert "tick: Cleanup NOHZ per cpu data on cpu down" | Revert "cpufreq: pegasusq: allow keeping at least two cores awake" | GT-N7100_KK_Opensource_N7100XXUFOE1 | mdm: No need to panic. Stop the modem from crashing and rebooting the device for no real reason | neigh: Better handling of transition to NUD_PROBE state | Fix Bluetooth Stuttering by P.A.N@xda: get_monotonic_boottime overflow patch | bcmdhd: update from i9305 source drop | Bring drivers/usb/core and gadget to CM state
  • 08-04-2016 Update v4.5.2(ANYROM+AROMA) (smdk4x12_Kitkat-Lolypop_official/old_builds)
    staging: iio: use monotonic time since boot for event timestamps | cpufreq: pegasusq: boost: add support for setting a boost freq/cpulock,tone down the logspam,don't NULL timer function,drop more debugging | sensor: lsm330dlc: allow exposing in /dev/input | crypto: testmgr - add empty test vectors for null ciphers | KEYS: Fix race between read and revoke. This fixes CVE-2015-7550 | include/linux/poison.h: fix LIST_POISON{1,2} offset | BACKPORT: pagemap: do not leak physical addresses to non-privileged userspace | bcmdhd: Add checks for stack buffer overflows | net: wireless: bcmdhd: Add checks for stack buffer overflows | net: wireless: bcmdhd: check packet length for event messages | tty: Fix unsafe ldisc reference via ioctl(TIOCGETD) | mm: reorder can_do_mlock to fix audit denial | __ptrace_may_access() should not deny sub-threads | ext4: make orphan functions be no-op in no-journal mode | net: fix iterating over hashtable in tcp_nuke_addr() | net: add validation for the socket syscall protocol argument | bluetooth: Validate socket address length in sco_sock_bind() | tracing/syscalls: Fix perf syscall tracing when syscall_nr == -1 | tracing/syscalls: Ignore numbers outside NR_syscalls' range | net/l2tp: don't fall back on UDP [get|set]sockopt | KEYS: close race between key lookup and freeing | net: ipv4: current group_info should be put after using. | mnt: Only change user settable mount flags in remount | mnt: Prevent pivot_root from creating a loop in the mount tree | vfs: read file_handle only once in handle_to_path | fs: take i_mutex during prepare_binprm for set[ug]id executables | android: drivers: workaround debugfs race in binder | net: add length argument to skb_copy_and_csum_datagram_iovec | md: use kzalloc() when bitmap is disabled | KEYS: Fix handling of stored error in a negatively instantiated user key | vfs: new internal helper: mnt_has_parent(mnt) | vfs: more mnt_parent cleanups | Staging: android: binder: Add some tracepoints | Revert "udp: remove redundant variable" | fuse: break infinite loop in fuse_fill_write_pages() | pipe: iovec: Fix memory corruption when retrying atomic copy as non-atomic | input: Don't use monotonic time for event time stamps. | Input: add infrastructure for selecting clockid for event time stamps | mfc5x: update from n7100 source drop | pipe: Fix buffer offset after partially failed read | agni control installed as system app
    [v4.5.2_r2 13-04-2016: Remove touchwake charger mode TO fix proximity sensor issue while call | Fix USB OTG and remove redundant AGNI_PURECM_MODE | cpufreq: remove power save framework support of stock roms | removed the experimental ondemand control stuffs | fixed sec dock freeze]


Stock sources based(Unofficial ROMS)
18-05-2016 Update v4.5.5 (Stock-sources based)
build wih GCC 6.0 UBERTC which promises to give good user experience
15-05-2016 Update v4.5.4 (Stock-sources based)
ALSA: usb-audio: avoid freeing umidi object twice | ALSA: timer: Fix double unlink of active_list | ALSA: timer: Fix race among timer ioctls | ALSA: timer: Harden slave timer list handling | pipe: limit the per-user amount of pages allocated in pipes | ALSA: hrtimer: Fix stall by hrtimer_cancel() | usbnet: cleanup after bind() in probe() | USB: cdc-acm: more sanity checking | netfilter: x_tables: fix unconditional helper | ipv4: Don't do expensive useless work during inetdev destroy. | Switched to GCC 5.3.1 Linaro toolchain | mdm: revert to stock I9305 update

OLD CHANGELOGS :-
AGNi pureCM OC v3.0.3+ (like: CM12 | Nameless | RR) new builds. Available Now
(AGNi pureSTOCK v4.3.3_R3 kernel based !)
  • 20-01-2015 Update v3.0.3(ANYROM+AROMA) (Lollypop-NewBuilds)
    Total Power of AGNI pureSTOCK v4.3.3_R3 | modified drivers of vibrator, touchkey and touchscreen in line with CM specific modifications. | Revert "net: Performance fix for process_backlog" | Revert "ext4: Speedup WB_SYNC_ALL pass called from sync(2)" | Revert "ARM: smp: Wait just 1 second for other CPU to halt" | cpu_pm: Add cpu power management notifiers | Rename touchwakee sysfs entries to prevent interferences from other rom/app controls | Revert "mali: update to drivers of GT-N8000_SEA_KK_Opensource.zip" | Revert some mmc & mm changes from "SAMSUNG OSRC I9305 EUR KK Update" | Revert "cpuidle: remove cross-cpu IPI by new latency request." | Revert "timer: optimize apply_slack()" | Revert "cpufreq: Fix policy stucking if user & kernel min/max don't overlap" | Revert "cpuidle: Fix NULL pointer dereference during hotplug" | Revert "ARM: 7606/1: cache: flush to LoUU instead of LoUIS on uniprocessor CPUs" | Revert Mali changes from "SAMSUNG OSRC I9305 EUR KK Update" | ZZmoove Version 1.0 beta5 | Revert "Input: Send events one packet at a time" | net: wireless: bcmdhd: Add support for hidden ssid PNO scan | net: wireless: bcmdhd: Reduce scan dwell time only in power-save mode | net: wireless: bcmdhd: Reduce scan dwell time to reduce power | Made possible coexistence of Boeffla Sound and Wolfson Sound in single zImage with on the go switching from Agni Control | Enable various kernel debugging support | Partial power related reverts from I9305 Update | Revert fs related modifications from SAMSUNG OSRC I9305 Update
  • 25-01-2015 Update v4.3.7(ANYROM+AROMA) (Lollypop-NewBuilds)
    disable the extra kernel debugging | remove power supply,battery,charging updates from SAMSUNG OSRC I9305 Update (SOD fix) | mali r3p2: IGNORE MALI R3P2 rel 3 blobs API COMPATIBILITY CHECK - This disables the MALI API checking and assumes compatibility, thereby not resorting to black screen - now any r3p2 blobs are supported | samsung-battery : Implement a newer "Charge Level Interface v2" (andip71) | Touch to wake: Add option to keep touch-to-wake active all the time when connected to charger (andip71) | ignored "charger_softreg" wakeLocks for MAX77693 charger | kernel version bumped to v4.3.7 as it shares same stock base with cm specific differences
  • 15-03-2015 Update v4.3.8
    Modifications to Charge Level Interface v2, samsung battery and max77693_charger (fixed 2000mA charging) | mdm: Update mdm | mm/ashmem.c: fixed a typo introduced by samsung | CIFS: force into modules | Integrate MDNIE CONTROL for digital brightness support (you need to play with tunables manually in /sys/class/misc/mdnie for now) | Update kexec-hardboot | Offline charging bug fix for old bootloader and KK Stock by scholbert@xda
  • 29-03-2015 Update v4.3.9
    Revert "MDNIE CONTROL modifications" for now | Backport random driver from Linux 3.19+ | Changes from SHV-E210S_KK_Opensource_Update2.zip | Revert support in fs/ for "mark_buffer_dirty_inode_sync" | Again cleanly Implement kexec-hardboot | pegasusqpluso set as default in AGNi Control
  • 27-04-2015 Update v4.4.0
    Revert: "cpu_pm: Add cpu power management notifiers" | MobiCore: skip initializations with AOSP ROMs (arter97) | lzo: check for length overrun in variable length encoding. | block: disable add_random | selinux: allow unknown by default | selinux: always grant access | fs/f2fs: update (arter97) | Disable CONFIG_BATTERY_MAX77693_CHARGER_SKIP_WAKELOCKS | fimc-is: Adjust to CM/Omnirom implementation | mali: fix Kconfig warning messages | mfc5x: Adjust to CM/Omnirom implementation | Input: Send events one packet at a time | Power/Battery/Charger: Bring back to N7100 preNI1 base
  • 30-04-2015 Update v4.4.1
    drivers/usb/gadget: add required modifications for CM builds | Accumulative squashed fixes + changes from SAMSUNG OSRC I9305 Update | Revised AGNi Control profiles v2.0 | Revised AGNi Control CPU-UV v2.0 based on device's detected asv_level
  • 04-05-2015 Update v4.4.2
    Revert "freezer: shorten freezer sleep time using exponential backoff" | net/bluetooth/hci_conn.c : fix compiler warnings | sound/soc/codecs: implement proper way of on-the-go switching between Boeffla Sound and Wolfson sound control
  • 09-05-2015 Update v4.4.3
    sound/soc/codecs: increase wolfson sound default earphone level to 57 | USB keyboard/mouse role support: fix MacOS compatibility | Revert lot of commits | Switched to GCC 4.8 google prebuilt toolchain
  • 12-05-2015 Update v4.4.4
    Remove and cleanup wolfson sound | Squashed commit - Disable various debugging | Implement kexec-hardboot (newer kitkat-kexec-new branch) | adjustable vibration level in AGNi Control | reapply some previously reverted commits | smdk4412: reboot bootloader boots into download mode | mfc5x-cm: for CM implementation to fix video recording issue
  • 03-06-2015 Update v4.4.5 (Stock-sources based)
    Use drivers/usb/gadget from CM source for AGNi pureCM builds | Bring net/bluetooth and drivers/usb/core to GT-N7100_KK_Opensource_Update1 state | Revert "earysuspend: speedup late resume (faster wakeup of the device)" | drivers/cpufreq: misc governor changes (arter97) | Revert "cpu boost: backport missing functions from 3.4 (DerTeufel)" | Revert "cpufreq: Add cpu-boost driver" | Revert "cpufreq: Add a sync limit to cpu-boost" | drivers/cpufreq: Add smartass v2 , update interactive (arter97) | Implemented intelli_plug (arter97) | Revert "scheduler: compute time-average nr_running per run-queue" | Add samsung sdcardfs from 5.0 as sdcardfslp (arter97) | netfilter: IDLETIMER: fix invalid deference of timer | ext4: Speed up FITRIM by recording flags in ext4_group_info | ipv4: Missing sk_nulls_node_init() in ping_unhash() | f2fs: ditch SEGMENT_SIZE for f2fs_trim_fs | f2fs: disable userspace FITRIM ioctl for now (anyways we are using auto discard from the kernel) | kernel/futex.c: Squash update | Modify "Dynamically adjust cpufreq_max_limit according to scaling_max setting without breaking power save mode" to be effective only for AGNi pureSTOCK builds | revert wm8994 updates | Agni control app no longer request for root on each boot | touchwake charger mode + 10 sec normal touchwake option.
    Intelli-plug is disabled for "lulzactiveq, pegasusq, pegasusqplus, performance, powersave, userspace, yankasusq, zzmoove, pegasusqpluso" as they have their own hotplugging logic implemented.
    I had frequent SOD's with smartassV2 governor on pureCM, be informed.
  • 20-10-2015 Update v4.4.6 (Stock-sources based)
    Zzmoove Version 1.0 beta8 | kernel: Replace timeconst.pl with a bc script | random updated | lmk: properly consider cached memory usable | Update LZ4 & sync with upstream (arter97) | Revert "mm: fix extra_free_kbytes tunable for CMA" | Revert "add extra free kbytes tunable" | sensors: cm36651: fix build with debugging enabled | drivers: net: usb: add support for ASIX AX88179 based USB ethernet adapters | nf: IDLETIMER: time-stamp and suspend/resume handling | extcon: adc-jack: Use power efficient workqueue | dm-crypt: allow trailing "0" argument for compat with Android 5.1.1 vold | Update f2fs and dependencies (arter97) | Disable CONFIG_CPU_FREQ_GOV_ONDEMAND_FLEXRATE
  • 25-10-2015 Update v4.4.7 (Stock-sources based)
    accessory: fix false disconnect due to a signal sent to the reading process | pstore: selinux: add security in-core xattr support for rootfs, pstore and debugfs | tcp: add a sysctl to config the tcp_default_init_rwnd | misc: uidstat: avoid create_stat() race and blockage | bcmdhd wifi modifications | Staging/Android/binder modifications | drivers: video: samsung: implement vsync sysfs handling | s3cfb: fix S3CFB_SET_VSYNC_INT ioctl | squashed updates/changes for cgroup.c futex.c bio.c | AGNi control's installation of every boot issue fixed | Zzmoove-zanezam-optimised as new default governor
  • 10-11-2015 Update v4.4.8r2 (Stock-sources based)
    ReApply wm8994 updates from SAMSUNG OSRC I9305 EUR KK Update | mali: support mali fence from SAMSUNG OSRC SWA KK N7100XXUFNI1 Update 1 | Properly apply power/battery code from SAMSUNG OSRC SWA KK N7100XXUFNI1 Update 1 | Fix build error due to touchwake-charger-mode when CHARGE Control is disabled | Revert "lmk: properly consider cached memory usable" | Revert "squashed updates/changes for cgroup.c futex.c bio.c" | Revert previous drivers/staging/android/binder.c commits | otg: when removing ED from readyQ also set flag | Bring drivers/usb/gadget to GT-N7100_KK_Opensource_Update1 state" | CONFIG_USB_HID_KBD_MOUSE_ROLE now controls "USB HID Keyboard/Mouse ROLE support for Android device" | Bring drivers/usb/gadget to GT-N7100_KK_Opensource_Update1 state" | Update IOSCHED_BFQ v7r2 --> v7r8 (codeworkx) | Enable setting security contexts on scardfslp | Revert "Squashed commit - Disable various debugging" (DOCK FREEZE FIX) | Advanced Ondemand Control at end of AGNi Control | [ 11-11-2015 v4.4.8r3 : various selinux updates from official cm13 kernel branch | ondemand control small fixes ]
  • 06-01-2016 Update v4.4.9 (Stock-sources based)
    hashtable: introduce a small and naive hashtable | proc: uid: Adds accounting for the cputimes per uid | proc: uid: Changes the thread notifier to profile event notifier | proc: uid_cputime: fix show_uid_stat permission | uid_cputime: Extends the cputime functionality to report power per uid | uid_cputime: Fixes double accounting race condition on task exit | uid_cputime: fix overflow when printing cputime | uid_cputime: Iterates over all the threads instead of processes | uid_cputime: don't use task->power as it is not available in 3.0 | ext3: ignore ext4-option nomblk_io_submit | cputime: Clean up cputime_to_usecs and usecs_to_cputime macros | uid_cputime: fix mismerge | ARM: 7206/1: Add generic ARM instruction set condition code checks | arm: add SDIV/UDIV emulation for ARMv7 processors | arm/traps: get full DIV instruction in thumb mode | mms152_ts: Disable native touchboost - add in AGNI_PURECM_MODE | proximity sensor calibration in boot script | Implement Control_Ondemand_M9 | Modified agni control auto install code | kernel cmdline changes for CM13 compatibility | fs/ecryptfs: bring to GT-N7100_SWA_KK_Opensource_Update1_NI1 | fs/ecryptfs_cm for AGNI_PURECM_MODE
  • 02-02-2016 Update v4.5.0 (Stock-sources based)
    sensorhub: Fixes and cleanups for CM builds | I9300 CM : Turn-Off charging method change for CM13 | Revert "tick: Cleanup NOHZ per cpu data on cpu down" | Applied GT-N7100_KK_Opensource_N7100XXUFOE1 | Revert "cpufreq: pegasusq: allow keeping at least two cores awake"
  • 16-02-2016 Update v4.5.1 (Stock-sources based)
    Fix Bluetooth Stuttering by P.A.N@xda | neigh: Better handling of transition to NUD_PROBE state | mdm: No need to panic. Stop the modem from crashing and rebooting the device for no real reason
  • 07-04-2016 Update v4.5.2 (Stock-sources based)
    staging: iio: use monotonic time since boot for event timestamps | cpufreq: pegasusq: boost: add support for setting a boost freq/cpulock,tone down the logspam,don't NULL timer function,drop more debugging | sensor: lsm330dlc: allow exposing in /dev/input | crypto: testmgr - add empty test vectors for null ciphers | KEYS: Fix race between read and revoke. This fixes CVE-2015-7550 | include/linux/poison.h: fix LIST_POISON{1,2} offset | BACKPORT: pagemap: do not leak physical addresses to non-privileged userspace | bcmdhd: Add checks for stack buffer overflows | net: wireless: bcmdhd: Add checks for stack buffer overflows | net: wireless: bcmdhd: check packet length for event messages | tty: Fix unsafe ldisc reference via ioctl(TIOCGETD) | mm: reorder can_do_mlock to fix audit denial | __ptrace_may_access() should not deny sub-threads | ext4: make orphan functions be no-op in no-journal mode | net: fix iterating over hashtable in tcp_nuke_addr() | net: add validation for the socket syscall protocol argument | bluetooth: Validate socket address length in sco_sock_bind() | tracing/syscalls: Fix perf syscall tracing when syscall_nr == -1 | tracing/syscalls: Ignore numbers outside NR_syscalls' range | net/l2tp: don't fall back on UDP [get|set]sockopt | KEYS: close race between key lookup and freeing | net: ipv4: current group_info should be put after using. | mnt: Only change user settable mount flags in remount | mnt: Prevent pivot_root from creating a loop in the mount tree | vfs: read file_handle only once in handle_to_path | fs: take i_mutex during prepare_binprm for set[ug]id executables | android: drivers: workaround debugfs race in binder | net: add length argument to skb_copy_and_csum_datagram_iovec | md: use kzalloc() when bitmap is disabled | KEYS: Fix handling of stored error in a negatively instantiated user key | vfs: new internal helper: mnt_has_parent(mnt) | vfs: more mnt_parent cleanups | Staging: android: binder: Add some tracepoints | Revert "udp: remove redundant variable" | fuse: break infinite loop in fuse_fill_write_pages() | pipe: iovec: Fix memory corruption when retrying atomic copy as non-atomic | input: Don't use monotonic time for event time stamps. | Input: add infrastructure for selecting clockid for event time stamps | mfc5x: update from n7100 source drop | pipe: Fix buffer offset after partially failed read | agni control installed as system app
  • 19-04-2016 Update v4.5.3 (Stock-sources based)
    i930x: disable samsung_extdisp driver to fix CVE-2015-1801 | remove touchwake charger mode | mfc5x: enable SUPPORT_SLICE_ENCODING only for AGNi pureSTOCK | remove the experimental ondemand control stuff




NOTE: Kernels will set SELINUX PERMISSIVE

MY MODIFIED F2FS supported recovery :

TWRP v2.7.0 Modified : added f2fs support.
DOWNLOAD PAGE

TWRP formats partitons to same filesystem as they were previously on, so to format from ext4 to f2fs or the other way round, u have to use these tools altleast once.

F2FS Format tools : LINK
EXT4 Format tools : LINK
WARNING: Formating /data with above format tools will wipe your entire internal storage in a single shot, so backup first


About LZ4 compression/decompression:
LZ4 is a very fast lossless compression algorithm, providing compression speed at 300 MB/s per core, scalable with multi-cores CPU. It also features an extremely fast decoder, with speed in GB/s per core, typically reaching RAM speed limits on multi-core systems.
ADVANTAGE OF LZ4 OVER SNAPPY = More BLAZING FAST speed with almost same marginal cpu usage for Zram




DOWNLOADS:-

DOWNLOAD v2.8.9+
DOWNLOAD v2.8.5
DOWNLOAD v2.8.5 R4P0_NAMELESS
DOWNLOADS (v2.6a+)
DOWNLOAD (v2.5e CM11)
DOWNLOAD (v2.5 CM10.2 SUPPORTED)


XDA:DevDB Information
AGNi Kernel, Kernel for the Samsung Galaxy Note II

Contributors
psndna88
Source Code: https://github.com/psndna88/AGNI-pureCM

Kernel Special Features: Based on Cyanogenmod smdk4x12 Sources, upstreamed to 3.0.101 with selected picked mods/patches to be near to stock as possible.

Version Information
Status: Stable

Created 2014-01-18
Last Updated 2016-05-19
The Following 80 Users Say Thank You to psndna88 For This Useful Post: [ View ] Gift psndna88 Ad-Free
 
 
9th June 2013, 11:30 AM |#2  
psndna88's Avatar
OP Recognized Contributor
Flag Mumbai
Thanks Meter: 13,739
 
Donate to Me
More
CREDITS

CM TEAM
[ADI & TEAM]
andreilux
AndiP for Boeffla App and other works
Yank555 for support
The Following 9 Users Say Thank You to psndna88 For This Useful Post: [ View ] Gift psndna88 Ad-Free
9th June 2013, 11:31 AM |#3  
psndna88's Avatar
OP Recognized Contributor
Flag Mumbai
Thanks Meter: 13,739
 
Donate to Me
More
reserved
The Following 7 Users Say Thank You to psndna88 For This Useful Post: [ View ] Gift psndna88 Ad-Free
9th June 2013, 06:19 PM |#5  
psndna88's Avatar
OP Recognized Contributor
Flag Mumbai
Thanks Meter: 13,739
 
Donate to Me
More
Quote:
Originally Posted by simahu

144kb?

will reupload the kernel. thats an addon
optional script
Sent from I9300 PureLook HD v6.1 XXEMD2 4.1.2 + AGNi pureSTOCK v2.2.1 kernel
The Following 2 Users Say Thank You to psndna88 For This Useful Post: [ View ] Gift psndna88 Ad-Free
10th June 2013, 09:32 AM |#7  
psndna88's Avatar
OP Recognized Contributor
Flag Mumbai
Thanks Meter: 13,739
 
Donate to Me
More
recompiled and reuploaded !
The Following 4 Users Say Thank You to psndna88 For This Useful Post: [ View ] Gift psndna88 Ad-Free
11th June 2013, 01:42 AM |#8  
Blackfyre's Avatar
Senior Member
Thanks Meter: 279
 
More
Thumbs up
Great job! This Kernel is running super smooth, battery life is great (much better than others kernel's I've used, even though it's running at 1.8Ghz) and the internet usage seems faster (I've been using it for five hours so far with the Avatar Rom, haven't encountered any problems yet). Ran through some benchmarks and I'm pleased with the scores (Geekbench 2 = 2400, 3DMark = Basic = 4100, Antutu = 19500).

Please add support for GPU overclocking! Have a look at the uNeak Engine in the Android Original section of the forum. It allows GPU overclocking but you can't do any CPU overclocking. You'd be the first to provide the best of both worlds on the LTE VERSION and I'm sure it will get you many hits here. Good luck and thank you.
The Following User Says Thank You to Blackfyre For This Useful Post: [ View ] Gift Blackfyre Ad-Free
11th June 2013, 03:21 AM |#9  
Senior Member
Thanks Meter: 37
 
More
Quote:
Originally Posted by electroking

Great job! This Kernel is running super smooth, battery life is great (much better than others kernel's I've used, even though it's running at 1.8Ghz) and the internet usage seems faster (I've been using it for five hours so far with the Avatar Rom, haven't encountered any problems yet). Ran through some benchmarks and I'm pleased with the scores (Geekbench 2 = 2400, 3DMark = Basic = 4100, Antutu = 19500).

Please add support for GPU overclocking! Have a look at the uNeak Engine in the Android Original section of the forum. It allows GPU overclocking but you can't do any CPU overclocking. You'd be the first to provide the best of both worlds on the LTE VERSION and I'm sure it will get you many hits here. Good luck and thank you.

this kernel have gpu oc to 700mhz use trickster mod to make the changes
The Following User Says Thank You to YamazakiRobert For This Useful Post: [ View ] Gift YamazakiRobert Ad-Free
11th June 2013, 05:18 AM |#10  
Blackfyre's Avatar
Senior Member
Thanks Meter: 279
 
More
Quote:
Originally Posted by hacker.newage

this kernel have gpu oc to 700mhz use trickster mod to make the changes

No it does not, it is there, but changes to those values make absolutely no CHANGES in Benchmarking scores, if you use the uNeak Engine, which is the only one that was successful at REALLY overclocking your GPU, you'll see AMAZING and drastic changes to your benchmark SCORES! Especially with 3DMARK (Getting scores of 4500+ without even overclocking the CPU)...

If you run KERNEL TWEAKER (Download from Play Store) and run it, tap the MENU button on your phone and click on compatibility check you will see it does NOT support GPU 3D or 2D overclocking.

Test it for yourself, run 3DMark, then overclock the values using Trickster Moderator and see if anything really changes, then try it with the uNeak Kernel and their APP on the store to overclock and you'll see what I mean.
The Following User Says Thank You to Blackfyre For This Useful Post: [ View ] Gift Blackfyre Ad-Free
11th June 2013, 05:44 AM |#11  
Senior Member
Thanks Meter: 37
 
More
Quote:
Originally Posted by electroking

....Test it for yourself, run 3DMark, then overclock the values using Trickster Moderator and see if anything really changes, then try it with the uNeak Kernel and their APP on the store to overclock and you'll see what I mean.

what version are you using the autooc or oc?
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes