FORUMS
Remove All Ads from XDA

UNbrick Motorola Razr XT910S/K

11 posts
Thanks Meter: 6
 
By kraven234, Junior Member on 21st July 2013, 03:43 PM
Post Reply Email Thread
this community help me a lot and it is my time to help.
Its works whit XT910 Korean Retail (S/K).
It is my first post so i can not post links, so remove spaces.

Extract from here: xt910ks.blogspot.com.ar
Archives:
Motorola Drivers and RSD >5.9 : No links,please google
Tool erase the CID & Root: w w w .me diafire .com/?6e1prdc0cq6eraq
Firmware 4.0.4: w w w .droi deve lop ers.com/dow nloads.php?do =file&id=1407 (need free register)
Update: www .med iafire .com/?7s2e953kuka1xa9

Step 1: Erase CID
Put XT910 in Fastboot Mode: Volume up + Volume down + Power
Press volume down to Fastboot and then volume up to select
Conect to pc and install drivers
Decompress "Xoa CID & Root.rar", Find "Xoa CID" folder and double click on "run.bat" and the others 3 .bat files
Step 2: FLash Firmware
Put in Fastboot again, open RSD Lite annd select "SPYDERIRD_U.01.6.7.3-94_SPI-324_04.11.01P_0A.74_ASIA_RETAIL_HKTW_CFC_HWp2b_SIG NED.xml.zip" archive (firmware 4.0.4)
if the flash process fails means that CID is not deleted, back to step 1
After finish all task whitout errors, reboot cellphone, press Volume up, volume down and Power, and selet "BP Tools"
wait boot correctly, aprox 1~2 min
Put the update in SD Card, and turn off
Boot in recovery mode: Volume down+volume up+Power, and select recovery
When appear Android logo press volume up+ volume down quickly,
Do a full wipe
select install zip from sd card, and select "Blur_Version.673.94.328.XT910.AsiaRetail.en.03.zi p" archive.
wait to terminate
Full wipe again
Reboot and select BP tools again
Step 3 Fix Boot + Mass Storage:
Activate "USB Debugging" and plug to pc, find the root folder from "Xoa CID & Root.rar" archive and extract,
then run "EasyRootICS_Windows.bat"
cellphone will reboot 3 time, remember to boot in "BP Tools" always,
when done, run EasyRootICS_Apps.bat to install apps
in Cellphon Run Boot Menu Manager, install Hjihack, in 1st system turn on the first 2 items,
now restart, and after 3 seconds the cellphone will pass costumer id error and boot properly.

Tested on my XT910S.
Regards from Argentina!
The Following 6 Users Say Thank You to kraven234 For This Useful Post: [ View ] Gift kraven234 Ad-Free
 
 
17th August 2013, 05:49 PM |#2  
Junior Member
Thanks Meter: 0
 
More
hola, al telefono puede ponerse cualquier firm despues de hacer esto? Queda identico a un nuevo?
18th August 2013, 04:13 PM |#3  
AztekSoul's Avatar
Senior Member
Flag Monterrey
Thanks Meter: 92
 
More
Quote:
Originally Posted by jmm18

hola, al telefono puede ponerse cualquier firm despues de hacer esto? Queda identico a un nuevo?


You wont get much help posting in spanish in this community, this is a english only forum,but to answer your question, yes you will have a fresh stock rom and you can flash any firmware with an erased CID.

Sent from my XT910 using xda premium
18th August 2013, 05:29 PM |#4  
Junior Member
Thanks Meter: 0
 
More
Quote:
Originally Posted by AztekSoul

You wont get much help posting in spanish in this community, this is a english only forum,but to answer your question, yes you will have a fresh stock rom and you can flash any firmware with an erased CID.

Sent from my XT910 using xda premium

Thanks and sorry for spanish language
5th September 2013, 05:47 PM |#5  
Junior Member
Thanks Meter: 0
 
More
During flashing it keeps coming up with fail at the step 6. I have been redoing step 1 for several times, but no luck. Any advice?
12th September 2013, 09:25 PM |#6  
nijom's Avatar
Senior Member
Flag Chennai
Thanks Meter: 279
 
Donate to Me
More
I am booting with BT Tools option. Else it wont get inside, also shows Customer ID error.

Sent from my AUXUS Nuclea N1 using xda app-developers app
13th September 2013, 04:25 PM |#7  
OP Junior Member
Thanks Meter: 6
 
More
hi!
Quote:
Originally Posted by jmm18

hola, al telefono puede ponerse cualquier firm despues de hacer esto? Queda identico a un nuevo?

si, despues de esto le puse el retail de brasil 4.1.2 y quedo de 10, eso si me costo rootearlo. Saludos

Quote:
Originally Posted by egons

During flashing it keeps coming up with fail at the step 6. I have been redoing step 1 for several times, but no luck. Any advice?

try whit another similar .bat file, and see if cid is deleted (this only work wiyh XT910S/K)

Quote:
Originally Posted by nijom

I am booting with BT Tools option. Else it wont get inside, also shows Customer ID error.

Sent from my AUXUS Nuclea N1 using xda app-developers app

try a full wipe again, or do all again from step 1, without flash "ota"
29th October 2013, 06:29 AM |#8  
Junior Member
Thanks Meter: 2
 
More
One more tip...
Quote:
Originally Posted by kraven234

this community help me a lot and it is my time to help.
Its works whit XT910 Korean Retail (S/K).
It is my first post so i can not post links, so remove spaces.

Extract from here: xt910ks.blogspot.com.ar
Archives:
Motorola Drivers and RSD >5.9 : No links,please google
Tool erase the CID & Root: w w w .me diafire .com/?6e1prdc0cq6eraq
Firmware 4.0.4: w w w .droi deve lop ers.com/dow nloads.php?do =file&id=1407 (need free register)
Update: www .med iafire .com/?7s2e953kuka1xa9

Step 1: Erase CID
Put XT910 in Fastboot Mode: Volume up + Volume down + Power
Press volume down to Fastboot and then volume up to select
Conect to pc and install drivers
Decompress "Xoa CID & Root.rar", Find "Xoa CID" folder and double click on "run.bat" and the others 3 .bat files
Step 2: FLash Firmware
Put in Fastboot again, open RSD Lite annd select "SPYDERIRD_U.01.6.7.3-94_SPI-324_04.11.01P_0A.74_ASIA_RETAIL_HKTW_CFC_HWp2b_SIG NED.xml.zip" archive (firmware 4.0.4)
if the flash process fails means that CID is not deleted, back to step 1
After finish all task whitout errors, reboot cellphone, press Volume up, volume down and Power, and selet "BP Tools"
wait boot correctly, aprox 1~2 min
Put the update in SD Card, and turn off
Boot in recovery mode: Volume down+volume up+Power, and select recovery
When appear Android logo press volume up+ volume down quickly,
Do a full wipe
select install zip from sd card, and select "Blur_Version.673.94.328.XT910.AsiaRetail.en.03.zi p" archive.
wait to terminate
Full wipe again
Reboot and select BP tools again
Step 3 Fix Boot + Mass Storage:
Activate "USB Debugging" and plug to pc, find the root folder from "Xoa CID & Root.rar" archive and extract,
then run "EasyRootICS_Windows.bat"
cellphone will reboot 3 time, remember to boot in "BP Tools" always,
when done, run EasyRootICS_Apps.bat to install apps
in Cellphon Run Boot Menu Manager, install Hjihack, in 1st system turn on the first 2 items,
now restart, and after 3 seconds the cellphone will pass costumer id error and boot properly.

Tested on my XT910S.
Regards from Argentina!

Useful tip for whom are going to do this (Especially for whom live in Korea):

Removing CID without backup is no good choice. It's kinda emergency treatment.

If you don't need your phone right now or have enough time to visit any Motorola Service Center nearby your place, then go to there.

Even though servicing varies around service centers (it means some engineers don't know how to restore), Most engineers may restore your phone right at the time. They have fastboots for SKT and KT. (Because you HAVE your own CID at this time.) It costs around 8000 ~ 20000 KRW ( $8 ~ $20). But you may keep it safely.

Good luck with RAZR.

P.S. I wiped out my cid without backups. :P
1st November 2013, 07:59 PM |#9  
Junior Member
Thanks Meter: 0
 
More
Quote:
Originally Posted by nidev

Useful tip for whom are going to do this (Especially for whom live in Korea):

Removing CID without backup is no good choice. It's kinda emergency treatment.

If you don't need your phone right now or have enough time to visit any Motorola Service Center nearby your place, then go to there.

Even though servicing varies around service centers (it means some engineers don't know how to restore), Most engineers may restore your phone right at the time. They have fastboots for SKT and KT. (Because you HAVE your own CID at this time.) It costs around 8000 ~ 20000 KRW ( $8 ~ $20). But you may keep it safely.

Good luck with RAZR.

P.S. I wiped out my cid without backups. :P

I have deleted CID. Only fastboot working was 9.8.2O-124_SPUEM-14_S7_USASPDRICS01RTFE1007.0R_USASPDRJBRTFR_P013_A 014_p2b_S1FF_fb_CFC.xml. I am on 982.124.14.XT910.Retail.en.FR version now. What am I supposed to do now? Any advice?
2nd November 2013, 07:31 AM |#10  
Junior Member
Thanks Meter: 0
 
More
Customer ID error
Hi, in my case this unfortunatelly resulted in Customer ID error. Whats more, i am not able to get to boot menu any more.
12th November 2013, 04:55 AM |#11  
Junior Member
Thanks Meter: 0
 
More
Quote:
Originally Posted by kraven234

this community help me a lot and it is my time to help.
Its works whit XT910 Korean Retail (S/K).
It is my first post so i can not post links, so remove spaces.

Extract from here: xt910ks.blogspot.com.ar
Archives:
Motorola Drivers and RSD >5.9 : No links,please google
Tool erase the CID & Root: w w w .me diafire .com/?6e1prdc0cq6eraq
Firmware 4.0.4: w w w .droi deve lop ers.com/dow nloads.php?do =file&id=1407 (need free register)
Update: www .med iafire .com/?7s2e953kuka1xa9

Step 1: Erase CID
Put XT910 in Fastboot Mode: Volume up + Volume down + Power
Press volume down to Fastboot and then volume up to select
Conect to pc and install drivers
Decompress "Xoa CID & Root.rar", Find "Xoa CID" folder and double click on "run.bat" and the others 3 .bat files
Step 2: FLash Firmware
Put in Fastboot again, open RSD Lite annd select "SPYDERIRD_U.01.6.7.3-94_SPI-324_04.11.01P_0A.74_ASIA_RETAIL_HKTW_CFC_HWp2b_SIG NED.xml.zip" archive (firmware 4.0.4)
if the flash process fails means that CID is not deleted, back to step 1
After finish all task whitout errors, reboot cellphone, press Volume up, volume down and Power, and selet "BP Tools"
wait boot correctly, aprox 1~2 min
Put the update in SD Card, and turn off
Boot in recovery mode: Volume down+volume up+Power, and select recovery
When appear Android logo press volume up+ volume down quickly,
Do a full wipe
select install zip from sd card, and select "Blur_Version.673.94.328.XT910.AsiaRetail.en.03.zi p" archive.
wait to terminate
Full wipe again
Reboot and select BP tools again
Step 3 Fix Boot + Mass Storage:
Activate "USB Debugging" and plug to pc, find the root folder from "Xoa CID & Root.rar" archive and extract,
then run "EasyRootICS_Windows.bat"
cellphone will reboot 3 time, remember to boot in "BP Tools" always,
when done, run EasyRootICS_Apps.bat to install apps
in Cellphon Run Boot Menu Manager, install Hjihack, in 1st system turn on the first 2 items,
now restart, and after 3 seconds the cellphone will pass costumer id error and boot properly.

Tested on my XT910S.
Regards from Argentina!

Guys I am completely desperate!
I have softbricked my XT910S Korean version and right now I was hoping to follow this instructions to recover the device but whatever I do I cant succeed.
I tried to remove CID but it always says "erasing 'cid' ... INFOcommand restricted failed" the rest OK
Next thing I tried all possible firmwares including SPYDERIRD_U.01.6.7.3-94_SPI-324_04.11.01P_0A.74_ASIA_RETAIL_HKTW_CFC_HWp2b_SIG NED.xml.zip but it just fails on step 6 flashing fail.

Please help or show me the rest direction how to get it done otherwise I'm gonna go insane. I have all installed drivers, cable, battery is charged and charging. (I am able to charge the phone but it dies very quickly which is strange.

IF you could please help with providing link to correct version of firmware. I'm not sure even how to check which firmware is correct for my phone.

Your help is really appreciated.
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes