[RECOVERY XT910] Safestrap Recovery v3.7x [05/15/2014 V3.73 - TWRP]

3,427 posts
Thanks Meter: 23,885
By Hashcode, Senior Recognized Developer on 31st August 2013, 10:30 AM
Post Reply Email Thread
SAFESTRAP v3.73 (2nd-System Bootstrap / Recovery) for XT910 UMTS_Spyder

ATTENTION: I will be stopping official Safestrap support on 9/1/2014. For more information please see:

** INSERT STANDARD DISCLAIMER: I'm not responsible for any damage you do to your phone using my tools. Always have a fastboot available for disaster recovery. **

Download the APK Installer:
Mirror 1:
Mirror 2: Crackflasher
[ DOUBLE-CHECK you have the "UMTS_Spyder" version ]

This is NOT BMM. I don't support the same features that BMM does. 2 different recoveries that work on the RAZR, use which ever you like.

  • Key/button vibration in recovery and MANY more updates
  • Screen saving in recovery. Can set the timeout under Advanced->Settings->Screen *Don't freak out of the screen is dark, try the power button.
  • SElinux support in recovery
  • and much much more.. check the TWRP changelog here:

  • [05/15] (3.73) Bugfix for dual SD card UMS mounting and pull in TWRP changes
  • [04/14] (3.72) Mostly other device updates
  • [01/15] (3.71) Code cleanup
  • [01/15] (3.71) Minor hijack updates
  • [12/18] (3.70) Mount cleanup during hijack / debugging output
  • [12/18] (3.70) Splashscreen: Instant stock boot key (needs to be set for Moto OMAP4's still)
  • [11/13] (3.65) recovery init.rc cleanup
  • [11/13] (3.65) fix updater build for cm 10.1 and 10.2
  • [09/20] (3.60) Better handling for virtual images > 2gb
  • [09/20] (3.60) Much improved block device handling
  • [09/20] (3.60) Bugfix in script translation
  • [09/20] (3.60) hijack / init.rc tweaks
  • [09/20] (3.60) update to TWRP base recovery
  • [09/06] (3.53) Fixed mass_storage in recovery (via Mount menu)
  • [09/06] (3.53) Added Webtop to partition backup list (optional)
  • [09/06] (3.53) New virtual systems created will be 640mb (got reset 600mb)
  • [09/06] (3.53) Fixed file selector when changing from internal to external storage (previously location wouldn't update)
  • [09/05] (3.52) added "Reboot to Recovery" in APK
  • [09/04] (3.51) Disabled screen blank while creating a rom-slot
  • [09/04] (3.51) Fixed openrecovery script processing for stock slot to re-inject hijack after .zip install (cmupdater on stock now works)
  • [08/30] (3.50) If running a new CM10.1/CM10.2 ROM (08/30 or later) you *should* be able to install Safestrap and update the recovery w/o having to go back to stock. If Safestrap shows "recovery not installed" while you're on a ROM-slot, then that ROM hasn't been updated and it won't work. Swap back to stock ROM and update Safestrap from there.
  • [08/30] (3.50) Worked on stock ROM flashing and *should* work with CM10.1/CM10.2 builds on or after 08/30 *WILL NOT WORK WITH OLDER ROMs.*
  • [08/30] (3.50) Battery meter is back
  • [08/30] (3.50) Updated TWRP theme
  • [08/30] (3.50) Added partition sizes to ROM-slot screen when it's ACTIVE
  • [08/30] (3.50) Added "Check FS" function to ROM-slot screen when it's ACTIVE
  • [08/30] (3.50) Complete re-write against TWRP 2.6 base (up from version TWRP changelog for reference
  • [12/29] (3.11) Allow use of custom updater-binary in .zip files for flashing on stock ROM (virtual slots still use prebuilt updater-binary in recovery).
  • [12/29] (3.11) BUGFIX: Fixed fake flash error at the end of a .zip install. (No real error, .zip installs fine)
  • [12/29] (3.10) Early support for booting custom ROMs on stock partitions. (Custom ROMs will need to be worked out for XT912 on JB4.1 still)
  • [12/29] (3.10) Enable flashing to stock ROM
    • After .zip installations, nandroid restore or system wipe on the stock ROM: the current Safestrap files are restored to the system partition (Doesn't include the APK in /data -- so if you're restoring an old backup, be sure to update the Safestrap APK)
    • During the Safestrap files restore a check is done to be sure there are minimal files on /system to re-enter Safestrap
  • [12/29] (3.10) New virtual system partitions will be 640mb (closer match to stock RAZR/D4)
  • [12/27] (3.07) Bugfix: missed some changes in Safestrap 3.06
  • [12/26] (3.06) Bugfix/Update for JB4.1 OTA for DroidRAZR (Non-JB devices can also use)
  • [10/17] (3.05) Fixed SD card / emmc sharing in recovery (UMS)
  • [10/17] (3.05) Fixed recovery installation/removal from ROM-slots
  • [10/14] Updated to v3.04 BETA.
  • [10/14] Recovery is now based off TWRP (fully featured touch-based recovery)
  • [10/14] Can create up to 4 Virtual ROM-slots to flash ROMs to and when "Active" ALL TWRP functions affect that ROM-slot (For example: Flashing .zips, Backup and Restore)
  • [10/14] Nearly instant swapping from ROM to ROM
  • [10/14] User selectable data partition sizes during ROM slot creation: 1GB, 2GB or 3GB
  • [10/14] ROM slots are saved on the internal emmc space so that preinstall and webtop partitions are no longer used and shouldn't break OTAs.
  • [10/14] Charging in recovery
  • [10/14] Supports "Reboot Recovery" from Android OS
Entry to recovery via Splashscreen on boot-up. The screen stays up for around 8-10 seconds and if you hit the menu button, it takes you to Safestrap Recovery.

  • The entire TWRP team who has built an AMAZING recovery system.
  • The testers which have helped in past and present versions of Safestrap, knowing that it could mean they brick their devices.
As always, let me know what you think!

SCREENSHOTS (showing slightly older TWRP base)
Attached Thumbnails
Click image for larger version

Name:	ss-3.50-01-main.jpg
Views:	12714
Size:	19.9 KB
ID:	2224802   Click image for larger version

Name:	ss-3.50-02-choose-romslot.jpg
Views:	10945
Size:	18.7 KB
ID:	2224803   Click image for larger version

Name:	ss-3.50-03-create-romslot.jpg
Views:	10552
Size:	19.6 KB
ID:	2224804  
The Following 53 Users Say Thank You to Hashcode For This Useful Post: [ View ]
31st August 2013, 11:18 AM |#2  
By.TRabZonLu™'s Avatar
Senior Member
Flag Bize Her Yer Trabzon
Thanks Meter: 317
Thaks , Motorola RAZR XT910 Will it work?

Download ? ;
31st August 2013, 11:34 AM |#3  
Thanks Meter: 9
Works great !
the installation from the rom slots is really useful by the way
31st August 2013, 01:55 PM |#5  
Jack'O's Avatar
Senior Member
Flag = banana republic
Thanks Meter: 828
Nice, except for the blank screen while building the slot it's great.
31st August 2013, 03:51 PM |#6  
Flag Belém
Thanks Meter: 11
Good job

Enviado de meu XT910 usando Tapatalk 4
31st August 2013, 05:50 PM |#7  
Senior Member
Thanks Meter: 631
testing with CM10.2 in the stock slot... works like a charm. You da man!
31st August 2013, 05:58 PM |#8  
hacker812c's Avatar
Senior Member
Flag Salvador
Thanks Meter: 1,131
Originally Posted by pepcisko

testing with CM10.2 in the stock slot... works like a charm. You da man!

Thanks Hashcode.
Works perfectly on cm10.1 stable.

I installed on cm10.1
After reboot activate stock slot
After this i install in stock rom
In this point recovery is installed

Hashcode congratulations for this...
31st August 2013, 07:30 PM |#9  
Senior Member
Thanks Meter: 75
Will it work with XT912?
31st August 2013, 07:38 PM |#10  
Senior Member
Flag Mini-Me
Thanks Meter: 85
Originally Posted by hd0120

Will it work with XT912?

no. for XT912:
direct link:
The Following User Says Thank You to tester5224 For This Useful Post: [ View ] Gift tester5224 Ad-Free
4th September 2013, 10:25 PM |#11  
By.TRabZonLu™'s Avatar
Senior Member
Flag Bize Her Yer Trabzon
Thanks Meter: 317
V3.51 update ?
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes