FORUMS

[A13 ROM JB 4.2.2 + DRIVERS] how to fix your tablet by modding drivers yourself.

282 posts
Thanks Meter: 299
 
Post Reply Email Thread

IMPORTANT NOTICE:

i will personally no longer be able to provide support on this rom although there are a few people on xda who will... so my support is officially dicontinued here on this thread... although i have developed a new tool and rom for the A13's and you can get it HERE i will be providing support for HERE..

EDIT: I have developed a new tool for the allwinner a13 to carry out most tasks involving editing scripts, touchscreen parameters and fixes etc.. you can find it HERE

FaaastJB v2.5
A13 Allwinner with Jelly Bean 4.2.2 by Toxicro

MAKE BACKUP - using ZeusToolKit

Caution: don't flash this on KB901 with TS ft5x_ts

Rebased the whole ROM on various builds of JB 4.2.2 to run smooth without tweaks:
- cleaned up
- rooted
- adb enabled by default
- replaced the default launcher with GO Launcher HD
- adapted to accept my custom modules TS

lsmod on default ROM:

device 26862 0 - Live 0x00000000
rtl8150 10305 0 - Live 0x00000000
mcs7830 7581 0 - Live 0x00000000
qf9700 9152 0 - Live 0x00000000
asix 24601 0 - Live 0x00000000
sun5i_csi0 34042 0 - Live 0x00000000
sp0838 19927 1 - Live 0x00000000
camera 53105 1 sun5i_csi0, Live 0x00000000
videobuf_dma_contig 6243 1 sun5i_csi0, Live 0x00000000
videobuf_core 20242 2 sun5i_csi0,videobuf_dma_contig, Live 0x00000000
cedarx 11869 0 - Live 0x00000000
mali 200007 29 - Live 0x00000000
ump 34213 11 mali, Live 0x00000000
nand 225000 8 - Live 0x00000000

Partitions on default ROM:

[email protected]:/ # busybox df -h
busybox df -h
Filesystem Size Used Available Use% Mounted on
tmpfs 176.8M 68.0K 176.7M 0% /dev
tmpfs 176.8M 0 176.8M 0% /mnt/asec
tmpfs 176.8M 0 176.8M 0% /mnt/obb
/dev/block/nandd 503.9M 398.1M 105.9M 79% /system
/dev/block/nande 1.2G 103.7M 1.1G 9% /data
/dev/block/nandh 315.0M 5.2M 309.8M 2% /cache
/dev/block/vold/93:72 1.1G 48.0K 1.1G 0% /mnt/sdcard
/dev/block/vold/93:72 1.1G 48.0K 1.1G 0% /mnt/secure/asec

[email protected]:/ # cat /proc/partitions
cat /proc/partitions
major minor #blocks name

93 0 16384 nanda
93 8 16384 nandb
93 16 32768 nandc
93 24 614400 nandd
93 32 1228800 nande
93 40 16384 nandf
93 48 32768 nandg
93 56 327680 nandh
93 64 262144 nandi
93 72 1171456 nandj

DOWNLOAD ROM:
- New Version v2.5 -
4shared.com - FaaastJB-v2.5
mediafire.com - FaaastJB-v2.5

- Old version v2-
4shared.com - FaaastJB-v2
mediafire.com - FaaastJB-v2

By default Touch Screen DON'T work

STEP BY STEP FOR INSTALLING TS MODULES:
You need to have ADB installed before proceed

1. Flash FaaastJB with Livesuit 1.11
2. Wait for tablet to boot and load
3. Connect your tablet to PC
4. Extract all content from TS MODULE archive to a directory
5. Execute run.bat
6. After press any key dialog the tablet will reboot
7. That's all folks

If you don't know what TS driver to use try Uberizer option k/22 and use command "lsmod" on original working ROM.
I recommend try all archives and test both TS and gsensor for better result, don't stop at the first working TS try more.

OLD TS from FaaastJB 4.1.1 don't work here

DOWNLOAD TS MODULE

Single TS MODULE
- ekt3632.ko aka elan
- gt811_ts.ko
- gt828_ts.ko+mc32x0.ko
- gt811_ts.ko+dmard06.ko
- gsl1680.ko
- ft5x_ts.ko
- goodix_touch.ko
- gslx680.ko+mxc622x.ko
- ssd253x-ts.ko+dmard06.ko
- gslx680.ko
- gsl1680.ko+dmard06.ko
- ft5x_ts.ko
- gt828_ts.ko+mxc622x.ko
- zet6221.ko
- ekt3632.ko aka elan
- ektf2k.ko aka ekt3632+mma7660
- ssd253x-ts.ko+dmard06.ko+mma7660.ko
- elan_ts+mxc622x
- goodix811.ko+mxc622x.ko
- ssd253x-ts.ko

USERS TS MODULE
- gls1680+dmard06+mc32x0 - Thx to meatsos
- mg8698s+mxc622x+sp0838 - Thx to leoZ
- gt828_ts+mma7660 - Thx to goosen999

Multiple TS MODULE
- ft5x_ts, goodix_touch, ssd253x-ts, zet622x, byd693x-ts, gt82x, gt811, pixcir_cxx, gslx680, st1536_ts, elan_ts+mxc622x
- ft5x_ts, goodix_ts, gslX680, nt11003+mxc32x0
- ft5x_ts, ssd253x-ts, gt811_ts, sitronix_i2c_touch+dmard06+mma7660
- ft5x_ts, goodix_touch, ssd253x-ts, zet622x, byd693x-ts, gt82x, gt811, pixcir_touch_811, gsl1680, st1536_ts+mxc622x
- aw5306_ts.ko-pixcir_ts.ko-gt811.ko-gsl168x.ko-sichuang.ko-ft5x_ts.ko+mma7660
- gt811_ts.ko-A13_gslX680.ko-ft5x_ts.ko+mxc622x
- S710TAB - ft5x_ts.ko-gt811.ko-gslX680.ko+mxc622x

SPECIAL TS MODULE
- Ainol Novo7 Legend
- Multiple TS/GS: gslX680-ft5x_ts-gt818_ts-gt811_ts-zet6221+bma250-mma7660-dmard06-mma8452-kxtik-mxc622x-afa750-mma865x-lis3dh-mc32x0 after you use this module you will need to reflash ROM again if not works.

If you have found a TS and have reverse axes or screenshift i recommend to use this tools or try TSCalibration
More application for calibration need more people to test and confirm is working Touch Recalibrate

If you have inverted gsensor you will need to edit this file /system/usr/gsensor.cfg look for your gsensor name and play with this:

gsensor_direct_x = false
gsensor_direct_y = true
gsensor_direct_z = false
gsensor_xy_revert = false


Camera sux anyway on this tablet so if you still want to work you will need to edit script.bin section [csi0_para]

Don't forgot to make BACKUP of default ROM
For backup i recommend Uberizer option i/3.

I recommend this ROM for people who don't have a working TS.

This devices can't be bricked but if you don't find the right ROM they don't work correctly so if you don't know what your doing don't try it.
I recommend this ROM for people who don't have a working TS.

Thanks goes to Toxicro @ Techknow Forums for this rom this is his work..
The Following 18 Users Say Thank You to Inside 4ndroid For This Useful Post: [ View ] Gift Inside 4ndroid Ad-Free
6th November 2013, 09:38 PM |#2  
lauri_ylonen's Avatar
Senior Member
hannover
Thanks Meter: 14
 
More
Quote:
Originally Posted by Inside 4ndroid

FaaastJB v2.5
A13 Allwinner with Jelly Bean 4.2.2 by Toxicro

MAKE BACKUP - using Uberizer option i/3

Caution: don't flash this on KB901 with TS ft5x_ts

Rebased the whole ROM on various builds of JB 4.2.2 to run smooth without tweaks:
- cleaned up
- rooted
- adb enabled by default
- replaced the default launcher with GO Launcher HD
- adapted to accept my custom modules TS

lsmod on default ROM:




device 26862 0 - Live 0x00000000
rtl8150 10305 0 - Live 0x00000000
mcs7830 7581 0 - Live 0x00000000
qf9700 9152 0 - Live 0x00000000
asix 24601 0 - Live 0x00000000
sun5i_csi0 34042 0 - Live 0x00000000
sp0838 19927 1 - Live 0x00000000
camera 53105 1 sun5i_csi0, Live 0x00000000
videobuf_dma_contig 6243 1 sun5i_csi0, Live 0x00000000
videobuf_core 20242 2 sun5i_csi0,videobuf_dma_contig, Live 0x00000000
cedarx 11869 0 - Live 0x00000000
mali 200007 29 - Live 0x00000000
ump 34213 11 mali, Live 0x00000000
nand 225000 8 - Live 0x00000000

Partitions on default ROM:

[email protected]:/ # busybox df -h
busybox df -h
Filesystem Size Used Available Use% Mounted on
tmpfs 176.8M 68.0K 176.7M 0% /dev
tmpfs 176.8M 0 176.8M 0% /mnt/asec
tmpfs 176.8M 0 176.8M 0% /mnt/obb
/dev/block/nandd 503.9M 398.1M 105.9M 79% /system
/dev/block/nande 1.2G 103.7M 1.1G 9% /data
/dev/block/nandh 315.0M 5.2M 309.8M 2% /cache
/dev/block/vold/93:72 1.1G 48.0K 1.1G 0% /mnt/sdcard
/dev/block/vold/93:72 1.1G 48.0K 1.1G 0% /mnt/secure/asec

[email protected]:/ # cat /proc/partitions
cat /proc/partitions
major minor #blocks name

93 0 16384 nanda
93 8 16384 nandb
93 16 32768 nandc
93 24 614400 nandd
93 32 1228800 nande
93 40 16384 nandf
93 48 32768 nandg
93 56 327680 nandh
93 64 262144 nandi
93 72 1171456 nandj

DOWNLOAD ROM:
- New Version v2.5 -
4shared.com - FaaastJB-v2.5
mediafire.com - FaaastJB-v2.5

- Old version v2-
4shared.com - FaaastJB-v2
mediafire.com - FaaastJB-v2

By default Touch Screen DON'T work

STEP BY STEP FOR INSTALLING TS MODULES:
You need to have ADB installed before proceed

1. Flash FaaastJB with Livesuit 1.11
2. Wait for tablet to boot and load
3. Connect your tablet to PC
4. Extract all content from TS MODULE archive to a directory
5. Execute run.bat
6. After press any key dialog the tablet will reboot
7. That's all folks

If you don't know what TS driver to use try Uberizer option k/22 and use command "lsmod" on original working ROM.
I recommend try all archives and test both TS and gsensor for better result, don't stop at the first working TS try more.

OLD TS from FaaastJB 4.1.1 don't work here

DOWNLOAD TS MODULE

Single TS MODULE
- ekt3632.ko aka elan
- gt811_ts.ko
- gt828_ts.ko+mc32x0.ko
- gt811_ts.ko+dmard06.ko
- gsl1680.ko
- ft5x_ts.ko
- goodix_touch.ko
- gslx680.ko+mxc622x.ko
- ssd253x-ts.ko+dmard06.ko
- gslx680.ko
- gsl1680.ko+dmard06.ko
- ft5x_ts.ko
- gt828_ts.ko+mxc622x.ko
- zet6221.ko
- ekt3632.ko aka elan
- ektf2k.ko aka ekt3632+mma7660
- ssd253x-ts.ko+dmard06.ko+mma7660.ko
- elan_ts+mxc622x
- goodix811.ko+mxc622x.ko
- ssd253x-ts.ko

USERS TS MODULE
- gls1680+dmard06+mc32x0 - Thx to meatsos
- mg8698s+mxc622x+sp0838 - Thx to leoZ
- gt828_ts+mma7660 - Thx to goosen999

Multiple TS MODULE
- ft5x_ts, goodix_touch, ssd253x-ts, zet622x, byd693x-ts, gt82x, gt811, pixcir_cxx, gslx680, st1536_ts, elan_ts+mxc622x
- ft5x_ts, goodix_ts, gslX680, nt11003+mxc32x0
- ft5x_ts, ssd253x-ts, gt811_ts, sitronix_i2c_touch+dmard06+mma7660
- ft5x_ts, goodix_touch, ssd253x-ts, zet622x, byd693x-ts, gt82x, gt811, pixcir_touch_811, gsl1680, st1536_ts+mxc622x
- aw5306_ts.ko-pixcir_ts.ko-gt811.ko-gsl168x.ko-sichuang.ko-ft5x_ts.ko+mma7660
- gt811_ts.ko-A13_gslX680.ko-ft5x_ts.ko+mxc622x
- S710TAB - ft5x_ts.ko-gt811.ko-gslX680.ko+mxc622x

SPECIAL TS MODULE
- Ainol Novo7 Legend
- Multiple TS/GS: gslX680-ft5x_ts-gt818_ts-gt811_ts-zet6221+bma250-mma7660-dmard06-mma8452-kxtik-mxc622x-afa750-mma865x-lis3dh-mc32x0 after you use this module you will need to reflash ROM again if not works.

If you have found a TS and have reverse axes or screenshift i recommend to use this tools or try TSCalibration
More application for calibration need more people to test and confirm is working Touch Recalibrate

If you have inverted gsensor you will need to edit this file /system/usr/gsensor.cfg look for your gsensor name and play with this:

gsensor_direct_x = false
gsensor_direct_y = true
gsensor_direct_z = false
gsensor_xy_revert = false


Camera sux anyway on this tablet so if you still want to work you will need to edit script.bin section [csi0_para]

Don't forgot to make BACKUP of default ROM
For backup i recommend Uberizer option i/3.

I recommend this ROM for people who don't have a working TS.

This devices can't be bricked but if you don't find the right ROM they don't work correctly so if you don't know what your doing don't try it.
I recommend this ROM for people who don't have a working TS.

Thanks goes to Toxicro @ Techknow Forums for this rom this is his work..


how find what drvier TS or Gsensor???
22nd November 2013, 06:20 AM |#3  
Member
Thanks Meter: 4
 
More
needhelp here...
Quote:
Originally Posted by Inside 4ndroid

FaaastJB v2.5
A13 Allwinner with Jelly Bean 4.2.2 by Toxicro

MAKE BACKUP - using Uberizer option i/3

Caution: don't flash this on KB901 with TS ft5x_ts

Rebased the whole ROM on various builds of JB 4.2.2 to run smooth without tweaks:
- cleaned up
- rooted
- adb enabled by default
- replaced the default launcher with GO Launcher HD
- adapted to accept my custom modules TS

lsmod on default ROM:

device 26862 0 - Live 0x00000000
rtl8150 10305 0 - Live 0x00000000
mcs7830 7581 0 - Live 0x00000000
qf9700 9152 0 - Live 0x00000000
asix 24601 0 - Live 0x00000000
sun5i_csi0 34042 0 - Live 0x00000000
sp0838 19927 1 - Live 0x00000000
camera 53105 1 sun5i_csi0, Live 0x00000000
videobuf_dma_contig 6243 1 sun5i_csi0, Live 0x00000000
videobuf_core 20242 2 sun5i_csi0,videobuf_dma_contig, Live 0x00000000
cedarx 11869 0 - Live 0x00000000
mali 200007 29 - Live 0x00000000
ump 34213 11 mali, Live 0x00000000
nand 225000 8 - Live 0x00000000

Partitions on default ROM:

[email protected]:/ # busybox df -h
busybox df -h
Filesystem Size Used Available Use% Mounted on
tmpfs 176.8M 68.0K 176.7M 0% /dev
tmpfs 176.8M 0 176.8M 0% /mnt/asec
tmpfs 176.8M 0 176.8M 0% /mnt/obb
/dev/block/nandd 503.9M 398.1M 105.9M 79% /system
/dev/block/nande 1.2G 103.7M 1.1G 9% /data
/dev/block/nandh 315.0M 5.2M 309.8M 2% /cache
/dev/block/vold/93:72 1.1G 48.0K 1.1G 0% /mnt/sdcard
/dev/block/vold/93:72 1.1G 48.0K 1.1G 0% /mnt/secure/asec

[email protected]:/ # cat /proc/partitions
cat /proc/partitions
major minor #blocks name

93 0 16384 nanda
93 8 16384 nandb
93 16 32768 nandc
93 24 614400 nandd
93 32 1228800 nande
93 40 16384 nandf
93 48 32768 nandg
93 56 327680 nandh
93 64 262144 nandi
93 72 1171456 nandj

DOWNLOAD ROM:
- New Version v2.5 -
4shared.com - FaaastJB-v2.5
mediafire.com - FaaastJB-v2.5

- Old version v2-
4shared.com - FaaastJB-v2
mediafire.com - FaaastJB-v2

By default Touch Screen DON'T work

STEP BY STEP FOR INSTALLING TS MODULES:
You need to have ADB installed before proceed

1. Flash FaaastJB with Livesuit 1.11
2. Wait for tablet to boot and load
3. Connect your tablet to PC
4. Extract all content from TS MODULE archive to a directory
5. Execute run.bat
6. After press any key dialog the tablet will reboot
7. That's all folks

If you don't know what TS driver to use try Uberizer option k/22 and use command "lsmod" on original working ROM.
I recommend try all archives and test both TS and gsensor for better result, don't stop at the first working TS try more.

OLD TS from FaaastJB 4.1.1 don't work here

DOWNLOAD TS MODULE

Single TS MODULE
- ekt3632.ko aka elan
- gt811_ts.ko
- gt828_ts.ko+mc32x0.ko
- gt811_ts.ko+dmard06.ko
- gsl1680.ko
- ft5x_ts.ko
- goodix_touch.ko
- gslx680.ko+mxc622x.ko
- ssd253x-ts.ko+dmard06.ko
- gslx680.ko
- gsl1680.ko+dmard06.ko
- ft5x_ts.ko
- gt828_ts.ko+mxc622x.ko
- zet6221.ko
- ekt3632.ko aka elan
- ektf2k.ko aka ekt3632+mma7660
- ssd253x-ts.ko+dmard06.ko+mma7660.ko
- elan_ts+mxc622x
- goodix811.ko+mxc622x.ko
- ssd253x-ts.ko

USERS TS MODULE
- gls1680+dmard06+mc32x0 - Thx to meatsos
- mg8698s+mxc622x+sp0838 - Thx to leoZ
- gt828_ts+mma7660 - Thx to goosen999

Multiple TS MODULE
- ft5x_ts, goodix_touch, ssd253x-ts, zet622x, byd693x-ts, gt82x, gt811, pixcir_cxx, gslx680, st1536_ts, elan_ts+mxc622x
- ft5x_ts, goodix_ts, gslX680, nt11003+mxc32x0
- ft5x_ts, ssd253x-ts, gt811_ts, sitronix_i2c_touch+dmard06+mma7660
- ft5x_ts, goodix_touch, ssd253x-ts, zet622x, byd693x-ts, gt82x, gt811, pixcir_touch_811, gsl1680, st1536_ts+mxc622x
- aw5306_ts.ko-pixcir_ts.ko-gt811.ko-gsl168x.ko-sichuang.ko-ft5x_ts.ko+mma7660
- gt811_ts.ko-A13_gslX680.ko-ft5x_ts.ko+mxc622x
- S710TAB - ft5x_ts.ko-gt811.ko-gslX680.ko+mxc622x

SPECIAL TS MODULE
- Ainol Novo7 Legend
- Multiple TS/GS: gslX680-ft5x_ts-gt818_ts-gt811_ts-zet6221+bma250-mma7660-dmard06-mma8452-kxtik-mxc622x-afa750-mma865x-lis3dh-mc32x0 after you use this module you will need to reflash ROM again if not works.

If you have found a TS and have reverse axes or screenshift i recommend to use this tools or try TSCalibration
More application for calibration need more people to test and confirm is working Touch Recalibrate

If you have inverted gsensor you will need to edit this file /system/usr/gsensor.cfg look for your gsensor name and play with this:

gsensor_direct_x = false
gsensor_direct_y = true
gsensor_direct_z = false
gsensor_xy_revert = false


Camera sux anyway on this tablet so if you still want to work you will need to edit script.bin section [csi0_para]

Don't forgot to make BACKUP of default ROM
For backup i recommend Uberizer option i/3.

I recommend this ROM for people who don't have a working TS.

This devices can't be bricked but if you don't find the right ROM they don't work correctly so if you don't know what your doing don't try it.
I recommend this ROM for people who don't have a working TS.

Thanks goes to Toxicro @ Techknow Forums for this rom this is his work..


hi there, thanks for this rom, i tried all of the ts driver, but nothing work. sorry but i dont know my default driver because before i installed diffrent rom on this tablet, that time i was not working so there is no chance of knowing the default driver, then i opened the back case, the only familliar name there is the allwinner tech a13 nothing more... so there is no indication of the ts driver, is there anyone can help me?
30th November 2013, 09:16 AM |#4  
Inside 4ndroid's Avatar
OP Senior Member
Flag Dewsbury
Thanks Meter: 299
 
Donate to Me
More
Quote:
Originally Posted by jh3ss

hi there, thanks for this rom, i tried all of the ts driver, but nothing work. sorry but i dont know my default driver because before i installed diffrent rom on this tablet, that time i was not working so there is no chance of knowing the default driver, then i opened the back case, the only familliar name there is the allwinner tech a13 nothing more... so there is no indication of the ts driver, is there anyone can help me?


there is not much you can do apart from to source more drivers and keep trying different ones until you get a working one... especially as you have no clue on what the modules were on the original firmware....
7th December 2013, 11:09 AM |#5  
rijuvanaero09's Avatar
Member
Flag Kumbakonam
Thanks Meter: 51
 
More
Smile Need Help for Camera
Hello Brothers.....


Camera problem may be due to camera lib files ... if it not working, we need to rewrite kernel for our allwinner a13 processor....


if anybody have kernel knowledge, pls do it..
12th December 2013, 07:23 PM |#6  
Junior Member
Thanks Meter: 1
 
More
Many-many-many THANKS for this ROM!
The Following User Says Thank You to CheSSteR For This Useful Post: [ View ] Gift CheSSteR Ad-Free
20th December 2013, 09:29 PM |#7  
Member
Flag Tel-Aviv
Thanks Meter: 17
 
Donate to Me
More
Unhappy Hello
I have a problem , my TS doesn't work :

lsmod data

8188eu 621112 0 - Live 0xbf2d1000
rtl8150 10305 0 - Live 0xbf2c4000
mcs7830 7581 0 - Live 0xbf2be000
qf9700 9152 0 - Live 0xbf2b7000
asix 24601 0 - Live 0xbf2ab000
sun5i_csi0 33355 0 - Live 0xbf29d000
gc0308 18608 1 - Live 0xbf294000
camera 61054 1 sun5i_csi0, Live 0xbf280000
videobuf_dma_contig 6251 1 sun5i_csi0, Live 0xbf27b000
videobuf_core 20242 2 sun5i_csi0,videobuf_dma_contig, Live 0xbf271000
cedarx 9351 0 - Live 0xbf26a000
mali 115410 8 - Live 0xbf240000
ump 34349 19 mali, Live 0xbf231000
gslx680 1052023 0 - Live 0xbf106000
byd693x_ts 9094 0 - Live 0xbf0db000
zet622x 17751 0 - Live 0xbf0cd000
ssd253x_ts 21452 0 - Live 0xbf0ac000
goodix_touch 18280 0 - Live 0xbf0a3000
ft5x_ts 77026 0 - Live 0xbf074000
inet_ctp 2227 6 gslx680,byd693x_ts,zet622x,ssd253x_ts,goodix_touch ,ft5x_ts, Live 0xbf070000
mxc622x 6310 0 - Live 0xbf06a000
nand 225002 8 - Live 0xbf000000
2nd January 2014, 08:04 PM |#8  
Junior Member
Rome
Thanks Meter: 0
 
More
First link of Multiple TS MODULE don't work
http://www.4shared.com/rar/JBiFCtmb/2-solomonsam.html

However i have installed this ROM and i have installed
gslx680.ko+mxc622x.ko Module

The Touch seem to respond but is not calibrated
I have tried Touch Recalibrate and TSCalibration but the situation remane the same

These are my info on STOCK ROM (i have backuped it whit CWM...but after installed this rom i didn't have the recovery anymore so now i can't restore it because i don't have an OTG adapter for install the recovery on the tablet)

Code:
[email protected]:/ $ su
[email protected]:/ # lsmod
8188eu 621112 0 - Live 0xbf279000
8192cu 575431 0 - Live 0xbf1d1000
mxc622x 6310 0 - Live 0xbf1cb000
rtl8150 10305 0 - Live 0xbf1c4000
mcs7830 7581 0 - Live 0xbf1be000
qf9700 9152 0 - Live 0xbf1b7000
asix 24601 0 - Live 0xbf1ab000
sun5i_csi0 33355 0 - Live 0xbf19d000
gc0308 18608 1 - Live 0xbf194000
camera 61054 1 sun5i_csi0, Live 0xbf180000
videobuf_dma_contig 6251 1 sun5i_csi0, Live 0xbf17b000
videobuf_core 20242 2 sun5i_csi0,videobuf_dma_contig, Live 0xbf171000
cedarx 9351 0 - Live 0xbf16a000
mali 115330 8 - Live 0xbf140000
ump 34309 17 mali, Live 0xbf131000
gslx680 359718 0 - Live 0xbf0af000
pixcir_cxx 23546 0 - Live 0xbf0a4000
gt811 15930 0 - Live 0xbf09c000
byd693x_ts 9094 0 - Live 0xbf08d000
zet622x 17831 0 - Live 0xbf07f000
ssd253x_ts 21452 0 - Live 0xbf075000
ft5x02 61964 0 - Live 0xbf055000
inet_ctp 2227 7 gslx680,pixcir_cxx,gt811,byd693x_ts,zet622x,ssd253x_ts,ft5x02, Live 0xbf039000
nand 169582 8 - Live 0xbf000000
[email protected]:/ # getevetn -lp /dev/input/event0
sh: getevetn: not found
127|[email protected]:/ # getevent -lp /dev/input/event0
add device 1: /dev/input/event0
  name:     "sun4i-keyboard"
  events:
    KEY (0001): KEY_ESC               KEY_ENTER             KEY_HOME              KEY_VOLUMEDOWN
                KEY_VOLUMEUP          KEY_MENU              KEY_SEARCH         
  input props:
    <none>
[email protected]:/ # getevent -lp /dev/input/event1
add device 1: /dev/input/event1
  name:     "axp20-supplyer"
  events:
    KEY (0001): KEY_POWER
  input props:
    <none>
[email protected]:/ # getevent -lp /dev/input/event2
add device 1: /dev/input/event2
  name:     "mxc622x"
  events:
    ABS (0003): ABS_X                 : value 7, min -128, max 128, fuzz 0, flat 0, resolution 0
                ABS_Y                 : value 3, min -128, max 128, fuzz 0, flat 0, resolution 0
                ABS_Z                 : value 0, min -128, max 128, fuzz 0, flat 0, resolution 0
  input props:
    <none>
[email protected]:/ # getevent -lp /dev/input/event3
add device 1: /dev/input/event3
  name:     "gt811"
  events:
    ABS (0003): ABS_HAT0X             : value 0, min 0, max 0, fuzz 0, flat 0, resolution 0
                ABS_HAT1X             : value 0, min 0, max 0, fuzz 0, flat 0, resolution 0
                ABS_HAT2Y             : value 0, min 0, max 0, fuzz 0, flat 0, resolution 0
                ABS_HAT3X             : value 0, min 0, max 0, fuzz 0, flat 0, resolution 0
                ABS_DISTANCE          : value 0, min 0, max 0, fuzz 0, flat 0, resolution 0
                ABS_MT_TOUCH_MAJOR    : value 0, min 0, max 255, fuzz 0, flat 0, resolution 0
                ABS_MT_WIDTH_MAJOR    : value 0, min 0, max 255, fuzz 0, flat 0, resolution 0
                ABS_MT_POSITION_X     : value 0, min 0, max 800, fuzz 0, flat 0, resolution 0
                ABS_MT_POSITION_Y     : value 0, min 0, max 480, fuzz 0, flat 0, resolution 0
                ABS_MT_TRACKING_ID    : value 0, min 0, max 5, fuzz 0, flat 0, resolution 0
  input props:
    <none>
[email protected]:/ # getevent -lp /dev/input/event4
add device 1: /dev/input/event4
  name:     "gslx680"
  events:
    ABS (0003): ABS_MT_TOUCH_MAJOR    : value 0, min 0, max 255, fuzz 0, flat 0, resolution 0
                ABS_MT_WIDTH_MAJOR    : value 0, min 0, max 200, fuzz 0, flat 0, resolution 0
                ABS_MT_POSITION_X     : value 0, min 0, max 800, fuzz 0, flat 0, resolution 0
                ABS_MT_POSITION_Y     : value 0, min 0, max 480, fuzz 0, flat 0, resolution 0
                ABS_MT_TRACKING_ID    : value 0, min 0, max 11, fuzz 0, flat 0, resolution 0
  input props:
    <none>
[email protected]:/ #
ALSO ORIGINAL script.fex
Code:
[product]
version = "1.0"
machine = "A13-EVB-V1.0"

[target]
boot_clock = 1008
dcdc2_vol = 1400
dcdc3_vol = 1200
ldo2_vol = 3000
ldo3_vol = 3300
ldo4_vol = 3300
pll4_freq = 960
pll6_freq = 720
power_start = 0
storage_type = 0

[card_boot]
logical_start = 40960
sprite_gpio0 =

[pm_para]
standby_mode = 0

[card_boot0_para]
card_ctrl = 0
card_high_speed = 1
card_line = 4
sdc_d1 = port:PF00<2><1><default><default>
sdc_d0 = port:PF01<2><1><default><default>
sdc_clk = port:PF02<2><1><default><default>
sdc_cmd = port:PF03<2><1><default><default>
sdc_d3 = port:PF04<2><1><default><default>
sdc_d2 = port:PF05<2><1><default><default>

[twi_para]
twi_port = 0
twi_scl = port:PB00<2><1><default><default>
twi_sda = port:PB01<2><1><default><default>

[uart_para]
uart_debug_port = 0
uart_debug_tx = port:PG03<4><1><default><default>
uart_debug_rx = port:PG04<4><1><default><default>

[jtag_para]
jtag_enable = 0
jtag_ms = port:PF00<4><1><default><default>
jtag_ck = port:PF05<4><1><default><default>
jtag_do = port:PF03<4><1><default><default>
jtag_di = port:PF01<4><1><default><default>

[dram_para]
dram_baseaddr = 0x40000000
dram_clk = 432
dram_type = 3
dram_rank_num = 1
dram_chip_density = 2048
dram_io_width = 8
dram_bus_width = 16
dram_cas = 9
dram_zq = 0x7b
dram_odt_en = 0
dram_size = 512
dram_tpr0 = 0x42d899b7
dram_tpr1 = 0xa090
dram_tpr2 = 0x22a00
dram_tpr3 = 0x0
dram_tpr4 = 0x0
dram_tpr5 = 0x0
dram_emr1 = 0x4
dram_emr2 = 0x10
dram_emr3 = 0x0

[nand_para]
nand_used = 1
nand_we = port:PC00<2><default><default><default>
nand_ale = port:PC01<2><default><default><default>
nand_cle = port:PC02<2><default><default><default>
nand_ce1 = port:PC03<2><default><default><default>
nand_ce0 = port:PC04<2><default><default><default>
nand_nre = port:PC05<2><default><default><default>
nand_rb0 = port:PC06<2><default><default><default>
nand_rb1 = port:PC07<2><default><default><default>
nand_d0 = port:PC08<2><default><default><default>
nand_d1 = port:PC09<2><default><default><default>
nand_d2 = port:PC10<2><default><default><default>
nand_d3 = port:PC11<2><default><default><default>
nand_d4 = port:PC12<2><default><default><default>
nand_d5 = port:PC13<2><default><default><default>
nand_d6 = port:PC14<2><default><default><default>
nand_d7 = port:PC15<2><default><default><default>
nand_wp =
nand_ce2 =
nand_ce3 =
nand_ce4 =
nand_ce5 =
nand_ce6 =
nand_ce7 =
nand_spi =
nand_ndqs = port:PC19<2><default><default><default>
good_block_ratio = 0

[mali_para]
mali_used = 1
mali_clkdiv = 2

[twi0_para]
twi0_used = 1
twi0_scl = port:PB00<2><default><default><default>
twi0_sda = port:PB01<2><default><default><default>

[twi1_para]
twi1_used = 1
twi1_scl = port:PB15<2><default><default><default>
twi1_sda = port:PB16<2><default><default><default>

[twi2_para]
twi2_used = 1
twi2_scl = port:PB17<2><default><default><default>
twi2_sda = port:PB18<2><default><default><default>

[uart_para0]
uart_used = 0
uart_port = 0
uart_type = 2
uart_tx = port:PB19<2><1><default><default>
uart_rx = port:PB20<2><1><default><default>

[uart_para1]
uart_used = 0
uart_port = 1
uart_type = 2
uart_tx = port:PG03<4><1><default><default>
uart_rx = port:PG04<4><1><default><default>

[spi1_para]
spi_used = 0
spi_cs0 = port:PG09<2><default><default><default>
spi_cs1 = port:PG13<2><default><default><default>
spi_sclk = port:PG10<2><default><default><default>
spi_mosi = port:PG11<2><default><default><default>
spi_miso = port:PG12<2><default><default><default>

[spi2_para]
spi_used = 0
spi_cs0 = port:PE00<4><default><default><default>
spi_sclk = port:PE01<4><default><default><default>
spi_mosi = port:PB02<4><default><default><default>
spi_miso = port:PB03<4><default><default><default>

[rtp_para]
rtp_used = 0
rtp_screen_size = 5
rtp_regidity_level = 5
rtp_press_threshold_enable = 0
rtp_press_threshold = 0x1f40
rtp_sensitive_level = 0xf
rtp_exchange_x_y_flag = 0

[ctp_para]
ctp_boxchip_type = 2579
ctp_cob = 1
ctp_twi_id = 1
ctp0_used = 1
ctp0_name = "ft5x02"
ctp0_twi_addr = 56
ctp1_used = 0
ctp1_name = "Goodix-TS"
ctp1_twi_addr = 85
ctp2_used = 1
ctp2_name = "ssd253x-ts"
ctp2_twi_addr = 72
ctp2_ssd_type = 75801
ctp4_used = 1
ctp4_name = "zet622x-ts"
ctp4_twi_addr = 118
ctp5_used = 1
ctp5_name = "byd693x-ts"
ctp5_twi_addr = 82
ctp8_used = 0
ctp8_name = "gt82x"
ctp8_twi_addr = 93
ctp9_used = 1
ctp9_name = "gt811"
ctp9_twi_addr = 93
ctp10_used = 1
ctp10_name = "pixcir_cxx"
ctp10_twi_addr = 92
ctp12_used = 1
ctp12_name = "gslx680"
ctp12_twi_addr = 64
ctp12_gsl_type = 8602
ctp13_used = 1
ctp13_name = "sitronix_ts"
ctp13_twi_addr = 96
ctp19_used = 1
ctp19_name = "elan_ts"
ctp19_twi_addr = 20
ctp_screen_max_x = 800
ctp_screen_max_y = 480
ctp_revert_x_flag = 0
ctp_revert_y_flag = 0
ctp_exchange_x_y_flag = 0
ctp_int_port = port:PG11<6><default><default><default>
ctp_wakeup = port:PB03<1><default><default><1>
ctp_io_port = port:PG11<6><default><default><default>

[tkey_para]
tkey_used = 0
tkey_name = "hv_keypad"
tkey_twi_id = 2
tkey_twi_addr = 0x62
tkey_int =

[motor_para]
motor_used = 0
motor_shake =

[disp_init]
disp_init_enable = 1
disp_mode = 0
screen0_output_type = 1
screen0_output_mode = 4
screen1_output_type = 1
screen1_output_mode = 4
fb0_framebuffer_num = 2
fb0_format = 10
fb0_pixel_sequence = 0
fb0_scaler_mode_enable = 0
fb1_framebuffer_num = 2
fb1_format = 10
fb1_pixel_sequence = 0
fb1_scaler_mode_enable = 0

[lcd0_para]
lcd_used = 1
lcd_x = 800
lcd_y = 480
lcd_dclk_freq = 33
lcd_pwm_not_used = 0
lcd_pwm_ch = 0
lcd_pwm_freq = 10000
lcd_pwm_pol = 1
lcd_if = 0
lcd_hbp = 46
lcd_ht = 1055
lcd_vbp = 23
lcd_vt = 1050
lcd_hv_if = 0
lcd_hv_smode = 0
lcd_hv_s888_if = 0
lcd_hv_syuv_if = 0
lcd_hv_vspw = 0
lcd_hv_hspw = 0
lcd_lvds_ch = 0
lcd_lvds_mode = 0
lcd_lvds_bitwidth = 0
lcd_lvds_io_cross = 0
lcd_cpu_if = 0
lcd_frm = 1
lcd_io_cfg0 = 268435456
lcd_gamma_correction_en = 0
lcd_gamma_tbl_0 = 0x0
lcd_gamma_tbl_1 = 0x10101
lcd_gamma_tbl_255 = 0xffffff
lcd_bl_en_used = 1
lcd_bl_en = port:power1<1><0><default><1>
lcd_power_used = 1
lcd_power = port:power0<1><0><default><1>
lcd_pwm_used = 1
lcd_pwm = port:PB02<2><0><default><default>
lcd_gpio_0 =
lcd_gpio_1 =
lcd_gpio_2 =
lcd_gpio_3 =
lcdd0 = port:PD00<2><0><default><default>
lcdd1 = port:PD01<2><0><default><default>
lcdd2 = port:PD02<2><0><default><default>
lcdd3 = port:PD03<2><0><default><default>
lcdd4 = port:PD04<2><0><default><default>
lcdd5 = port:PD05<2><0><default><default>
lcdd6 = port:PD06<2><0><default><default>
lcdd7 = port:PD07<2><0><default><default>
lcdd8 = port:PD08<2><0><default><default>
lcdd9 = port:PD09<2><0><default><default>
lcdd10 = port:PD10<2><0><default><default>
lcdd11 = port:PD11<2><0><default><default>
lcdd12 = port:PD12<2><0><default><default>
lcdd13 = port:PD13<2><0><default><default>
lcdd14 = port:PD14<2><0><default><default>
lcdd15 = port:PD15<2><0><default><default>
lcdd16 = port:PD16<2><0><default><default>
lcdd17 = port:PD17<2><0><default><default>
lcdd18 = port:PD18<2><0><default><default>
lcdd19 = port:PD19<2><0><default><default>
lcdd20 = port:PD20<2><0><default><default>
lcdd21 = port:PD21<2><0><default><default>
lcdd22 = port:PD22<2><0><default><default>
lcdd23 = port:PD23<2><0><default><default>
lcdclk = port:PD24<2><0><default><default>
lcdde = port:PD25<2><0><default><default>
lcdhsync = port:PD26<2><0><default><default>
lcdvsync = port:PD27<2><0><default><default>

[tv_out_dac_para]
dac_used = 1
dac0_src = 0

[hdmi_para]
hdmi_used = 0

[csi0_para]
csi_used = 1
csi_mode = 0
csi_dev_qty = 2
csi_stby_mode = 1
csi_mname = "gc0308"
csi_twi_id = 2
csi_twi_addr = 0x42
csi_if = 0
csi_vflip = 0
csi_hflip = 0
csi_iovdd = ""
csi_avdd = ""
csi_dvdd = ""
csi_flash_pol = 1
csi_facing = 1
csi_mname_b = "gt2005"
csi_twi_id_b = 2
csi_twi_addr_b = 0x78
csi_if_b = 0
csi_vflip_b = 0
csi_hflip_b = 0
csi_iovdd_b = ""
csi_avdd_b = ""
csi_dvdd_b = ""
csi_flash_pol_b = 1
csi_facing_b = 0
csi_pck = port:PE00<3><default><default><default>
csi_ck = port:PE01<3><default><default><default>
csi_hsync = port:PE02<3><default><default><default>
csi_vsync = port:PE03<3><default><default><default>
csi_d0 = port:PE04<3><default><default><default>
csi_d1 = port:PE05<3><default><default><default>
csi_d2 = port:PE06<3><default><default><default>
csi_d3 = port:PE07<3><default><default><default>
csi_d4 = port:PE08<3><default><default><default>
csi_d5 = port:PE09<3><default><default><default>
csi_d6 = port:PE10<3><default><default><default>
csi_d7 = port:PE11<3><default><default><default>
csi_reset = port:power3<1><default><default><0>
csi_power_en = port:power2<1><default><default><1>
csi_stby = port:PB10<1><default><default><1>
csi_flash =
csi_af_en =
csi_reset_b = port:power3<1><default><default><0>
csi_power_en_b = port:power2<1><default><default><1>
csi_stby_b = port:PG03<1><default><default><1>
csi_flash_b =
csi_af_en_b =

[csi1_para]
csi_used = 0
csi_mode = 0
csi_dev_qty = 1
csi_stby_mode = 1
csi_mname = ""
csi_twi_id = 1
csi_twi_addr = 0xba
csi_if = 0
csi_vflip = 0
csi_hflip = 0
csi_iovdd = ""
csi_avdd = ""
csi_dvdd = ""
csi_flash_pol = 1
csi_mname_b = ""
csi_twi_id_b = 1
csi_twi_addr_b = 0x78
csi_if_b = 0
csi_vflip_b = 1
csi_hflip_b = 0
csi_iovdd_b = ""
csi_avdd_b = ""
csi_dvdd_b = ""
csi_flash_pol_b = 1
csi_reset =
csi_power_en =
csi_stby =
csi_flash =
csi_af_en =
csi_reset_b =
csi_power_en_b =
csi_stby_b =
csi_flash_b =
csi_af_en_b =

[camera_list_para]
camera_list_para_used = 1
hm2057 = 1
ov7670 = 0
gc0308 = 1
gt2005 = 1
hi704 = 1
sp0838 = 1
mt9m112 = 0
mt9m113 = 0
ov2655 = 0
hi253 = 0
gc0307 = 0
mt9d112 = 0
ov5640 = 0
gc2015 = 1
ov2643 = 0
gc0329 = 1
gc0309 = 1
tvp5150 = 0
s5k4ec = 0
ov5650_mv9335 = 0
siv121d = 0
gc2035 = 1
sp2518 = 1
gc0328 = 1

[mmc0_para]
sdc_used = 1
sdc_detmode = 1
bus_width = 4
sdc_d1 = port:PF00<2><1><2><default>
sdc_d0 = port:PF01<2><1><2><default>
sdc_clk = port:PF02<2><1><2><default>
sdc_cmd = port:PF03<2><1><2><default>
sdc_d3 = port:PF04<2><1><2><default>
sdc_d2 = port:PF05<2><1><2><default>
sdc_det = port:PG00<0><1><default><default>
sdc_use_wp = 0
sdc_wp =

[mmc1_para]
sdc_used = 0
sdc_detmode =
bus_width =
sdc_cmd =
sdc_clk =
sdc_d0 =
sdc_d1 =
sdc_d2 =
sdc_d3 =
sdc_det =
sdc_use_wp =
sdc_wp =

[mmc2_para]
sdc_used = 0
sdc_detmode = 3
bus_width = 4
sdc_cmd = port:PE08<4><1><2><default>
sdc_clk = port:PE09<4><1><2><default>
sdc_d0 = port:PE04<4><1><2><default>
sdc_d1 = port:PE05<4><1><2><default>
sdc_d2 = port:PE06<4><1><2><default>
sdc_d3 = port:PE07<4><1><2><default>
sdc_det =
sdc_use_wp = 0
sdc_wp =

[ms_para]
ms_used = 0
ms_bs =
ms_clk =
ms_d0 =
ms_d1 =
ms_d2 =
ms_d3 =
ms_det =

[keypad_para]
kp_used = 0
kp_in_size =
kp_out_size =
kp_in0 =
kp_in1 =
kp_in2 =
kp_in3 =
kp_in4 =
kp_in5 =
kp_in6 =
kp_in7 =
kp_out0 =
kp_out1 =
kp_out2 =
kp_out3 =
kp_out4 =
kp_out5 =
kp_out6 =
kp_out7 =

[usbc0]
usb_used = 1
usb_port_type = 2
usb_detect_type = 1
usb_id_gpio = port:PG02<0><1><default><default>
usb_det_vbus_gpio = port:PG01<0><0><default><default>
usb_drv_vbus_gpio = port:PG12<1><0><default><0>
usb_host_init_state = 0

[usbc1]
usb_used = 1
usb_port_type = 1
usb_detect_type = 0
usb_id_gpio =
usb_det_vbus_gpio =
usb_drv_vbus_gpio = port:PG11<1><0><default><0>
usb_host_init_state = 1

[usb_feature]
vendor_id = 6353
mass_storage_id = 1
adb_id = 2
manufacturer_name = "USB Developer"
product_name = "Android"
serial_number = "20080411"

[msc_feature]
vendor_name = "USB 2.0"
product_name = "USB Flash Driver"
release = 100
luns = 2

[gsensor_para]
gsensor_used = 1
gsensor_unuse_name =
gsensor_twi_id = 1
gsensor_twi_addr =
gsensor_int1 =
gsensor_int2 =

[gps_para]
gps_used = 0
gps_spi_id =
gps_spi_cs_num =
gps_lradc =
gps_clk =
gps_sign =
gps_mag =
gps_vcc_en =
gps_osc_en =
gps_rx_en =

[sdio_wifi_para]
sdio_wifi_used = 0
sdio_wifi_sdc_id =
sdio_wifi_mod_sel =

[usb_wifi_para]
usb_wifi_used = 1
usb_wifi_usbc_num = 1

[3g_para]
3g_used = 0
3g_name =
3g_usbc_num =
3g_on_off =
3g_reset =
3g_poweron =
3g_wakeup_out =
3g_wakeup_in =

[gy_para]
gy_used = 0
gy_twi_id = 1
gy_twi_addr = 0
gy_int1 =
gy_int2 =

[ls_para]
ls_used = 0
ls_name = "ltr501als"
ls_twi_id = 1
ls_twi_addr =
ls_int =

[compass_para]
compass_used = 0
compass_twi_id =
compass_twi_addr =
compass_int =

[bt_para]
bt_used = 0
bt_uart_id =
bt_mod_type =

[i2s_para]
i2s_used = 0
i2s_channel =
i2s_mclk =
i2s_bclk =
i2s_lrclk =
i2s_dout0 =
i2s_dout1 =
i2s_dout2 =
i2s_dout3 =
i2s_din =

[spdif_para]
spdif_used = 0
spdif_mclk =
spdif_dout =
spdif_din =

[audio_para]
audio_used = 1
capture_used = 1
audio_lr_change = 1
audio_pa_ctrl = port:PG10<1><default><default><0>

[ir_para]
ir_used = 0
ir0_rx = port:PB04<2><default><default><default>

[rtc_para]
rtc_used = 1
rtc_name = "pcf8563"
rtc_twi_id = 1
rtc_twi_addr = 81

[pmu_para]
pmu_used = 1
pmu_twi_addr = 52
pmu_twi_id = 0
pmu_irq_id = 0
pmu_battery_rdc = 100
pmu_battery_cap = 2600
pmu_init_chgcur = 600
pmu_earlysuspend_chgcur = 600
pmu_suspend_chgcur = 1000
pmu_resume_chgcur = 300
pmu_shutdown_chgcur = 1000
pmu_init_chgvol = 4200
pmu_init_chgend_rate = 15
pmu_init_chg_enabled = 1
pmu_init_adc_freq = 100
pmu_init_adc_freqc = 100
pmu_init_chg_pretime = 50
pmu_init_chg_csttime = 720
pmu_bat_para1 = 0
pmu_bat_para2 = 0
pmu_bat_para3 = 0
pmu_bat_para4 = 0
pmu_bat_para5 = 5
pmu_bat_para6 = 13
pmu_bat_para7 = 16
pmu_bat_para8 = 26
pmu_bat_para9 = 36
pmu_bat_para10 = 46
pmu_bat_para11 = 53
pmu_bat_para12 = 61
pmu_bat_para13 = 73
pmu_bat_para14 = 84
pmu_bat_para15 = 92
pmu_bat_para16 = 100
pmu_usbvol_limit = 1
pmu_usbcur_limit = 0
pmu_usbvol = 4000
pmu_usbcur = 0
pmu_usbvol_pc = 4000
pmu_usbcur_pc = 0
pmu_pwroff_vol = 3300
pmu_pwron_vol = 2900
pmu_pekoff_time = 6000
pmu_pekoff_en = 1
pmu_peklong_time = 1500
pmu_pekon_time = 1000
pmu_pwrok_time = 64
pmu_pwrnoe_time = 2000
pmu_intotp_en = 1
pmu_used2 = 0
pmu_adpdet =
pmu_init_chgcur2 = 400
pmu_earlysuspend_chgcur2 = 600
pmu_suspend_chgcur2 = 1200
pmu_resume_chgcur2 = 400
pmu_shutdown_chgcur2 = 1200
pmu_suspendpwroff_vol = 3500
pmu_batdeten = 1

[boot_extend]
vol_threshold = 3600

[recovery_key]
key_min = 4
key_max = 100

[dvfs_table]
max_freq = 1008000000
min_freq = 60000000
LV_count = 7
LV1_freq = 1104000000
LV1_volt = 1500
LV2_freq = 1008000000
LV2_volt = 1400
LV3_freq = 912000000
LV3_volt = 1350
LV4_freq = 864000000
LV4_volt = 1300
LV5_freq = 624000000
LV5_volt = 1200
LV6_freq = 576000000
LV6_volt = 1200
LV7_freq = 432000000
LV7_volt = 1200
Please help my ç_ç
6th January 2014, 01:52 AM |#9  
Wilsonb's Avatar
Senior Member
Flag Austin
Thanks Meter: 231
 
More
Quote:
Originally Posted by simone.pri

First link of Multiple TS MODULE don't work


[/CODE]

I will try this Rom on my TW-Q8 Allwiner once there are more success stories..

Thanks for your work.
6th January 2014, 01:40 PM |#10  
tjkingg's Avatar
Senior Member
Flag Mumbai
Thanks Meter: 67
 
More
Quote:
Originally Posted by Wilsonb

I will try this Rom on my TW-Q8 Allwiner once there are more success stories..

Thanks for your work.

it works wonderfully well...however, battrey drains a lott!
6th January 2014, 04:11 PM |#11  
Wilsonb's Avatar
Senior Member
Flag Austin
Thanks Meter: 231
 
More
My specs
Quote:
Originally Posted by tjkingg

it works wonderfully well...however, battrey drains a lott!

I thought people were saying it would brick their device or no touch screen. If not I will do it today. I can work around the battery issue. It came
with a Firmware dated 11-30-2013 witch is not to old.
Should I capture this current firmware image on here for others? (How?)

My Specs on this white framed cheap thing I got recently..
Boxchip Allwinner A13
1008Mhz Single core
Mali 400MP (Single core GPU)

Tablet type:
TW-Q8 (Allwinner)

Screen size 7"
Freq. states 6
Neon capable (video playback)
512mb DDR
-----------------------------
Current firmware

Android 4.1.2
Baseband 1.5
Kernel 3.0.8+

Firmware build
JSD_TW-A0708-V63-120D_20131105
Post Reply Subscribe to Thread

Tags
allwinner a13, allwinner a13 rom, faast jb

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes