Improve Your Phone's Performance and Experience a New Change
Welcome to the Most Wanted THREAD that Ace Plus Users were demanding till now.
No one will be responsible for any damages caused to your device except you. Make sure you do this at own risk.
- Android version required - Gingerbread or JellyBean
- Make Sure your phone is charged at least 80%.
- You are doing this all at you own risk.
- Follow all the On Screen Instructions Very Carefully. Because it might happen that I may miss something while typing in this guide.
- Dont forget to create a CWM Backup first.
- Rooted Device
- SuperCharger Script.
- Busybox + Zipalign Binary
-First Stage (Running the Script):
- Download all the above given things and copy them to SD card also extract the "V6_SuperCharger_for_Android-Update9_RC12_Test_6.sh" file inside V6_SuperCharger.zip to SD Card.
- Flash Busybox + Zipalign Binary through CWM if busy box is not there inside /system/xbin not there in your ROM. If it is there then flash only Zipalign_Binary.zip
(Do this step Carefully)
- Install SManager or Download from Play Store.
- Open SManager and Select the V6_SuperCharger_xxxxxxx.sh
- Now a Pop-up will appear Select “SU” (See Image). Select “Is script”
- Now press “Run” and Grant Superuser Access.
- Now the Script is started. Follow Stage 2 below.
-Second Stage (Executing the Script Commands):
- When you will see like this (See Image) Press the Enter Key…
(Note: Whenever it asks to Press enter key, press it. It will ask this after every step.)
- Now Select Scrolling Speed. Enter any number you want 1 or 2 or 3.
(Mine is No. 2)(See Image)
- Now it will ask “Pick a Kernel Strength”. Type “N” or “n” and Hit “Enter”
- Now Type “Y” when asked for “Enable Misc. & SD Card Tweaks?”
- It will now ask to “Enable 3G Turbo Enhancement” Type “Y” and Press Enter.
- Now for “Run Fix Alignment on Boot”, Press “Y” and hit enter.
- Now “Run Detailing on boot?” Press “Y” and Hit Enter
- Now it will ask “How often?” Press 1 and Hit Enter.
- For “Disable Awesome V6 Animation”. Say “No”
- Now the Script will ask to “Apply SuperMinFree Calculator Settings?” Press “Y” and Hit Enter.
- Now it will ask “Enter (U)ltimatic, (I)nstall, E(x)it” Press “x” and Hit Enter.
- Now it will ask to return to Driver’s Console. Press Enter Key.
- We have now almost done with the script.
- Now you are prompted to enter an option from “Driver’s Console”
- Type Option No. “21” and Hit enter.
- Now Press any Key to say “Yes”
(Don’t press “N”)
- Now Enter Option No. “22” and hit enter.
- Now press “N” to Nullify and Press enter.
- Now Enter Option No. “17” and press enter.
- Now you will be prompted “Continue and Flush it all away?” Press enter.
- Now it will ask “Change Options?” Type “Y” and press enter.
- Now Enter “E” and Press enter.
- Now “How often do you want it to flush?” Type the value and hit enter
(Enter any value from 1 – 24) (Mine is 3)
- Now Enter Option No. “6” and hit enter.
(This is for balanced 512HP Settings MinFree Values)
- Now enter option No. “32” and press enter.
- Now it will ask “Do you want to SuperClean & Restart now?” Type “Y” and press enter.
- Now your Device will reboot. It will take some time to reboot so be keep patience
- Thats it. Enjoy.
Credits : zeppelinrox