FORUMS
Remove All Ads from XDA

[ROM] LegacyHuawei CyanogenMod 11.0

1,027 posts
Thanks Meter: 2,940
 
Post Reply Email Thread
Installation
https://github.com/LegacyHuawei/loca...i/Installation

Bugs
https://github.com/LegacyHuawei/loca...ts/wiki/Status

Downloads
https://basketbuild.com/devs/LegacyHuawei

Changelog
https://github.com/LegacyHuawei/loca...11.0-changelog

If you have any bugs to report, open new issue at https://github.com/LegacyHuawei/local_manifests/issues
The Following 114 Users Say Thank You to Blefish For This Useful Post: [ View ] Gift Blefish Ad-Free
19th January 2014, 05:18 PM |#2  
Blefish's Avatar
OP Senior Member
Flag Paluküla, Hiiumaa
Thanks Meter: 2,940
 
Donate to Me
More
Readme
Use the standard Torch app wherever possible, it only enables flashlight. Other apps from Play Store are designed to use the camera interface, which means camera will use additional power.

For more RAM: Settings->Performance->Memory management.
Do not enable KSM, as video encoder/decoder stops working.

HuaweiSettings
Charge current - allows you to set custom charging current. While this actually limits the current input, it effectively decreases or increases the available current transferred to the battery. This is useful in multiple ways:
  • Slower, but more effective charging. Your battery will last longer.
  • Faster charging when connected to USB. For example, USB charging is limited to 500mA, but newer PCs allow drawing up to 800mA or even more. This can be configured via the setting.
  • Manual override of non-standard charger allowing to draw more than 500mA.
Magnetic sensor calibration - lets you delete previous calibration information. This is useful to recalibrate the compass (when it's inaccurate). Just tap the item & then open any compass up to recalibrate your sensor.

If the phone reboots unexpectedly, crash log is found at /data/dontpanic .

To report bugs, use this app: https://play.google.com/store/apps/d....tortel.syslog
The Following 31 Users Say Thank You to Blefish For This Useful Post: [ View ] Gift Blefish Ad-Free
19th January 2014, 05:29 PM |#3  
season 8's Avatar
Senior Member
Flag Longan
Thanks Meter: 155
 
More
Thank you, i'll try
The Following 2 Users Say Thank You to season 8 For This Useful Post: [ View ] Gift season 8 Ad-Free
19th January 2014, 05:30 PM |#4  
Junior Member
Flag novokuzneck
Thanks Meter: 1
 
Donate to Me
More
wow, downloaded...
19th January 2014, 05:42 PM |#5  
Ax1qwer's Avatar
Senior Member
Thanks Meter: 377
 
Donate to Me
More
Many thanks, good job!
19th January 2014, 05:43 PM |#6  
Senior Member
Flag Lisboa
Thanks Meter: 66
 
More
after installing cm11 and gapps, the phone always reboot to recovery
19th January 2014, 05:58 PM |#7  
Blefish's Avatar
OP Senior Member
Flag Paluküla, Hiiumaa
Thanks Meter: 2,940
 
Donate to Me
More
Quote:
Originally Posted by ggunzio

after installing cm11 and gapps, the phone always reboot to recovery

Did you do a factory reset before?
And does it show the cm logo or just boot to recovery?

Sent from my IDEOS X5 using Tapatalk
The Following 7 Users Say Thank You to Blefish For This Useful Post: [ View ] Gift Blefish Ad-Free
19th January 2014, 06:03 PM |#8  
Senior Member
Flag Lisboa
Thanks Meter: 66
 
More
Tablet
Quote:
Originally Posted by Blefish

Did you do a factory reset before?
And does it show the cm logo or just boot to recovery?

Sent from my IDEOS X5 using Tapatalk

before installing the rom, i've wiped everything, data, cache, system and dalvkit cache, reboot recovery. After installed the rom, and right after, installed the gapps. Then, in recovery, reboot system and after it show the huawei logo, it enters recovery without showing the CM logo.

EDIT: i will install ble_part stock, and them install again the B518, repartition again and try to install CM again.
19th January 2014, 06:16 PM |#9  
Senior Member
Thanks Meter: 77
 
More
Booted and installed just fine after doing Blepart and using your recovery. It's slow as molasses, probably in great part due to the fact that the display glitches are still there, but it certainly works, and it's as much KitKat as my Moto G. Something worth mentioning, your recovery has some sort (the same?) of display glitch as well in which the screen only seems to update after a couple of presses of the volume button, not immediately.
19th January 2014, 06:24 PM |#10  
Ax1qwer's Avatar
Senior Member
Thanks Meter: 377
 
Donate to Me
More
ROM and GAPPS, everything works fine.
No glitches for me.

Great job, thanks!
19th January 2014, 06:26 PM |#11  
Blefish's Avatar
OP Senior Member
Flag Paluküla, Hiiumaa
Thanks Meter: 2,940
 
Donate to Me
More
Quote:
Originally Posted by faekplastik3s

Booted and installed just fine after doing Blepart and using your recovery. It's slow as molasses, probably in great part due to the fact that the display glitches are still there, but it certainly works, and it's as much KitKat as my Moto G. Something worth mentioning, your recovery has some sort (the same?) of display glitch as well in which the screen only seems to update after a couple of presses of the volume button, not immediately.

Thanks.

I don't have any devices to compare it with so it feels "fast" to me. Its great to know the recovery suffers same display bugs, it confirms that its in fact kernel side problem. Though, kernel side does not have BLT enabled, which I thought would be the problem. I'll debug the registers, and see if I can find something odd. It could also be a clock hz issue, it was changed in 3.4.

Sent from my IDEOS X5 using Tapatalk
The Following 5 Users Say Thank You to Blefish For This Useful Post: [ View ] Gift Blefish Ad-Free
Post Reply Subscribe to Thread

Tags
cyanogenmod kitkat 4.4.2 unofficial u8800

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes