Remove All Ads from XDA

Cherry Mobile Flare S roms

2 posts
Thanks Meter: 0
By GabMendezzzzzzz, Junior Member on 21st June 2014, 04:02 AM
Post Reply Email Thread
Can anyone please help me on how to backup everything on my phone and to flash a custom rom on my Flare S? Thank you

Sent from my Q360 using XDA Free mobile app
2nd December 2014, 09:25 AM |#2  
Junior Member
Flag Tuy
Thanks Meter: 1
I guess that your rooted so these are things that will you do if you want to flash a custom rom on your Cherry Mobile Flare S:
1.Download the Custom Recovery Installer at the Cherry Q360 page of Xda.
2.Choose either ClockworkMod or TWRP
now you can flash a rom
If you want a backup it either you download Titanum Backup OR use this Guide.
1.Go download root explorer or browser.
2.Go to directory /data
3.copy the folders named data(that is app data) and App(where your apk goes) to your external Sdcard
Flashing A Custom rom:
1.Go to
2.Download a Custom rom(I used their minimal Rom that has Cyanogenmod apps and google nexus boot animation)
3.Place the ZIP that you downloaded in your internal storage(but my TWRP reads the External 32Gb i have)
4,Boot into recovery by pressing volume+up and Power simultaneously
5.If using Twrp click install and select the rom zip install in the next dialog box that appears.
8.If it says sucessful then your done.
9.Re install root explorer.
10.Place the folders that i said to you to backup where you previously copied it.
Make sure your Battery Has at least 50 percent of power before f
6th August 2016, 11:57 AM |#3  
Junior Member
Thanks Meter: 0
Please i beg you to help me guys :'(
Hi XDA Admins and DEVs
i have a big a problem in flashing (SP Flashtool) my Cherry Mobile Flare S (deadboot)
everytime i'm going to click download, then connect device while holding volume down, it detects but after the red progress bar goes 100%, there's an error box suddenly pop-up

"Storage type mismatch!
scatter storage type is hw_storage_emmc
target storage type is hw_storage_none"

how to fix this guys ???

CM Flare S has V5, V7, and V9 Jellybean rom versions and i already flashed all of those but still, i always got that kind of error

i also properly installed the Vcom driver and already detected in SPFT but why i always got that kind of error ?? can someone help me ?? PLEASE :'(
11th August 2016, 12:02 PM |#4  
Pirex69's Avatar
Senior Member
Flag Lisboa
Thanks Meter: 168
I´ve got the same issue. Also trying to find a solution.
11th August 2016, 01:49 PM |#5  
Junior Member
Thanks Meter: 0
had the same issue on other devise (based on MT6577) with SP Flashtool v.5.x
SP Flashtool 3.x worked well
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes