** DoPa6 (AOSP - Marshmallow) ** is now available - see this post for details and downloads
** DoPa5 (AOSP - Kitkat) ** is now available - see this post for details and downloads
The ROM starts with well-tested AOSP code and adds core functions where needed but skips the frills that are easy to add on - and remove when they cause problems. It's aimed at people who want to choose their own features and not have them imposed by the developer.
New / Improved
- International Support - a single ROM for all Sero 7 Pros sold worldwide
New in v2.7 - support for the German model of the Sero 7 Pro (m470bsg)
- Speed Control - a unified kernel provides speed when you need it and stock performance when you don't.
Use the new Performance page in the Settings app to control it
- exFAT - support has been moved into the kernel for improved performance
- Boot Animation - a handsome new DoPa animation thanks to @mikembley, our first-ever UK user
- built-in: SuperSU, Xposed Installer GravityBox, Phab7
- optional: have your tablet claim it's a Nexus7 to get more apps in PlayStore
UK / AU / DE / First-time Users
If you're upgrading from a stock ROM (any variety), please click the "show content" button and read the instructions very carefully - they're long but your tablet's continued good health may depend on it!
STEP 1: Install Philz Touch Recovery
Users outside the US must use this version of Philz to install the ROM - neither the stock recovery nor other versions of CWM or Philz will work. Users in the US should use it just to avoid problems.
If you still have the stock recovery program you'll have to use the 'fastboot' program to install Philz. On Windows, this requires installation of the 'ADB' USB drivers while in fastboot mode (see below). A package containing the drivers, fastboot, adb and other files can be found in the 2nd posting on the DoPa Stock ROM thread. Note: there are several batch files (*.bat) in the package - do NOT run them.
- put fastboot.exe in a convenient directory, then unzip sero7pro-philz6.58.0-dopa-v2.7.zip and put the file philz.img in the same directory (you won't need the other files)
- unplug any USB cable, then press and hold Power+VolumeUp; the word "fastboot" should appear on the screen (nothing further will appear)
- plug the USB cable from your PC into the tablet, then install the driver (open Device Manager, right click on "Other Devices->Fastboot", then select "Update Driver Software")
- after installing the driver, open a command prompt ("DOS window") and change to the directory containing the files
- enter fastboot flash recovery philz.img
- when done, force the tablet off, remove the USB cable, then reboot into recovery: Power+VolumeDown - you should see the word "recovery", then the Philz menu
If you have CWM installed, copy sero7pro-philz6.58.0-dopa-v2.7.zip to an SD card, insert it in the tablet, then:
- remove any USB cable, then boot into recovery: Power+VolumeDown
- select "Install Zip", then "Choose zip from /storage/sdcard1"
- select the file, then OK the selection
- when done, back out to the main menu, select "Advanced options", then "Reboot recovery"
- after the initial "recovery" screen, you should see the Philz menu
STEP 2: Backup
I can't emphasize this enough: you must make a backup of your existing ROM. If something goes wrong, there's no way to get your device working again other than to restore it using the backup you've made. There's also another reason to do a backup: before installing the new ROM, you will have to reformat your /data partition. This will wipe out your apps, your settings, and most importantly, all the music/photos/etc stored on your "internal SDcard". These last items can be restored if you follow the instructions below:
You must do your backup onto a real SD card that you can remove because your "internal SDcard" will be erased in the next step. In fact, it wouldn't be a bad idea to do two backups (preferably to different cards) just in case one is faulty.
- on Philz main menu, select "Backup and Restore"
- next, select "Backup to /storage/sdcard1" (the 6th item on that menu)
- if there's enough space on the card, the backup will start without any further prompt; it could take anywhere from 3 to 15+ minutes depending on the amount of data and the speed of your card
- if needed, you can enable compression to create a smaller backup: select "Misc Nandroid Settings -> Default Backup Format -> tar + gzip", then on the previous menu, tap on "Compression" to set the appropriate level
This is optional but worthwhile if you have files you value stored on the tablet:
- on Philz main menu, select "Backup and Restore"
- next, select "Custom Backup to /storage/sdcard1" (the 9th item on that menu)
- on the next screen, deselect everything, then select "Backup /data/media" (the next-to-last item)
- finally, select "Start Custom Backup Job"
Before you begin, you may want to download a Google Apps ("Gapps") package that you can install after the ROM. See this thread for a selection of packages. To avoid complications, I'd suggest choosing the "Nano Modular Package" to get just the basics - you can always upgrade later. Put your Gapps package along with the ROM zip on an SD card and insert it into the tablet - you can use the same card you're using for your backups.
- on Philz main menu, select "Wipe and Format Options", then "Custom Format Options"
- select "format /data and /data/media (/sdcard)" (the 8th item), then OK your choice
- back on the main menu, select "Install Zip -> Choose zip from /storage/sdcard1"
- select sero7pro-aosp444-dopa-v2.7.zip, then OK your choice - the install process should take about 40 seconds
- next, install your Gapps package
- return to the main menu, select "Reboot System Now", then hold your breath for the next 3-4 minutes
- the Hisense screen should be up for less than a minute, followed by the DoPa boot animation for another 2-3 minutes
- when the Google setup screen appears, you'll probably get a warning that "Bluetooth Sharing" has stopped - after you clear it, you'll never see it again
While any SELinux-enabled version of CWM or TWRP can be used to install the ROM, the companion Philz Touch CWM-based recovery is highly recommended if you use exFAT-formatted SD cards.
- from DoPa AOSP Kitkat ROMs (v1.0-v2.6) - no need to wipe or format anything!
- from pre-Kitkat (v4.4.x) or any CM-based ROMs - wipe your /data partition before installing to avoid unnecessary problems.
- install sero7pro-aosp444-dopa-v2.7.zip
- the installer will wipe (but NOT format) /cache and dalvik-cache for you
- install your preferred Gapps package
- upgraders: this is required to prevent your downloaded Google apps from crashing
- optionally, install the Nexus7 spoof (sero7pro-nexus7spoof-dopa-v2.7.zip)
- reboot (ignore any "fix root" prompt - it's incorrect)
f2fs / ext4 Migration
This DoPa ROM gives you the flexibility to format any of your built-in partitions using either the f2fs or ext4 file systems.
As part of your install - or at any time - you can switch formats without losing any data. Click "show content" for instructions.
- make a nandroid backup to your external SD card
- select Wipe and Format Options, then Custom Format Options
- select toggle f2fs <-> ext4 migration
- be sure there's a confirmation message at the bottom of the screen
- select each partition you want to convert or wipe, then select the format and OK your choice
- Important: to convert your /data partition, you must select format /data and /data/media (/sdcard)!!!
- use Custom Restore from /storage/sdcard1 to restore the contents of the partitions you reformatted
- Speed Control - this version uses a redesigned kernel that caps processor speeds at stock levels during start-up, then adjusts them once the tablet is up and running. Go to Settings->Performance to enable this feature, and to set the top speeds for the CPU (1.0-1.5ghz) and GPU (448-520mhz). When disabled,the processor will remain at stock speeds (1.2ghz/448mhz) unless changed by a 3rd-party app.
- Encryption - the first time you formatted your /data partition, you lost the ability to encrypt your tablet's data. Using the companion Philz Touch Recovery to reformat /data (using either filesystem) will restore that ability. To preserve your existing data, do a backup first, then restore just /data when done. Note: you must select "format /data and /data/media (/sdcard)" when reformatting.
- OTG Charging Support - this kernel supports charging the tablet while an external device (flash drive, keyboard, etc.) is attached to the USB port. This feature requires either an OTG 'Y' cable or an OTG USB hub, and the AC adapter that came with the tablet. For this to work, power must be connected to the cable or hub before plugging it into your tablet. The OTG device(s) can be attached/detached at any time.
- WiFi Display (a.k.a. Miracast) - video works but its performance may depend upon your TV; audio does not work.
- Bluetooth Sharing - on the initial boot, this service will FC due to a timing issue. The system will restart it and you should never see this error again.
- International Support - added support to the kernel for the British and Australian models of the Sero 7 Pro
- Overclocking - replaced separate standard and overclocked kernels with a unified kernel that uses less power when overclocked; added a new Performance page to the Settings app to control it
- exFAT Support - moved exFAT support to the kernel for improved performance
- Boot Animation - added a custom boot animation created by @mikembley
- Flexible Formatting - added F2FS support for the /thirdparty and /mnt/modem partitions
- Bug Fix - enabled Philz Touch Recovery to format the /thirdparty and /mnt/modem partitions using EXT4
- Flexible Formatting - enabled use of either F2FS or EXT4 for any of the built-in partitions
- External Storage - added support for F2FS, and for devices formatted without a partition table (i.e. Windows-style "super-floppies")
- Android version - upgraded from AOSP 4.4.4_r2 to AOSP 4.4.4_r2.0.1
- Recovery - added a DoPa version of Philz Touch Recovery
- SD Cards - added support for SD cards formatted with the NTFS or exFAT filesystems
- Android version - upgraded from AOSP 4.4.4_r1 to AOSP 4.4.4_r2
- Google Now - voice activation (i.e "OK Google") now works in the Google Now launcher
- kernel - added OTG charging support.
- the CM team
- sero7pro-aosp444-dopa-v2.7.zip the full ROM
- sero7pro-nexus7spoof-dopa-v2.7.zip identify tablet as a Nexus7 to (possibly) show more apps in PlayStore
- sero7pro-philz6.58.0-dopa-v2.7.zip a customized version of Philz Touch CWM-based Recovery v6.58.0
- sero7pro-format-thirdparty.zip - only needed if you are downgrading from DoPa6 (Marshmallow) to previous versions (i.e. this one)