Remove All Ads from XDA

After Brick, After triangle, odin errors

36 posts
Thanks Meter: 1
By cnile, Member on 8th June 2014, 01:09 AM
Post Reply Email Thread
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747UCDLK3_I747ATTDLK3_I747UCDLK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

i hard brick, use sd card to boot, root, triangle away, boot to download, use odin for stock 4.1.1 gets to NAND write start and as u can see it fails, any fix for this?

EDIT: after the odin fail it goes back to showing SW REV CHECK FAIL : Fused 2 > Binary 0 on the download screen, thanks
8th June 2014, 02:11 AM |#2  
audit13's Avatar
Senior Member
Flag Toronto
Thanks Meter: 4,671
You are getting errors because you are trying to load a ROM with an older bootloader. Your phone has a 4.3 bootloader which cannot be downgraded. Do not use Odin to flash any ATT ROM from

Just load a custom recovery such as Philz Touch via Odin, wipe, and flash a custom Kit Kat ROM.
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes