FORUMS
Remove All Ads from XDA

[ROM] [KITKAT] [STABLE] CyanogenMod 11 for Galaxy Ace 3 LTE (GT-S7275) (EOL)

1,388 posts
Thanks Meter: 3,878
 
Thread Closed Email Thread
Dear Galaxy Ace 3 LTE users, yesterday succesfully compiled CM11 for our beloved device! Credits go to @szezso for his device tree and @TheWhisp for his cwm 6.0.4.9 recovery that is able to install kit-kat roms

Quote:

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.

Code:
#include 
/*
 * Your warranty is now void.
 *
 * I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at me for messing up your device, I will laugh at you.
 */
Quote:

All you questions here: Q&A! This is a development Thread

Quote:

BUGS
-NFC
-If using OTG reboot after finishing using it, because a wakelock occurs
-You might have random reboots sometimes

Quote:

WORKING
-Everything Else!

Code:
Link to the cwm recovery needed: http://d-h.st/pak
Code:
Latest Release is 20160820!
Download
Screenshots

Click image for larger version

Name:	Screenshot_2014-08-04-20-47-37.png
Views:	62823
Size:	92.7 KB
ID:	2883875
Click image for larger version

Name:	Screenshot_2014-08-04-20-47-44.png
Views:	60178
Size:	70.0 KB
ID:	2883876
Click image for larger version

Name:	Screenshot_2014-08-04-20-47-58.png
Views:	59466
Size:	68.0 KB
ID:	2883877
Click image for larger version

Name:	Screenshot_2014-08-04-20-48-01.png
Views:	56921
Size:	53.6 KB
ID:	2883878
Click image for larger version

Name:	Screenshot_2014-08-04-20-48-18.png
Views:	22370
Size:	234.4 KB
ID:	2883879
Click image for larger version

Name:	Screenshot_2014-08-04-20-49-05.png
Views:	55481
Size:	229.5 KB
ID:	2883880
Click image for larger version

Name:	Screenshot_2014-08-04-20-48-08.png
Views:	57036
Size:	132.0 KB
ID:	2883888
Click image for larger version

Name:	Screenshot_2014-08-04-20-48-32.png
Views:	22115
Size:	123.7 KB
ID:	2883889


Quote:

INSTALLATION
Enter download mode (Volume Down + Home + Power Button)
Install cwm recovery given above via odin v3.0.9 (put it in AP place WITHOUT auto reset option enabled)
when finished press and hold Vol Up + Home + Power Button to enter recovery mode without turning off the device
Wipe data factory reset
Install zip from sdcard/extsdcard --> choose zip from sdcard/extsdcard --> cm-11-XXXXXXXX-UNOFFICIAL-loganreltexx.zip
Reboot system now

Code:
 
            ENABLE ART(need fresh install)
1. Reboot into recovery mode
2. Wipe data, cache and dalvik cache
3. Format /system partition
4. Flash cm11
5. Reboot
6. Enable ART 
7. Reboot into Recovery
8. Flash Gapps
9. Reboot
Code:
If you experience problems with wi-fi:
All you have to do is to set country code to your country in Wi-Fi settings
Quote:

If you experience problems with any external applications try switching from ART to DALVIK before asking or sending a private message

Quote:

If you have random reboots, this is the solution that is reported to solve the problem, thanks @mohamed786

Quote:

All the builds will be hosted here: Download
***Mirroring my ROM and builds is not appreciated***

Quote:

Video Preview
Thanks @AeroMiku
Another video preview

Quote:

Thanks list
@arco68
@TheWhisp
@mir3k
@Rox
@faux123
@CM team of course,
without all this help and contribution, I wouldn't have done almost anything
*If I forgot someone, excuse me, send me a pm, and I will add you
Donate to those guys if you can. They helped me a lot, especially arco

Quote:

Official facebook page: Page

Code:
Releases:
-20160820-
*CM sources update
*August security patch level
*Kernel: HID: hiddev: validate num_values for HIDIOCGUSAGES, HIDIOCSUSAGES commands (CVE-2016-5829)
*Kernel: net: ipc_router: Bind only a client port as control port (CVE-2016-2059)
*Kernel: msm: kgsl: Defer adding the mem entry to a process (CVE-2016-2504)
*Kernel: ashmem: Validate ashmem memory with fops pointer (CVE-2016-5340)
*Kernel: msm: board-8930-pmic: Remove PMIC LED driver
*Kernel: msm: Fix bus vector for DFAB clk setting
-20160107-
*CM sources update
*Latest android security patch level(2016-01-01)
-20151113-
*CM sources update
*More security patches brought by Cyanogen
-20151110-
*CM sources update
*Security patches from Cyanogen
*rootdir: init.target.rc: update sensors from stock ramdisk
*rootdir: Remove read ahead tunings
-20150824-
*Include custom Kernel
*Kernel: Re-implemented kexec hardboot
*Kernel: Fixed last_kmsg
-20150814-
*CM sources update
*Patches for stagefright vulnerability
*Kernel: Support for kexec hardboot
*Kernel: Add Fiops i/o scheduler
*Kernel: Add smartmax_eps cpu governor
-20150701-
*CM sources update
*Fix compass
*Cleanup init.qcom.power.rc for unnecessary stuff
*Update interactive governor values
*Kernel: Misc patches
-20150501-
*CM sources update
-20150424-
*CM sources update
*Remove hdpi from PRODUCT_AAPT_CONFIG
*Disable cpu.notify_on_migrate feature
*Enable mpdecision by default
*Kernel: Misc patches
-20150324-
*CM sources update
*Web security patches applied
*Kernel:Misc patches
-20150320-
*CM sources update
*Remove setting permissions for non-existent fmradio dev
*Enable separated headset mic
*Update snd_soc_msm_2x 
*Drop NFC support
*Kernel: Avoid some memleaks
*Kernel: Misc patches
-20150312-
*CM sources update
*Revert: "Move custom AAPT config to cm.mk"
-20150308-
*CM sources update
*msm8930-common: camera: Modify base.common.version API define
*Re-enable QCOM's HW AAC encoder
*Kernel: Fix QCOM's HW AAC encoder
*Revert "rootdir: Create native cgroup"
-20150305-
*CM sources update, mostly translations
*Fixed camcorder
-20150228-
*Enable QCOM's HW AAC encoder"
*Disable LPA
*Set default country index to Europe in FM app
*Create native cgroup
*Move custom AAPT config to cm.mk
*Kernel: Tune voltage table
*Kernel: Misc patches
-20150219-
*CM sources update
*Kernel: Re-add intelliactive cpu governor
*Kernel: Re-add sio i/o scheduler
*Kernel: Probably fixed random reboots
*Kernel: eCryptfs: Remove buggy and unnecessary write in file name decode routine
*Kernel: Νetfilter: conntrack: disable generic tracking for known protocols
-20150120-
*CM sources update
*Revert: Remove chmod of /proc/cmdline
*Kernel: Optional overclock up to 1.7GHz
*Kernel: Update intelli_plug to v3.9
*Kernel: Add intellimm cpu governor
*Kernel: Misc patches
*Fix encryption after factory reset
-20150102-
*CM sources update
*Disable QCOM's HW AAC encoder
*Disable audio offload
*Update media_profiles
*Fix: Now audio from videos plays on both sides of headphones/speaker
-20141225-
*CM sources update
*Don't show mobile plan preference
*Load fastrpc module after boot 
*Minor cleanup in init.carrier.rc
*Move wcd9310 symlink creation to msm8930-common
*msm8930-common:Create wcd9310 symlinks during build process
*Enable smooth-streaming video-playback
*Don't mount persdata
*Revert: Enable large heap for Trebuchet
*Minor kernel patches
-20141205-
*CM sources update
*Remove qrngd service 
*Add SettingsProvider
*Update ueventd.qcom.rc 
*Minor cleanup of init.qcom.rc 
*Enable large heap for Trebuchet
*Fix hostapd service to use correct config folder
*Remove chmod of /proc/cmdline
*Change NTP_SERVER in gps.conf to use izatcloud 
*Set default locale to en_UK
*Remove obsolete option 
*msm8930-common:Cut EGL cache size in half
*msm8930-common:Define correct path to hostapd files
*msm8930-common:Some camera wrapper cleanup and changes 
*msm8930-common:Disable CCX support in Prima config 
*msm8930-common:Remove unused option from camera makefile
*Many kernel patches
-20141125-
*CM sources update
*Increase read ahead to 512KB
*Revert: Enable face detection
*Revert: Change ADCBID for PROXY Rx
*Revert: Loganre: Enable proximity wake option
*Disable interactive governors sync_freq feature
*Add back couple of missing lines in media_codecs.xml
*Disable wpa_supplicant log spam 
-20141115-
*CM Sources update
*Added Binaries for IPv6 tethering
*Fixup input paths
*Removed Fauxsound, it caused calling bug
*Fixed FM Radio
*Updated media codecs
-20141112-
*CM Sources update
*Use bottom mic for speaker phone 
*Change ACDBID for PROXY Rx 
*Enable face detection
*Audio config improvements
*Fixed audio playback
*Wlan: prima: Sync with kk_2.7
*Milestone M12 release
-20141107-
*CM sources update
*Ramdisk updates
*GPS config improvements
*GPS HAL improvements
*Move power management to a separate init.qcom.power.rc
*Revert:add VR headset to use case, it was breaking mic on phone calls in my tests
*Official toolchains used
-20141102-
*CM sources update
*Kernel: Reduced max OC for both CPU(1.5GHz) and GPU(475MHz) for safety
*fixed "com.qualcomm.timeservice has stopped"
-20141101-
*CM sources update
*fstab updates, now you can mount USB-OTG without a 3rd party app (EXT4 filesystem tested)
*re-enabled triple framebuffer
*audio/snd_soc_msm_2x: Add VR headset use case
*Disabled mpdecision service, we have intelliplug
-20141028-
*CM Sources Update
*Kernel:Add Fauxsound, thanks @Paul
*Kernel:Squashed update of wifi regulatory database
*Kernel:CPUfreq Updates 
*Overlay cleanup
*Add some blobs
*Enabled GPS XTRA servers
*Camera HAL code cleanup
-20141023-
*CM Sources Update
*Finally stock camera rotation bug is FIXED!!!, thanks Arne Coucheron, Abhisek Devkota
*Removed AGPS_USE_PSC from GPS HAL again
*Build.prop updates
*Kernel: Add GPU OC up to 627 MHz including stock frequencies this time
*Kernel: Add Intelli_plug hotplug driver as well as msm_hotplug, credits @Faux123
-20141020-
*CM Sources Update
*Changed Network buffer sizes from stock
*Kernel: Manage Offline CPUs
*Add USB_OTG back to storage menu
*Add USB-OTG support in kernel (Needs testing, for undesired wakelocks)
*Some kernel update
*Reverted Some GPS HAL changes
-20141017-
*CM Sources Update
*Correct cpu voltage table in kernel
*Added Underclock again up to 162 MHz
*Increased Overclock limit up to 1.7 GHz
*Removed USB-OTG from storage menu
*Device tree cleanup/update
-20141010-
*CM Sources Update
*Revert: KSM enabled by default
*M11 milestone release
*msm8930-common: camera: Don't forcefully enable ZSL
*Add Overclock: 1.24 GHz, 1.35 GHz, 1.45 GHz
*Added SmartassV2, Intelliactive CPU governors
*Added sio and sioplus I/O governor
-20141007-
*CM Sources Update
*Fixed Superuser settings force close
*Fixed Terminal Emulator force close
*Kernel Downgrade to 3.4.0, it should be more stable
*Kernel is built with Linaro 4.7 now
*Update Camera HAL API (arco)
-Features still present in kernel:
*Change readahead to 512kB.
*Voltage Control
*Optimize KSM
*USB Fastcharge
-Features removed from kernel(due to perfomance issues and stability):
*GPU Overclock
*GPU Optimizations
*Graphite Kernel Optimizations
*O3 Kernel Optimizations
*Cortex A15 Optimizations
-20141005-
*CM Sources Update
*Kernel Update up to 3.4.103, thanks @F4k
*Remove useless dual sim stuff from ramdisk
*GPU Overclock up to 627 Mhz (Be careful)
*GPU Optimizations
*CPU Voltage Control (Be careful)
*Enable KSM by default
*Many, many Kernel Updates
*Graphite Kernel Optimizations
*-O3 Kernel Optimizations
*Change Kernel readahead to 512KB
*Optimize Kernel SamePage Merging
*Cortex A15 Optimizations
*Kernel compiled with Linaro 4.9.2 now
*Usb Fastcharge support
*More, more and more
-20141003-
Changelog:
*CM Sources Update
*Fix in liblights
*Kernel was built with Sabermod 4.7.4 toolchain
*Updated Recovery (CWM 6.0.5.1)
-20140930-
Changelog:
*CM Sources Update
*Updated Build Fingerprint From Latest Stock Rom
*Updated fstab
*Add Missing Device Permissions
*Kernel Update
*Overlay Sar Levels(Settings->About Phone->Status->SAR Levels)
-20140919-
Changelog:
*CM sources update
*Kernel Updates
*Adreno libs update
-20140916-
*CM sources update
*Adjustments to power HAL
*CyanogenMod M10
-20140913-
Changelog:
*CM sources update
*Kernel Updates
*Wifi Driver Update
-20140910-
Changelog:
*CM sources update
*Update Ramdisk
*Add Support for GT-S7275T
*Allow more background services
*msm8930: Enable triple framebuffer
-20140904-
Changelog:
*CM sources update
*Fixed Missing Preferred Network type under Network Settings
*msm8930-common: Merge in some wifi config changes from stock KK
-20140903-
Changelog:
*CM sources update
*Some Kernel Update
-20140901-
Changelog:
*CM sources update
*Updated GPS config
*Fixed WMA audio files playback(Apollo couldn't play .wma files)
-20140831-
Changelog:
*CM sources update
*Massive KitKat Blobs Update from Express 2 and Serrano
*Added missing OMX decoder
*Stability should be increased
*Reworked GPS (arco)
*Add Support for GT-S7275B
-20140829-
Changelog:
*CM sources update
*Modified Stock Power Profiles to fit our device(corrected cpu states and more)
-20140827-
Changelog:
*CM sources update
-20140823-
Changelog:
*CM sources update
*Added Soft Reboot option in Reboot options
-20140818-
Changelog:
*CM sources Update
*Fixed mic on loudspeaker while calling again
*CM sources update
-20140816-
Changelog:
*CM sources update
-20140813-
Changelog:
*New Kernel Config, should improve some things, thanks @arco68
*Removed SmartassV2 governor, reported to use highest frequency all the time
*CM sources update
*Device tree update from @arco68
*Added Blobs from stock ANF2 firmware, thanks @arco68
*Added Google Camera in build, camcorder lag should disappear
*Use stock ANF2 ril blobs, should improve network
*Audio improvements by @arco68
-20140806-
Changelog:
*Probably fixed MMs again, need testing and feedback
*CM Sources Update
-20140801-
Changelog:
*CM sources update
*Removed USB OTG due to wakelock bug
-20140724-
Changelog:
*CM source Updates
*Fixed missing option from storage settings: Unmount SDcard
-20140721-
*CM sources update
*Kernel Changes, now camera seems a little more stable to me
-20140719-
Changelog:
*Voip Fix
*CM source Updates
*Kernel Sources Update
Add Dock Headset to audio policy
-20140716-
Changelog:
*Using custom power HAL (Should improve battery)
*CM sources update
*Audio config improvements and cleanup
Code:
GAPPS
Code:
If you like it, give me a thanks :)
The Following 95 Users Say Thank You to kotzir For This Useful Post: [ View ]
 
 
1st July 2014, 08:14 AM |#2  
kotzir's Avatar
OP Recognized Developer
Flag Thessaloniki
Thanks Meter: 3,878
 
Donate to Me
More
Wifi Working
Quote:
Originally Posted by kostoulhs

Dear Galaxy Ace 3 LTE users, yesterday succesfully compiled CM11 for our beloved device! Credits go to @szezso for his device tree and @TheWhisp for his cwm 6.0.4.9 recovery that is able to install kit-kat roms


ROM IS BETA, fixes needed!

WORKING
Ril
Bluetooth
Data (I think there is an issue, but seems to work)
FM radio


BUGS
Camera
Wifi
NFC
Auto-rotate
You tell me

link to the cwm recovery needed: https://www.dropbox.com/s/wluzefvek2...oganre.tar.md5

Link to the rom if you wanna test: https://drive.google.com/file/d/0B7B...it?usp=sharing

INSTALLATION
Enter download mode (Volume Down + Home + Power Button)
Install cwm recovery given above via odin v3.0.9 (put it in AP place WITHOUT auto reset option enabled)
pull out battery when finished
Enter recovery mode (Vol Up + Home + Power Button)
Wipe data factory reset
Install zip from sdcard --> choose zip from sdcard --> cm-11-XXXXXXXX-UNOFFICIAL-loganreltexx.zip
Reboot system now


PS: I am not responsible for any damage to your device

Wifi working! Thanks mir3k from github https://mega.co.nz/#!80kh3S5A!-5UDhZ...pgvyye1smwx3MQ
The Following 14 Users Say Thank You to kotzir For This Useful Post: [ View ]
2nd July 2014, 11:08 AM |#3  
JavierAlonso's Avatar
Senior Member
Flag Santa Cruz de Tenerife
Thanks Meter: 206
 
Donate to Me
More
Quote:
Originally Posted by kostoulhs

Wifi working! Thanks mir3k from github https://mega.co.nz/#!80kh3S5A!-5UDhZ...pgvyye1smwx3MQ


Hey, I have some questions.

1. For wich models is it?
2. Gapps?
3. Exactly version of Kit-Kat?
4. Who is the developer of this ROM?
5. How to enable/disable ART?
2nd July 2014, 11:14 AM |#4  
kotzir's Avatar
OP Recognized Developer
Flag Thessaloniki
Thanks Meter: 3,878
 
Donate to Me
More
Answers
Quote:
Originally Posted by Arcanister99

Hey, I have some questions.

1. For wich models is it?
2. Gapps?
3. Exactly version of Kit-Kat?
4. Who is the developer of this ROM?
5. How to enable/disable ART?

1) For GT-S7275R
2) http://www.devfiles.co/download/7m2V...105-signed.zip
3) Android 4.4.4
4) Device tree originaly created by @szezso , then modified a little by me and another guy from github, compiled by me and the guy from git
5) About phone --> tap 5 times on "Build number", then "Developer options" should be enabled. After that --> "Developer options" all the way down you will see "Select Runtime" tap on it and select ART, the phone will reboot
The Following 7 Users Say Thank You to kotzir For This Useful Post: [ View ]
2nd July 2014, 11:15 AM |#5  
kotzir's Avatar
OP Recognized Developer
Flag Thessaloniki
Thanks Meter: 3,878
 
Donate to Me
More
You need CWM provided
Quote:
Originally Posted by kostoulhs

1) For GT-S7275R
2) http://www.devfiles.co/download/7m2V...105-signed.zip
3) Android 4.4.4
4) Device tree originaly created by @szezso , then modified by a little by me and another guy from github, compiled by me and the guy from git
5) About phone --> tap 5 times on "Build number", then "Developer options" should be enabled. After that --> "Developer options" all the way down you will see "Select Runtime" tap on it and select ART, the phone will reboot

PS: you need provided CWM because mahound's cwm can't install kitkat roms
The Following 7 Users Say Thank You to kotzir For This Useful Post: [ View ]
2nd July 2014, 10:51 PM |#6  
Rox's Avatar
Senior Member
Mostar
Thanks Meter: 11,563
 
Donate to Me
More
Can you link me to your sources ? I wanna help you in developmet
The Following 2 Users Say Thank You to Rox For This Useful Post: [ View ] Gift Rox Ad-Free
3rd July 2014, 12:17 AM |#8  
kotzir's Avatar
OP Recognized Developer
Flag Thessaloniki
Thanks Meter: 3,878
 
Donate to Me
More
That's cool :D
Quote:
Originally Posted by Rox

Can you link me to your sources ? I wanna help you in developmet

Those repo's given are the used ones, actually they are the same
The Following 3 Users Say Thank You to kotzir For This Useful Post: [ View ]
3rd July 2014, 09:42 PM |#9  
kotzir's Avatar
OP Recognized Developer
Flag Thessaloniki
Thanks Meter: 3,878
 
Donate to Me
More
Camera Issue
UPDATE

Camera issue almost resolved (there are some errors and also crashes in video mode)
Big thanks @mir3k
The Following 6 Users Say Thank You to kotzir For This Useful Post: [ View ]
4th July 2014, 07:45 AM |#10  
kotzir's Avatar
OP Recognized Developer
Flag Thessaloniki
Thanks Meter: 3,878
 
Donate to Me
More
GPS issue also resolved
Thanks @mir3k for the hard work and tests
The Following 3 Users Say Thank You to kotzir For This Useful Post: [ View ]
4th July 2014, 01:30 PM |#11  
Houndcatcher's Avatar
Senior Member
Flag Lancing
Thanks Meter: 17
 
Donate to Me
More
Quote:
Originally Posted by kostoulhs

GPS issue also resolved
Thanks @mir3k for the hard work and tests

Cool. Post 1 Rom link broken for me. One further down worked though.
The Following User Says Thank You to Houndcatcher For This Useful Post: [ View ] Gift Houndcatcher Ad-Free
Thread Closed Subscribe to Thread

Tags
ace-3
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes