[TOOL/UTILITY][TWRP][3.2][RECOVERY] TWRP 3.2.2-0 TeamWin Recovery Project

Search This thread

bigbiff

Senior Recognized Developer
Jun 8, 2010
6,964
7,245
[RECOVERY] TWRP 3.2.2-0 - TeamWin Recovery Project

TeamWin is proud to present TWRP 3.2.2-0 for the Samsung Galaxy Note 4 (Exynos/Qualcomm International)!



Youtube video: http://www.youtube.com/watch?v=RIvWVS_Rkxo

Full TeamWin credits are on the TWRP page on the TeamWin website: http://teamw.in/project/twrp2

Introduction:

Team Win Recovery Project or twrp2 for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added a lot of our own features. It's a fully touch driven user interface , no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.

Key Features:

Touchscreen driven with real buttons and drag-to-scroll
XML-based GUI that allows full customization of the layout true theming!
Settings are saved to the sdcard and persist through reboots
Ability to choose which partitions to back up and which to restore
Ability to choose to compress backups now with pigz (multi-core processor support for faster compression times)
Onscreen keyboard
Decryption of /data
Easy selection of internal/external storage
See changelog below for new features

In addition to the above new features, TWRP features a scripting engine that allows an app to send commands to the recovery for the recovery to perform during startup. We call this scripting engine OpenRecoveryScript. This engine will be put to use immediately in the GooManager app. GooManager will be able to install recoveries automatically for most supported devices. The app will also let you choose to install multiple zips from within Android, wipe cache & dalvik, and run a backup.

We are looking for other talented developers, themers, and device maintainers if they are interested in helping with a free, open source project.

Source Code:

GitHub - https://github.com/omnirom/android_bootable_recovery

Gerrit for TWRP Official Device Configs - http://gerrit.twrp.me

Gerrit Instance - http://gerrit.omnirom.org

If you have made your own twrp build for an unsupported device, please let us know. We might add your build to the list of unofficial builds. Bear in mind that we are working hard to add more devices and we may add your device to our official build list later.

treltexx Device Config: TBD

Kernel: https://github.com/bigbiff/android_...ub.com/bigbiff/android_kernel_samsung_trltexx

DOWNLOAD:

All official devices are listed at the top of the page on the Team Win website. Search for the device in the textbox.

http://twrp.me


Support:

Click http://webchat.freenode.net/?channels=twrp for live support or join us in #twrp on Freenode IRC servers
 
Last edited:

bigbiff

Senior Recognized Developer
Jun 8, 2010
6,964
7,245
Changelog

See http://twrp.me for official release notes.


3.0.2-0
- Fix a bug with the input box that affected masked inputs (passwords). This fixes decrypt of full device encryption on devices that support decrypt. This bug also impacts encrypted backups. Users are highly encouraged to stop using 3.0.1 if you use encrypted backups or if you need decrypt of data in TWRP.
- Add Greek translation to some builds.

3.0.1-0

-support new CM 13.0 pattern encryption (sultanqasim)
-fix slow flashing issue due to modprobe (present on only some devices) (#twrp)
-libtar updated to latest upstream and fixes (jcadduono)
-fixes for loading custom themes (_that)
-TWRP will now detect and install TWRP themes automatically through the normal zip install process (Dees_Troy)
-translation updates - added Italian, Czech and Polish and significant updates to Dutch
-progress bar improvements - progress bar updates during image flashing and better tracks progress during file system backups (tar) (Dees_Troy)
-fix input box text display (Dees_Troy)
-reboot option after zip install complete (bigbiff)
-other mostly invisible bug fixes and improvements

TWRP 3.0.0-0 is out now for all currently supported devices.

What’s new in 3.0.0-0:

Completely new theme - Much more modern and much nicer looking (by z31s1g)
True Terminal Emulator - Includes arrow keys, tab and tab completion, etc. (by _that)
Language translation - It won’t be perfect and especially some languages that require large font files like Chinese & Japanese won’t be availble on most devices. Also some languages may only be partially translated at this time. Feel free to submit more translations to OmniROM’s Gerrit. (mostly by Dees_Troy)
Flashing of sparse images - On select devices you will be able to flash some parts of factory images via the TWRP GUI (by HashBang173)
Adopted storage support for select devices - TWRP can now decrypt adopted storage partitions from Marshmallow
Reworked graphics to bring us more up to date with AOSP - includes support for adf and drm graphics (by Dees_Troy)
SuperSU prompt will no longer display if a Marshmallow ROM is installed
Update exfat, exfat fuse, dosfstools (by mdmower)
Update AOSP base to 6.0
A huge laundry list of other minor fixes and tweaks

WARNING: This is our first release in a long time. We have a lot of new and somewhat aggressive changes in this new release. The changes to the graphics back-end may cause some devices to not boot up properly or have other display-related issues. If you are not in a position to reflash an older build of TWRP, then wait until you are or at least wait until others have tried the new version for your specific device. You don’t want to end up with a non-working recovery and have to wait several hours or days to get to a computer to be able to fix it.

Notes for themers: In addition to the udpated theme, we have introduced a theme version variable to the TWRP theme system. If the theme version does not match the version that TWRP expects, TWRP will reject the custom theme and load its stock theme. This change will ensure that people who update TWRP without updating their theme will still have a workable recovery. We have removed libjpeg support. The stock theme was only using a jpeg image for the splash / curtain. This change means that any custom themes will no longer be able to use jpeg images. It also means that tools used to repack recovery images with a different curtain / splash will need to be updated to use the new method.

Version number notes: For a while we’ve been using a 4 digit version number and reserved the 4th digit for device-specific updates. For instance, we find and fix a device-specific issue like decryption of data on Nexus 5, we would release that as a 2.8.7.1. After a while, some people would start asking where 2.8.7.1 was for other devices. So, going forward we have decided to change the numbering scheme to 3.0.0-2, etc. Our hope is that this version numbering scheme will more clearly identify that the 4th digit does not indicate a version change for the code base.

We need your help! The bulk of TWRP work is done by 3 people on a volunteer basis. We have pushed most of our device files to our github and we have a gerrit instance. If you have the ability, please help us maintain our official devices and/or add your device to our official device list. Thanks in advance!

You can track the progress of builds here

Head over to the devices page to find install instructions and download links.
TWRP 3.0.0-0 is out now for all currently supported devices.

What’s new in 3.0.0-0:

Completely new theme - Much more modern and much nicer looking (by z31s1g)
True Terminal Emulator - Includes arrow keys, tab and tab completion, etc. (by _that)
Language translation - It won’t be perfect and especially some languages that require large font files like Chinese & Japanese won’t be availble on most devices. Also some languages may only be partially translated at this time. Feel free to submit more translations to OmniROM’s Gerrit. (mostly by Dees_Troy)
Flashing of sparse images - On select devices you will be able to flash some parts of factory images via the TWRP GUI (by HashBang173)
Adopted storage support for select devices - TWRP can now decrypt adopted storage partitions from Marshmallow
Reworked graphics to bring us more up to date with AOSP - includes support for adf and drm graphics (by Dees_Troy)
SuperSU prompt will no longer display if a Marshmallow ROM is installed
Update exfat, exfat fuse, dosfstools (by mdmower)
Update AOSP base to 6.0
A huge laundry list of other minor fixes and tweaks

WARNING: This is our first release in a long time. We have a lot of new and somewhat aggressive changes in this new release. The changes to the graphics back-end may cause some devices to not boot up properly or have other display-related issues. If you are not in a position to reflash an older build of TWRP, then wait until you are or at least wait until others have tried the new version for your specific device. You don’t want to end up with a non-working recovery and have to wait several hours or days to get to a computer to be able to fix it.

Notes for themers: In addition to the udpated theme, we have introduced a theme version variable to the TWRP theme system. If the theme version does not match the version that TWRP expects, TWRP will reject the custom theme and load its stock theme. This change will ensure that people who update TWRP without updating their theme will still have a workable recovery. We have removed libjpeg support. The stock theme was only using a jpeg image for the splash / curtain. This change means that any custom themes will no longer be able to use jpeg images. It also means that tools used to repack recovery images with a different curtain / splash will need to be updated to use the new method.

Version number notes: For a while we’ve been using a 4 digit version number and reserved the 4th digit for device-specific updates. For instance, we find and fix a device-specific issue like decryption of data on Nexus 5, we would release that as a 2.8.7.1. After a while, some people would start asking where 2.8.7.1 was for other devices. So, going forward we have decided to change the numbering scheme to 3.0.0-2, etc. Our hope is that this version numbering scheme will more clearly identify that the 4th digit does not indicate a version change for the code base.

We need your help! The bulk of TWRP work is done by 3 people on a volunteer basis. We have pushed most of our device files to our github and we have a gerrit instance. If you have the ability, please help us maintain our official devices and/or add your device to our official device list. Thanks in advance!

You can track the progress of builds here

Head over to the devices page to find install instructions and download links.
2.8.7.0

- Initial ground work for software drawn keyboard (_that)
- Fix handling of wiping internal storage on datamedia devices (xuefer)
- Allow DataManager to set and read values from the system properties (xuefer)
- Fix crash when taking screenshots on arm64 devices (xuefer)
- Fix error message after an ORS script completes (Dees_Troy)
- Fix crashes / error when creating encrypted backups (_that, Dees_Troy)
- Add system read only option - more details below (Dees_Troy)
- Add resize2fs and GUI option to run resize2fs (Dees_Troy)
- Fix crash loop caused by empty lines in AOSP recovery command file (_that)
- Prevent duplicate page overlays such as multiple lock screens (mdmower)

System read only option: Devices that ship with 5.0 and higher as their initial OS are using block level OTA updates. With this style of OTA update, the update script checks to see if the system partition has ever been mounted read/write. Further, the script also usually runs an SHA sum of the entire system partition to detect if any changes have been made. If any changes have been made, the OTA update will refuse to install. Since not all OEMs and devices have factory images available, we have created a new feature in TWRP that detects if the system partition has ever been mounted read/write. If not, you will be prompted asking if you want TWRP to mount system as read/write. If you choose not to allow TWRP to mount as read/write, TWRP won't prompt to install SuperSU and TWRP won't try to patch the stock ROM to prevent TWRP from being replaced by stock recovery. The goal of this option is to hopefully allow the user to make a raw system image backup that they can use to get back to a state where they can take OTA updates again.

resize2fs feature: On some devices like the Nexus 6, the factory images include a userdata image that is the proper size only for the 32GB units. If you flash the factory image to a 64GB Nexus 6, the data partition will appear as if it only has the free space of a 32GB device. Using the resize2fs option, TWRP can resize your data partition to take up the full space available. The resize2fs may also be useful to resize system partitions on devices where custom ROM system images don't take up the full partition space. Lastly, resize2fs may be useful in some cases to reserve the proper space at the end of a data partition for a full disk encryption key, should your partition be formatted incorrectly for some reason.

This new version also marks our first set of full builds using our new jenkins build server. You can track the progress of builds at https://jenkins.twrp.me and we have taken additional steps to make it easier for device maintainers to step up and submit patches to our gerrit server at https://gerrit.twrp.me to help us keep devices up to date and working.

2.8.6.1
treltexx
- fix color scheme again

2.8.6.0

- Allow mulitple overlays for popup boxes (Dees_Troy)
- Add pattern style password entry for decrypt (Tassadar)
- Keyboard improvements (_that)
- Update AOSP base to 5.1 (Dees_Troy)
- Reduce theme count to 5 and rely on scaling (Dees_Troy)
- Various scaling improvements (Dees_Troy)
- Improved handling of resources in the GUI (_that)
- Make scroll bar size proportional to list size (_that)
- Allow scoll lists to render without a header (_that)
- Make console scroll per pixel with kinetic scrolling (_that)
- Support styles in XML to reduce XML size and improve consistentcy (Dees_Troy)
- Various other fixes and improvements (mdmower, bigbiff, codelover, etc)

2.8.5.0
- Scale the GUI - TWRP can read the theme's resolution and scale it up or down to fit the theme to your screen's resolution
- Improve thread handling and move input handling into the main rendering thread to improve stability
- Make MTP work even if unplugged and plugged back in
- Unify scrollable list code and make kinetic scrolling feel more natural
- Fix handling of mapped zip files for OTA updates (CM12 updater)
- USB keyboards should now work on all devices that support USB host mode via a USB OTG cable
- Add Cancel Backup capability
- Other small fixes and improvements

2.8.4.0
- MTP fixes and improvements - you can now copy zips to the root of storage - thanks to _that
- Add flashing of boot and recovery images via the TWRP GUI (Find the Images button on the Install page)
- Fix some MTP related crashes and bugs
- Eliminate TWRP toggling USB IDs during boot if MTP is enabled
- Fix various adb sideload issues
- Improve threading of actions
- Eliminate separate thread for screen timeout
- Update libblkid to 2.25.0
- Use power button as back button on watch themes for easier navigation
- Add mutex locking to data manager
- Improve custom theme handling on encrypted devices
- Allow the stock theme to be offset by build flags so we can center a lower res theme on a higher res screen especially for watches with round screens

2.8.3.0

- MTP fixes and improvements - you can now copy zips to the root of storage - thanks to _that
- MTP will now tell the host PC that storage is removed instead of disabling MTP completely
- MTP will now report the correct max file size based on the file system in use to the host PC (may fix transfer of large files)
- Update and improve fix permissions and make fixing contexts optional
- Update SuperSU in TWRP to 2.40 and update install process
- Make TWRP work properly on AArch64 (Nexus 9 is now built in true 64-bit binaries and libraries)
- Attempt to set correct permissions and contexts on all files placed in storage so backups will show in Android
- Fix kernel panic during MTP start on some devices
- Support unicode fonts on devices with True Type Font support
- Fix slider value not showing sometimes (vibration settings page)
- Toggle MTP off during adb sideload to set correct USB IDs
- Reduce library requirements for 5.0 L decrypt
- Other minor fixes and improvements


2.8.1.2
- 2nd release with everything working except ADB

 
Last edited:

geewizz

Member
Oct 19, 2010
10
2
Christchurch
TWRP throwing errors on 2.8.1.2

+1 if you use the 2.8.1.2
i flash the 2.8.1.1 and it work, i have too an N910C :(

Hi there.
I'm on N910U exynos.
Flashed 2.8.1.2 sucessfully.
Tried to do backup and getting error in red "unknown action".
Actually, anything I try to do in TWRP I'm getting the above error.
I've tried flashing via odin with the .tar & via CWM recovery with .zip file with same results.
Anyone else having this problem?

---------- Post added at 11:17 PM ---------- Previous post was at 11:10 PM ----------

Hi there.
I'm on N910U exynos.
Flashed 2.8.1.2 sucessfully.
Tried to do backup and getting error in red "unknown action".
Actually, anything I try to do in TWRP I'm getting the above error.
I've tried flashing via odin with the .tar & via CWM recovery with .zip file with same results.
Anyone else having this problem?

Whoops, looks like I read it wrong.
Will try 2.8.1.1 & see if that works...

---------- Post added at 11:38 PM ---------- Previous post was at 11:17 PM ----------

Ok, flashed 2.8.1.1.
Semmed to flash ok but when holding down volume up, home and power buttons it hangs at the "galaxy note 4' scrren and doesn't enter TWRP.
Have to pull battery to restart.
2.8.1.2 flashes ok but any command throws the unknown action error.
2.8.1.1 flashes ok but I can't enter recovery.
Any ideas anyone?
 

kondronaute

Senior Member
Nov 12, 2011
531
85
Hi there.
I'm on N910U exynos.
Flashed 2.8.1.2 sucessfully.
Tried to do backup and getting error in red "unknown action".
Actually, anything I try to do in TWRP I'm getting the above error.
I've tried flashing via odin with the .tar & via CWM recovery with .zip file with same results.
Anyone else having this problem?

---------- Post added at 11:17 PM ---------- Previous post was at 11:10 PM ----------



Whoops, looks like I read it wrong.
Will try 2.8.1.1 & see if that works...

---------- Post added at 11:38 PM ---------- Previous post was at 11:17 PM ----------

Ok, flashed 2.8.1.1.
Semmed to flash ok but when holding down volume up, home and power buttons it hangs at the "galaxy note 4' scrren and doesn't enter TWRP.
Have to pull battery to restart.
2.8.1.2 flashes ok but any command throws the unknown action error.
2.8.1.1 flashes ok but I can't enter recovery.
Any ideas anyone?
same for me
With 2.8.1.1 If You wait a long time you finally enter recovery
It take ages also to reboot from system to recovery.
The 2.8.1.2 Is not working.
Hope a Fix soon :confused:
 

Al Asmi

Senior Member
Feb 10, 2008
267
126
Hi there.
I'm on N910U exynos.
Flashed 2.8.1.2 sucessfully.
Tried to do backup and getting error in red "unknown action".
Actually, anything I try to do in TWRP I'm getting the above error.
I've tried flashing via odin with the .tar & via CWM recovery with .zip file with same results.
Anyone else having this problem?

---------- Post added at 11:17 PM ---------- Previous post was at 11:10 PM ----------



Whoops, looks like I read it wrong.
Will try 2.8.1.1 & see if that works...

---------- Post added at 11:38 PM ---------- Previous post was at 11:17 PM ----------

Ok, flashed 2.8.1.1.
Semmed to flash ok but when holding down volume up, home and power buttons it hangs at the "galaxy note 4' scrren and doesn't enter TWRP.
Have to pull battery to restart.
2.8.1.2 flashes ok but any command throws the unknown action error.
2.8.1.1 flashes ok but I can't enter recovery.
Any ideas anyone?
2.8.1.1 and 2.8.1.2 been tested for flashing roms, flashing zips and other mods, backup and restore and all was good. No problems whatsoever. You guys must be having something wrong at your end.

Sent from my SM-N910C
 

kondronaute

Senior Member
Nov 12, 2011
531
85
2.8.1.1 and 2.8.1.2 been tested for flashing roms, flashing zips and other mods, backup and restore and all was good. No problems whatsoever. You guys must be having something wrong at your end.

Sent from my SM-N910C

you are wrong we are 3 to have same pbm with 2.8.1.2 cannot backup to extcard say unknown pbm....
I installed it with odin
the 2.8.1.1 is working for me but take ages to enter recovery.
I am here from my S2 ......s3....s4.........................note4 ;)
 

Al Asmi

Senior Member
Feb 10, 2008
267
126
you are wrong we are 3 to have same pbm with 2.8.1.2 cannot backup to extcard say unknown pbm....
I installed it with odin
the 2.8.1.1 is working for me but take ages to enter recovery.
I am here from my S2 ......s3....s4.........................note4 ;)
I'm not saying that you are wrong. What I'm trying to tell you is that you may be having problems with your extsd. Try to install a permission fix and try again. For me and for so many others it's working fine.



Sent from my SM-N910C
 
  • Like
Reactions: kondronaute

kondronaute

Senior Member
Nov 12, 2011
531
85
Try this :
https://app.box.com/s/ajtshutm4mfexzvp004x

Unzip then flash with flashify. Tested on N910C and have no issues.

Sent from my SM-N910C

can u give me tar version please i use odin

---------- Post added at 11:08 AM ---------- Previous post was at 11:04 AM ----------

Try this :
https://app.box.com/s/ajtshutm4mfexzvp004x

Unzip then flash with flashify. Tested on N910C and have no issues.

Sent from my SM-N910C

no need for tar i do what you say and it work fine :D
thank u
 

Al Asmi

Senior Member
Feb 10, 2008
267
126
can u give me tar version please i use odin

---------- Post added at 11:08 AM ---------- Previous post was at 11:04 AM ----------



no need for tar i do what you say and it work fine :D
thank u

Glad that it worked for you.
@bigbiff, this is the last version with corrected color (blue) you've posted at the testing thread.
I hope it will work for the others who's having problems with the tar file.


https://app.box.com/s/ajtshutm4mfexzvp004x

Sent from my SM-N910C
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 91
    [RECOVERY] TWRP 3.2.2-0 - TeamWin Recovery Project

    TeamWin is proud to present TWRP 3.2.2-0 for the Samsung Galaxy Note 4 (Exynos/Qualcomm International)!



    Youtube video: http://www.youtube.com/watch?v=RIvWVS_Rkxo

    Full TeamWin credits are on the TWRP page on the TeamWin website: http://teamw.in/project/twrp2

    Introduction:

    Team Win Recovery Project or twrp2 for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added a lot of our own features. It's a fully touch driven user interface , no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.

    Key Features:

    Touchscreen driven with real buttons and drag-to-scroll
    XML-based GUI that allows full customization of the layout true theming!
    Settings are saved to the sdcard and persist through reboots
    Ability to choose which partitions to back up and which to restore
    Ability to choose to compress backups now with pigz (multi-core processor support for faster compression times)
    Onscreen keyboard
    Decryption of /data
    Easy selection of internal/external storage
    See changelog below for new features

    In addition to the above new features, TWRP features a scripting engine that allows an app to send commands to the recovery for the recovery to perform during startup. We call this scripting engine OpenRecoveryScript. This engine will be put to use immediately in the GooManager app. GooManager will be able to install recoveries automatically for most supported devices. The app will also let you choose to install multiple zips from within Android, wipe cache & dalvik, and run a backup.

    We are looking for other talented developers, themers, and device maintainers if they are interested in helping with a free, open source project.

    Source Code:

    GitHub - https://github.com/omnirom/android_bootable_recovery

    Gerrit for TWRP Official Device Configs - http://gerrit.twrp.me

    Gerrit Instance - http://gerrit.omnirom.org

    If you have made your own twrp build for an unsupported device, please let us know. We might add your build to the list of unofficial builds. Bear in mind that we are working hard to add more devices and we may add your device to our official build list later.

    treltexx Device Config: TBD

    Kernel: https://github.com/bigbiff/android_...ub.com/bigbiff/android_kernel_samsung_trltexx

    DOWNLOAD:

    All official devices are listed at the top of the page on the Team Win website. Search for the device in the textbox.

    http://twrp.me


    Support:

    Click http://webchat.freenode.net/?channels=twrp for live support or join us in #twrp on Freenode IRC servers
    21
    Changelog

    See http://twrp.me for official release notes.


    3.0.2-0
    - Fix a bug with the input box that affected masked inputs (passwords). This fixes decrypt of full device encryption on devices that support decrypt. This bug also impacts encrypted backups. Users are highly encouraged to stop using 3.0.1 if you use encrypted backups or if you need decrypt of data in TWRP.
    - Add Greek translation to some builds.

    3.0.1-0

    -support new CM 13.0 pattern encryption (sultanqasim)
    -fix slow flashing issue due to modprobe (present on only some devices) (#twrp)
    -libtar updated to latest upstream and fixes (jcadduono)
    -fixes for loading custom themes (_that)
    -TWRP will now detect and install TWRP themes automatically through the normal zip install process (Dees_Troy)
    -translation updates - added Italian, Czech and Polish and significant updates to Dutch
    -progress bar improvements - progress bar updates during image flashing and better tracks progress during file system backups (tar) (Dees_Troy)
    -fix input box text display (Dees_Troy)
    -reboot option after zip install complete (bigbiff)
    -other mostly invisible bug fixes and improvements

    TWRP 3.0.0-0 is out now for all currently supported devices.

    What’s new in 3.0.0-0:

    Completely new theme - Much more modern and much nicer looking (by z31s1g)
    True Terminal Emulator - Includes arrow keys, tab and tab completion, etc. (by _that)
    Language translation - It won’t be perfect and especially some languages that require large font files like Chinese & Japanese won’t be availble on most devices. Also some languages may only be partially translated at this time. Feel free to submit more translations to OmniROM’s Gerrit. (mostly by Dees_Troy)
    Flashing of sparse images - On select devices you will be able to flash some parts of factory images via the TWRP GUI (by HashBang173)
    Adopted storage support for select devices - TWRP can now decrypt adopted storage partitions from Marshmallow
    Reworked graphics to bring us more up to date with AOSP - includes support for adf and drm graphics (by Dees_Troy)
    SuperSU prompt will no longer display if a Marshmallow ROM is installed
    Update exfat, exfat fuse, dosfstools (by mdmower)
    Update AOSP base to 6.0
    A huge laundry list of other minor fixes and tweaks

    WARNING: This is our first release in a long time. We have a lot of new and somewhat aggressive changes in this new release. The changes to the graphics back-end may cause some devices to not boot up properly or have other display-related issues. If you are not in a position to reflash an older build of TWRP, then wait until you are or at least wait until others have tried the new version for your specific device. You don’t want to end up with a non-working recovery and have to wait several hours or days to get to a computer to be able to fix it.

    Notes for themers: In addition to the udpated theme, we have introduced a theme version variable to the TWRP theme system. If the theme version does not match the version that TWRP expects, TWRP will reject the custom theme and load its stock theme. This change will ensure that people who update TWRP without updating their theme will still have a workable recovery. We have removed libjpeg support. The stock theme was only using a jpeg image for the splash / curtain. This change means that any custom themes will no longer be able to use jpeg images. It also means that tools used to repack recovery images with a different curtain / splash will need to be updated to use the new method.

    Version number notes: For a while we’ve been using a 4 digit version number and reserved the 4th digit for device-specific updates. For instance, we find and fix a device-specific issue like decryption of data on Nexus 5, we would release that as a 2.8.7.1. After a while, some people would start asking where 2.8.7.1 was for other devices. So, going forward we have decided to change the numbering scheme to 3.0.0-2, etc. Our hope is that this version numbering scheme will more clearly identify that the 4th digit does not indicate a version change for the code base.

    We need your help! The bulk of TWRP work is done by 3 people on a volunteer basis. We have pushed most of our device files to our github and we have a gerrit instance. If you have the ability, please help us maintain our official devices and/or add your device to our official device list. Thanks in advance!

    You can track the progress of builds here

    Head over to the devices page to find install instructions and download links.
    TWRP 3.0.0-0 is out now for all currently supported devices.

    What’s new in 3.0.0-0:

    Completely new theme - Much more modern and much nicer looking (by z31s1g)
    True Terminal Emulator - Includes arrow keys, tab and tab completion, etc. (by _that)
    Language translation - It won’t be perfect and especially some languages that require large font files like Chinese & Japanese won’t be availble on most devices. Also some languages may only be partially translated at this time. Feel free to submit more translations to OmniROM’s Gerrit. (mostly by Dees_Troy)
    Flashing of sparse images - On select devices you will be able to flash some parts of factory images via the TWRP GUI (by HashBang173)
    Adopted storage support for select devices - TWRP can now decrypt adopted storage partitions from Marshmallow
    Reworked graphics to bring us more up to date with AOSP - includes support for adf and drm graphics (by Dees_Troy)
    SuperSU prompt will no longer display if a Marshmallow ROM is installed
    Update exfat, exfat fuse, dosfstools (by mdmower)
    Update AOSP base to 6.0
    A huge laundry list of other minor fixes and tweaks

    WARNING: This is our first release in a long time. We have a lot of new and somewhat aggressive changes in this new release. The changes to the graphics back-end may cause some devices to not boot up properly or have other display-related issues. If you are not in a position to reflash an older build of TWRP, then wait until you are or at least wait until others have tried the new version for your specific device. You don’t want to end up with a non-working recovery and have to wait several hours or days to get to a computer to be able to fix it.

    Notes for themers: In addition to the udpated theme, we have introduced a theme version variable to the TWRP theme system. If the theme version does not match the version that TWRP expects, TWRP will reject the custom theme and load its stock theme. This change will ensure that people who update TWRP without updating their theme will still have a workable recovery. We have removed libjpeg support. The stock theme was only using a jpeg image for the splash / curtain. This change means that any custom themes will no longer be able to use jpeg images. It also means that tools used to repack recovery images with a different curtain / splash will need to be updated to use the new method.

    Version number notes: For a while we’ve been using a 4 digit version number and reserved the 4th digit for device-specific updates. For instance, we find and fix a device-specific issue like decryption of data on Nexus 5, we would release that as a 2.8.7.1. After a while, some people would start asking where 2.8.7.1 was for other devices. So, going forward we have decided to change the numbering scheme to 3.0.0-2, etc. Our hope is that this version numbering scheme will more clearly identify that the 4th digit does not indicate a version change for the code base.

    We need your help! The bulk of TWRP work is done by 3 people on a volunteer basis. We have pushed most of our device files to our github and we have a gerrit instance. If you have the ability, please help us maintain our official devices and/or add your device to our official device list. Thanks in advance!

    You can track the progress of builds here

    Head over to the devices page to find install instructions and download links.
    2.8.7.0

    - Initial ground work for software drawn keyboard (_that)
    - Fix handling of wiping internal storage on datamedia devices (xuefer)
    - Allow DataManager to set and read values from the system properties (xuefer)
    - Fix crash when taking screenshots on arm64 devices (xuefer)
    - Fix error message after an ORS script completes (Dees_Troy)
    - Fix crashes / error when creating encrypted backups (_that, Dees_Troy)
    - Add system read only option - more details below (Dees_Troy)
    - Add resize2fs and GUI option to run resize2fs (Dees_Troy)
    - Fix crash loop caused by empty lines in AOSP recovery command file (_that)
    - Prevent duplicate page overlays such as multiple lock screens (mdmower)

    System read only option: Devices that ship with 5.0 and higher as their initial OS are using block level OTA updates. With this style of OTA update, the update script checks to see if the system partition has ever been mounted read/write. Further, the script also usually runs an SHA sum of the entire system partition to detect if any changes have been made. If any changes have been made, the OTA update will refuse to install. Since not all OEMs and devices have factory images available, we have created a new feature in TWRP that detects if the system partition has ever been mounted read/write. If not, you will be prompted asking if you want TWRP to mount system as read/write. If you choose not to allow TWRP to mount as read/write, TWRP won't prompt to install SuperSU and TWRP won't try to patch the stock ROM to prevent TWRP from being replaced by stock recovery. The goal of this option is to hopefully allow the user to make a raw system image backup that they can use to get back to a state where they can take OTA updates again.

    resize2fs feature: On some devices like the Nexus 6, the factory images include a userdata image that is the proper size only for the 32GB units. If you flash the factory image to a 64GB Nexus 6, the data partition will appear as if it only has the free space of a 32GB device. Using the resize2fs option, TWRP can resize your data partition to take up the full space available. The resize2fs may also be useful to resize system partitions on devices where custom ROM system images don't take up the full partition space. Lastly, resize2fs may be useful in some cases to reserve the proper space at the end of a data partition for a full disk encryption key, should your partition be formatted incorrectly for some reason.

    This new version also marks our first set of full builds using our new jenkins build server. You can track the progress of builds at https://jenkins.twrp.me and we have taken additional steps to make it easier for device maintainers to step up and submit patches to our gerrit server at https://gerrit.twrp.me to help us keep devices up to date and working.

    2.8.6.1
    treltexx
    - fix color scheme again

    2.8.6.0

    - Allow mulitple overlays for popup boxes (Dees_Troy)
    - Add pattern style password entry for decrypt (Tassadar)
    - Keyboard improvements (_that)
    - Update AOSP base to 5.1 (Dees_Troy)
    - Reduce theme count to 5 and rely on scaling (Dees_Troy)
    - Various scaling improvements (Dees_Troy)
    - Improved handling of resources in the GUI (_that)
    - Make scroll bar size proportional to list size (_that)
    - Allow scoll lists to render without a header (_that)
    - Make console scroll per pixel with kinetic scrolling (_that)
    - Support styles in XML to reduce XML size and improve consistentcy (Dees_Troy)
    - Various other fixes and improvements (mdmower, bigbiff, codelover, etc)

    2.8.5.0
    - Scale the GUI - TWRP can read the theme's resolution and scale it up or down to fit the theme to your screen's resolution
    - Improve thread handling and move input handling into the main rendering thread to improve stability
    - Make MTP work even if unplugged and plugged back in
    - Unify scrollable list code and make kinetic scrolling feel more natural
    - Fix handling of mapped zip files for OTA updates (CM12 updater)
    - USB keyboards should now work on all devices that support USB host mode via a USB OTG cable
    - Add Cancel Backup capability
    - Other small fixes and improvements

    2.8.4.0
    - MTP fixes and improvements - you can now copy zips to the root of storage - thanks to _that
    - Add flashing of boot and recovery images via the TWRP GUI (Find the Images button on the Install page)
    - Fix some MTP related crashes and bugs
    - Eliminate TWRP toggling USB IDs during boot if MTP is enabled
    - Fix various adb sideload issues
    - Improve threading of actions
    - Eliminate separate thread for screen timeout
    - Update libblkid to 2.25.0
    - Use power button as back button on watch themes for easier navigation
    - Add mutex locking to data manager
    - Improve custom theme handling on encrypted devices
    - Allow the stock theme to be offset by build flags so we can center a lower res theme on a higher res screen especially for watches with round screens

    2.8.3.0

    - MTP fixes and improvements - you can now copy zips to the root of storage - thanks to _that
    - MTP will now tell the host PC that storage is removed instead of disabling MTP completely
    - MTP will now report the correct max file size based on the file system in use to the host PC (may fix transfer of large files)
    - Update and improve fix permissions and make fixing contexts optional
    - Update SuperSU in TWRP to 2.40 and update install process
    - Make TWRP work properly on AArch64 (Nexus 9 is now built in true 64-bit binaries and libraries)
    - Attempt to set correct permissions and contexts on all files placed in storage so backups will show in Android
    - Fix kernel panic during MTP start on some devices
    - Support unicode fonts on devices with True Type Font support
    - Fix slider value not showing sometimes (vibration settings page)
    - Toggle MTP off during adb sideload to set correct USB IDs
    - Reduce library requirements for 5.0 L decrypt
    - Other minor fixes and improvements


    2.8.1.2
    - 2nd release with everything working except ADB

    19
    [UNOFFICIAL][N910F][trltexx] TWRP 3.0.0-0

    To anyone interested, here is my build of TWRP 3.0.0-0 for N910F (trltexx):
    twrp-3.0.0-0-trltexx_mone.tar

    Just flash the file via ODIN

    EDIT
    Better use this version:
    13
    [test] twrp-3.1.0-0

    Hi there!

    We need someone brave enough to try out this test build of twrp-3.1.0:
    twrp-3.1.0-_mone-trlte.tar
    twrp-3.1.0-_mone-2-trlte.tar

    For now it has been tested only on my trltexx (SM-N910F), we need to know if it works for the rest of snapdragon models:
    trltedt(SM-N910G), trltetmo(SM-N910T), trltecan(SM-N910W8), trltespr(SM-N910P), trlteusc(SM-N910R4), trltevzw(SM-N910V)

    Keep an official version of twrp-3.0.2 close by to reflash it in case this build doesn't work.
    Flash the file via odin and make sure you can only install zip files for your device model and let us know.

    Thanks to everyone that is going to try it out.

    Regards,
    _mone
    11
    [UNOFFICIAL][N910F][trltexx] TWRP 3.0.0-0 v3

    Last update from my side.. adb and the rest should now work.
    Download: twrp-3.0.0-0-trltexx_mone.3.tar

    bigbiff and other recognized developers are working to fix all the TWRP3.0.0 issues for the Note4, follow the TWRP trltetmo thread.
    Probably we'll soon have a proper official build.