[Recovery] [Official] Twrp v3 For Lg Stylo 2 Plus

Search This thread

messi2050

Senior Member
Nov 1, 2012
2,299
3,285
1.jpg

Code:
*** Disclamer
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.

WARNING: The stock boot image has dm-verity, which prevents you from booting if you swipe to enable system modifications!
SOLUTION:
Flash a root such as SuperSU or phh-superuser. You can also flash no-verity-opt-encrypt.zip.

Supported Models :
MS550/K550

Prerequisites :
YOUR BOOTLOADER MUST BE UNLOCKED

How to unlock the bootloader :
1-enable oem unlock in the developer settings
2-reboot to fastboot [adb reboot bootloader] then issue this command [fastboot oem unlock]
note: this will wipe your data]
-If you have problems with the device drivers installed , you will need to install lg bridge, you can download it from here:
http://tool.lime.gdms.lge.com/dn/downloader.dev?fileKey=PWZO7A26B9UW

How to flash Twrp:
BOOT INTO FASTBOOT MODE:
With your phone off, connect your usb cable to your phone while holding VOLUME DOWN to boot into fastboot mode or just type [adb reboot bootloader] in the adb terminal

ONCE YOU ARE IN FASTBOOT MODE:
Open a command prompt and type "fastboot flash recovery <path_to_recovery.img>” without the quotation marks.
Example: fastboot flash recovery C:/Users/John/Desktop/recovery.img
[don't forget to extract the downloaded recovery zip to get the recovery.img]

WHEN THE FLASH COMPLETES: (Takes about 2 seconds)
On your phone, unplug the usb cable and power it off by taking out the battery and putting it back in.

BOOT INTO RECOVERY MODE FOR THE FIRST TIME
HOLD VOLUME DOWN + POWER until you see the LG logo and then temporarily release the POWER button, immediately pressing and holding it back down until you see the white prompt [factory reset] screen. You will NEVER release the volume down button in this process!

Use the hard keys to select "YES" and then "YES" again to boot into TWRP

How to Disable encryption and flash super su [Install Root]:
1. In TWRP, go to Wipe > Format Data. Enter the keyword ‘yes‘, in the provided space and enter. This will wipe the automatically encrypted filesystem, and decrypt it.
2. Once the wiping is done, reboot back into recovery. Go to Reboot > Recovery.
3. When the recovery boots again, connect your phone to the PC and Enable MTP under the Mount section.
4. Transfer the downloaded ‘no-verity-opt-encrypt-**.zip’ and ‘SR1-SuperSU-v2.78-SR1-20160915123031.zip to your internal storage or EXTSD
5. Disconnect the device now.
6. Tap on Install. Now, navigate your phone’s storage and select ‘no-verity-opt-encrypt-**.zip’. Finally swipe the ‘Swipe to confirm Flash’ button on the bottom of the screen.
7. The flashing process will merely take a few seconds. And when it’s done, follow the same method to flash the root package – SR1-SuperSU-v2.78-SR1-20160915123031.zip [/B]
Wait 1 or 2 minutes after the zip files are done flashing then reboot system and PROFIT! Your phone may take 3-5 minutes to boot the first time and it might boot-loop once or twice at the Metro PCS splash screen but don’t worry this is expected.


Downloads :
Twrp 3.1.1
https://twrp.me/lg/lgstylo2plus.html

Additional Downloads :
SuperSU stable by Chainfire
dm-verity and force encryption disabler
Notice: After the TWRP splash screen you will see the option to type in the password to decrypt the filesystem just ignore it and press the cancel button.

Credits :
TeamWin, My Testers @!Led*Eyes! @Djoec1983, My family

Device Tree:
https://github.com/TeamWin/android_device_lge_ph2n

Please hit the thanks button and conider to donate if you enjoy my work :highfive:

Paypal donation link: https://paypal.me/messi2050
 
Last edited:

g17123

Senior Member
Oct 19, 2015
62
4
Does this only work on metroPCS varients? I have a lg stylus 2 plus k557 which is non metro pcs.
 

lmcdaniel215

Senior Member
Apr 11, 2010
98
19
What are the commands though

Sent from my LG-D801 using XDA-Developers mobile app
Start with abd devices with the phone plugged in and on. To see if you have the proper files

Sent from my LGMS550 using Tapatalk

---------- Post added at 09:22 AM ---------- Previous post was at 09:19 AM ----------

What are the commands though

Sent from my LG-D801 using XDA-Developers mobile app
Here read this http://xdaforums.com/showthread.php?t=2277112

Sent from my LGMS550 using Tapatalk
 

Djoec1983

Senior Member
Mar 29, 2012
189
89
Providence
Google Pixel 6
No you need to be in fastboot. Power off your device and press volume down, while continuing to hold volume down plug in your USB cable. You should now be in fastboot. Open up a command prompt and try the command I mentioned above.
 
  • Like
Reactions: nickyhicky

Top Liked Posts

  • There are no posts matching your filters.
  • 80
    1.jpg

    Code:
    *** Disclamer
    * Your warranty is now void.
    *
    * We are not responsible for bricked devices, dead SD cards,
    * thermonuclear war, or you getting fired because the alarm app failed. Please
    * do some research if you have any concerns about features included in this ROM
    * before flashing it! YOU are choosing to make these modifications, and if
    * you point the finger at us for messing up your device, we will laugh at you.

    WARNING: The stock boot image has dm-verity, which prevents you from booting if you swipe to enable system modifications!
    SOLUTION:
    Flash a root such as SuperSU or phh-superuser. You can also flash no-verity-opt-encrypt.zip.

    Supported Models :
    MS550/K550

    Prerequisites :
    YOUR BOOTLOADER MUST BE UNLOCKED

    How to unlock the bootloader :
    1-enable oem unlock in the developer settings
    2-reboot to fastboot [adb reboot bootloader] then issue this command [fastboot oem unlock]
    note: this will wipe your data]
    -If you have problems with the device drivers installed , you will need to install lg bridge, you can download it from here:
    http://tool.lime.gdms.lge.com/dn/downloader.dev?fileKey=PWZO7A26B9UW

    How to flash Twrp:
    BOOT INTO FASTBOOT MODE:
    With your phone off, connect your usb cable to your phone while holding VOLUME DOWN to boot into fastboot mode or just type [adb reboot bootloader] in the adb terminal

    ONCE YOU ARE IN FASTBOOT MODE:
    Open a command prompt and type "fastboot flash recovery <path_to_recovery.img>” without the quotation marks.
    Example: fastboot flash recovery C:/Users/John/Desktop/recovery.img
    [don't forget to extract the downloaded recovery zip to get the recovery.img]

    WHEN THE FLASH COMPLETES: (Takes about 2 seconds)
    On your phone, unplug the usb cable and power it off by taking out the battery and putting it back in.

    BOOT INTO RECOVERY MODE FOR THE FIRST TIME
    HOLD VOLUME DOWN + POWER until you see the LG logo and then temporarily release the POWER button, immediately pressing and holding it back down until you see the white prompt [factory reset] screen. You will NEVER release the volume down button in this process!

    Use the hard keys to select "YES" and then "YES" again to boot into TWRP

    How to Disable encryption and flash super su [Install Root]:
    1. In TWRP, go to Wipe > Format Data. Enter the keyword ‘yes‘, in the provided space and enter. This will wipe the automatically encrypted filesystem, and decrypt it.
    2. Once the wiping is done, reboot back into recovery. Go to Reboot > Recovery.
    3. When the recovery boots again, connect your phone to the PC and Enable MTP under the Mount section.
    4. Transfer the downloaded ‘no-verity-opt-encrypt-**.zip’ and ‘SR1-SuperSU-v2.78-SR1-20160915123031.zip to your internal storage or EXTSD
    5. Disconnect the device now.
    6. Tap on Install. Now, navigate your phone’s storage and select ‘no-verity-opt-encrypt-**.zip’. Finally swipe the ‘Swipe to confirm Flash’ button on the bottom of the screen.
    7. The flashing process will merely take a few seconds. And when it’s done, follow the same method to flash the root package – SR1-SuperSU-v2.78-SR1-20160915123031.zip [/B]
    Wait 1 or 2 minutes after the zip files are done flashing then reboot system and PROFIT! Your phone may take 3-5 minutes to boot the first time and it might boot-loop once or twice at the Metro PCS splash screen but don’t worry this is expected.


    Downloads :
    Twrp 3.1.1
    https://twrp.me/lg/lgstylo2plus.html

    Additional Downloads :
    SuperSU stable by Chainfire
    dm-verity and force encryption disabler
    Notice: After the TWRP splash screen you will see the option to type in the password to decrypt the filesystem just ignore it and press the cancel button.

    Credits :
    TeamWin, My Testers @!Led*Eyes! @Djoec1983, My family

    Device Tree:
    https://github.com/TeamWin/android_device_lge_ph2n

    Please hit the thanks button and conider to donate if you enjoy my work :highfive:

    Paypal donation link: https://paypal.me/messi2050
    19
    Guys
    Do you still want lineage 14.1 on this device ? Just today i managed to see los bootlogo lol so wanted to know if there are any still interested.

    Yes, very interested

    Yes... I am interested
    Great :good:, 48 more to go, just hit the thanks button on my post and i will check the final numbers.
    16
    Say hello to lineage 13 :D
    Notice: all this rom work and the current progress was done by me and me only, just wanted to make everything clear I'm the one who is working on it daily for more than 7 hours in the last days....
    Compiled on Nu-Guy pc.
    12
    trying to port miui, porting it from cm would be much easier so I am very interested.

    been working on it for 7 hours today , errors are keeping appear but i believe only few are left..
    10
    Great news I got it to compile and boot last night. Radio, camera and finger print scanner didn't work though . I found a tool to help me fix these issues I will work on it more tonight!!!

    I configured all the .mk files and boot config files correctly so look like it might be done pretty soon.

    Yeah buddy

    http://xdaforums.com/showthread.php?t=2794413&page=6

    This will help me track down what's blobs in missing