Remove All Ads from XDA

[Exclusive]( WM6.1 ) Windows Mobile 6.1 Eng for HP IPAQ rx1950

54 posts
Thanks Meter: 13
By victory144, Member on 30th April 2009, 10:14 PM
Post Reply Email Thread
Exclusive Windows Mobile 6.1 ( WM6.1 ) English for HP IPAQ rx1950

Done by Victory144 & Guifort

Tested and all work very well....





Mirros by Guifort...

See YouTube Short Demonstration Video

See YouTube Long Demonstration Video *Best Quality*

Windwos Mobile 6.1 For Ipaq rx1950 KITCHEN (For Devolopers and Advanced Users Only)
Download. MediaFire


Windows XP only.

1. Connect you Device To PC "USB CONNECTION" with Microsoft ActivSync Installed...

2. Follow the instruction .. (May appear some device notification to
allow recognize of the device correctly and changes to flash mode etc " You Must Always Click Accept" or you will not be able to flash your device)

3. Run "hpRUU" tools to and follow the instruction.
If the program can not flash for some reason, try to put your device in "Flash Mode" Manually by pressing "Contact + Email + Reset together" and try again.

4. When the process finish ..The device will restart automatically.

5. When the boot loader is loading Make HARD RESET ( By Holding " CALENDAR + WIRELESS + Reset " For 3 Second !

6. Wait to re boot... "it may take about 2 or 3 Minute for the First time" ....

7. Calibrate the screen as Usually ..

8. Now go to " Start / Programs / Address Book " Run that Allow the two files needed ( By Accepting the notification Bellow)

9. In the same program go to "Menu /Option" And In the first tap "General" Mark this options :

Set as default contact manager
Assign on hardware button

10. Then Press OK ... Exit the program

11. Soft Reset...

12. Accept the notification about the WIFI program ! Then will appear in the Today menu the WIFI Icon where you can Power On /Off the wireless ....(As the default "Hp Wireless manager" dose not work properly).


Optional you can install the office cap as usually ! included ...

4th May 2009, 10:19 AM |#2  
Junior Member
Thanks Meter: 0
Great job - it's wonderful -so far just one minor problem. Task manager is still in Russian in "programs". UC and .NETCF 3.5 would make it even better.....
7th May 2009, 03:15 AM |#3  
OP Member
Thanks Meter: 13
Thanks ...

The task manager can be changed from File Explorer / root / Windwos/Start Menu/programs/ then Select that Rename to Task Manager .. Its Done !

NETCF 3.5 i cant cuz theres no more space to add any thing on the rom as it 32 MB !
18th May 2009, 12:03 PM |#4  
Junior Member
Thanks Meter: 0
I run the hpRUU at one time it says Unknown Device. What should i do?
22nd May 2009, 01:53 AM |#5  
Junior Member
Thanks Meter: 0
Very Nice!!
I've used this rom for a couple of weeks now and so far only one problem, the wireless connection fails to reconnect after the power is turned off. I have figured out a way to circumvent this problem. Uninstall the WifiIO and use the wireless button as you would in WM5, but before it disconnects pick the view wireless networks link and press Menu -> Turn Wireless On. What a PIA, but the faster operating system definately makes up for it. Thanks a bunch Victory!
25th May 2009, 04:02 AM |#6  
OP Member
Thanks Meter: 13
2 "rubarht123" You are welcome ! Thanks for the tip .. Can you be more clearly about yuor setting ?

2 ".bin" Make sure youve Microsoft Active Sync installed and the Ipaq connected to it ! Then try !.....Good Luck ...
1st June 2009, 06:20 AM |#7  
Thanks Meter: 0
Rom for Ipaq h5550?
I hope I am not committing some sort of faux pas by asking this, but what would you charge for a WM6.1 rom for an Ipaq h5550? I could supply a machine for testing.

I am dead serious about this and am willing to pay. Please advise.

5th June 2009, 02:24 AM |#8  
Junior Member
Thanks Meter: 0
Re: Settings
I'm not sure what you mean by settings, but the wm5 normal button for wifi is rendered useless under have to use wifiIO for some reason. I have sktools free version installed and could have deleted reg setting don't know though. Reinstall wifiIO and still disconnects after power. I've looked in windows dir. for wifion.exe but only find wifioff. Prefer wm5 button to wifiIO, wish there was a way to get it working again. Thanks.
13th June 2009, 11:14 AM |#9  
Junior Member
Thanks Meter: 0
6.1 installation
I downloaded the software thanks btw

extracted files
connected pda with activesync
launched hpRUU.exe
followed on screen instructions
watched progress on pda
I now have an error wrong image on pda when i try to reset.

tried relauncing exe but i have no comms to pda from pc.

Help please!
18th July 2009, 03:35 PM |#10  
Senior Member
Thanks Meter: 32

Your pda can't boot ? you can reflash it with the SD Card method if you have make a backup.
20th July 2009, 05:13 AM |#11  
OP Member
Thanks Meter: 13
2 "BTE72"

Please see this thread :
Post Reply Subscribe to Thread

english, hp ipaq, rx1950, windows mobile 6.1, wm6.1

Guest Quick Reply (no urls or BBcode)
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes