Remove All Ads from XDA


5 posts
Thanks Meter: 0
By lpluigi, Junior Member on 7th May 2010, 02:37 PM
Post Reply Email Thread
can someone help me, im tryin to figure out how to setup myn warm donut to ppp=nostart=1, where the data connection if off upon startup. where can i change this, is this in the build.prop. Or if someone can provide an androidupdate.tar that does it? I have no data on my plan and I find that if data is set to start on startup, it acts funny when making voice calls (turns off, disconnects, etc..). But if ppp=nostart is set to 1, voice calls are fine. Does any one that is on a plan with no data have this issue?
7th May 2010, 05:13 PM |#2  
Retired Forum Moderator
Thanks Meter: 231
Used to be we'd set this in the kernel command line, are you booting from an nbh or from haret?
7th May 2010, 06:24 PM |#3  
OP Junior Member
Thanks Meter: 0
im booting from nbh. before, when i used to boot from haret, it was easy, i just inserted a command line (ppp=nostart=1) in the default.txt and there was no data upon startup. but when booting from nbh, i dont know where i would change that, is it in the build.prop?
7th May 2010, 06:36 PM |#4  
Retired Forum Moderator
Thanks Meter: 231
Try this,
1. First, open phone dialer,
2. Press *#*#4636#*#* to bring up Testing screen,
3. Tap on Phone Information on the menu,
4. Press menu button on the phone,
5. Choose More,
6. Tap on Disable data connection/disable data connection on boot.

Should work
7th May 2010, 07:57 PM |#5  
OP Junior Member
Thanks Meter: 0
that worked, YOU ARE DA MAN , thanks
10th May 2010, 12:33 PM |#6  
icreative's Avatar
Senior Member
Flag Odessa
Thanks Meter: 17
Donate to Me
*#*#4636#*#*, how i can activate EVDO Avto?? Because ping only GPRS/UMTS(i have CDMA device), and syck doesn'twork, but data at browser work very well!
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes