FORUMS

Help - MEGABRICK

201 posts
Thanks Meter: 42
 
By alucine, Senior Member on 30th June 2010, 03:07 PM
Post Reply Email Thread
Hi

Yesterday with SEUS my X10 is bicked, today i try all this ways and all the same result BRICKED.

1º Several times with SEUS, 2 pcs, and not installed.

2º pccompanion connect to X10 but not identifie.

3º flashupdate with step 1 of root way, several times, KO

Code:
INFO: <<<ERR_SEVERITY="MAJOR";ERR_CLASS="PROTOCOL_CLASS";ERR_STATIC="UNVALID_COMMAND";ERR_DYNAMIC=""; 
30-jun-2010 12:11:52 X10flash writeCmd
INFO: write(cmd=10) (finish)
30-jun-2010 12:11:52 X10flash readReply
INFO: <<< cmd=10,flags=0,length=0
30-jun-2010 12:11:52 X10flash writeCmd
INFO: write(cmd=4) (finish)
30-jun-2010 12:11:52 X10flash readReply
INFO: <<< cmd=4,flags=1,length=0
30-jun-2010 12:11:52 X10flash run
INFO: ###test end.
4º With special pack unbrick XIOFUB, the same result, KO

hotfile.com/dl/44983907/9d54b5e/XIOFUB.rar.html

5º With Omnius, the same result, KO

Code:
13:11:49   Flash
13:11:49   Allows to change languages supported by the phone and upgrade its firmware.
13:11:49   Operating system: Microsoft Windows XP Home Edition Service Pack 3 (build 2600)
13:11:49   Application version: 0.04.2151 (beta)
13:11:49 . The action name is 'Flash'
13:11:49   Selected phone type: Xperia™ X10
13:11:49 i Instructions
13:11:49 i 1. Make sure the phone battery is charged to at least 50%.
13:11:49 i 2. Switch off the phone!
13:11:49 i 3. Remove the phone battery and wait at least 5 seconds before reinserting it!
13:11:49 i 4. Press and hold the return back button, then connect the cable to the phone!
13:11:49 . The action started waiting for the user
13:12:31 . The action finished waiting for the user
13:12:31   Conectado por medio de Dispositivo Flash USB SEMC (USB1)...
13:12:31   Version del controlador: 2.2.0.5
13:12:31   Cip detectado: QSD8250
13:12:31   Modo de Arranque: EROM
13:12:31   IMEI: 
13:12:31   Enviando Cargador...
13:12:33   Establishing connection to the server...
13:12:38   Receiving news...
13:12:39 i No news
13:12:40   Actual credit: 0.00
13:12:46   Writing file R1FA016_APP_SW_RACHAEL_GENERIC_1227_4612_S1_SW_LIVE_AC12_0001_S1_PARTITION.zip...
13:13:16 e ¡Fallo!
13:13:16 . The action entered shutdown phase
13:13:16 . The action reported failure

Error code
# C882780696072EA7

Detalles del error
---
11 2C C9 F3 6E FE 3A DF 5C 3D FE F8 38 EA 82 99 
EE D9 94 3C B0 8F 36 FB 3D B5 B1 B8 86 08 EE A7 
44 5B AA 5E 60 2C A6 D1 86 58 4C 8A E8 79 A2 23 
11 08 38 33 3E 30 EA 6F D4 29 2A D4 0A 7E 9C 18 
DC B5 8A 47 D4 C6 F8 BF B2 4C C2 35 08 29 3E C9 
14 65 FA E3 70 CF A4 62 F4 3D CE 0B 18 76 AE 99 
04 EB 62 74 CE B3 9A 01 04 1D A2 D5 D8 C3 D6 3C 
61 E8 
---
6º With Davinci, the same result, KO

Code:
Getting Software List From Server For: X10 / 0001 / Red...
SELECTED: Flash / Debrand / Re-Brand [SonyEricsson] X10 / 0001 / Red / R2BA020 / O2 DE/LUSTER WHITE (1233-2794/R14A | GENERIC)
Script Execution Started...
Checking Files...
Downloading 85Kb...OK! (1 sec)
Downloading 16268Kb...OK! (47 sec)
Downloading 131984Kb...OK! (413 sec)
Starting up... 
Script initialization. Please wait... 
Loading S1 Loader... OK
        20091222 15:39:00 S1_LOADER R4A024 1226-2250
        Memory Stick: 8GB
Opening TA...OK
Reading TA Please Wait...OK
Closing TA...OK
Opening MiscTA...OK
Reading TA Please Wait...OK
Requesting Account Status...OK
User: 49574 / Credits: 0 / Counters: 10
Writing TA Data...OK
Writing APP-SW/amss_fs.sin...OK
Writing APP-SW/apps_log.sin...OK
Writing APP-SW/amss.sin...OK
Writing APP-SW/fota0.sin...OK
Writing APP-SW/fota1.sin...OK
Writing APP-SW/recovery.sin...
Error! SIN Body Block Not Accepted! Done 0x575000 of 0x575880
Writing APP-SW/dsp1.sin...
Error! APP-SW/dsp1.sin Header Is Not Accepted!
Writing APP-SW/boot.sin...
Error! APP-SW/boot.sin Header Is Not Accepted!
Writing APP-SW/cache.sin...
Error! FSP/cache.sin Header Is Not Accepted!
Writing APP-SW/preset.ta...FAILED
Error! SIN Body Block Not Accepted! Done 0x575000 of 0x575880
Writing APP-SW/dsp1.sin...
Error! APP-SW/dsp1.sin Header Is Not Accepted!
Writing APP-SW/boot.sin...
Error! APP-SW/boot.sin Header Is Not Accepted!
Writing APP-SW/cache.sin...
Error! FSP/cache.sin Header Is Not Accepted!
Writing APP-SW/preset.ta...FAILED
Failed To Write: 0x08FD Size 0x0010
Writing FSP/system_S1-SW-LIVE-AC12-0001-S1-PARTITION-WITH-SPARE.sin...
Error! FSP/system_S1-SW-LIVE-AC12-0001-S1-PARTITION-WITH-SPARE.sin Header Is Not Accepted!
Writing FSP/userdata_S1-SW-LIVE-AC12-0001-S1-PARTITION-WITH-SPARE.sin...
Error! FSP/userdata_S1-SW-LIVE-AC12-0001-S1-PARTITION-WITH-SPARE.sin Header Is Not Accepted!
Writing TA Data...FAILED
Starting Advanced Section... 
Closing TA...FAILED
Shutting Down...OK
Your X10 Has Been Successfully Updated!
Execution Time - 00:10:07
Done!
Loading User Info...
User:  / Credits: 0 / Counters: 10
30th June 2010, 06:11 PM |#2  
Member
Thanks Meter: 10
 
More
You are, of course putting the device into flash mode each try right?
30th June 2010, 06:15 PM |#3  
dan-htc-touch's Avatar
Senior Member
Flag calgary
Thanks Meter: 148
 
Donate to Me
More
what do you mean by bricked? bricked usually means unable to do anything including flash roms....
30th June 2010, 06:46 PM |#4  
alucine's Avatar
OP Senior Member
Flag Barcelona
Thanks Meter: 42
 
More
x edude03, of course always put return key and x10 is in flash mode.

x dan-htc-touch, bricked is like you say, power on my x10 and in 30/40 seconds one phone with warning appear in the screen.

May be this problems is by status battery < than 50% ?

thanks a lot

alucine
30th June 2010, 07:31 PM |#5  
Senior Member
Flag Madrid, Spain
Thanks Meter: 106
 
Donate to Me
More
Quote:
Originally Posted by alucine

x edude03, of course always put return key and x10 is in flash mode.

x dan-htc-touch, bricked is like you say, power on my x10 and in 30/40 seconds one phone with warning appear in the screen.

May be this problems is by status battery < than 50% ?

thanks a lot

alucine

I have a feeling that is has to do with an incompatible baseband (amss) currently on your phone, and the OS image...

the easy way: why don't you try the root method again?
30th June 2010, 07:43 PM |#6  
alucine's Avatar
OP Senior Member
Flag Barcelona
Thanks Meter: 42
 
More
Quote:
Originally Posted by rodrigofd

the easy way: why don't you try the root method again?

rodrigofd, if you look first post "way 3" is with root method of this forum, "way 4" is unbrick method of this forum, "way 5" is with Omnius server, and "way 6" is with Davinci server.

I think that is impossible, that 4 differents methods fail.

My last theory is battery status, it is possible to update firm with less than 50% battery ?

May be my X10 brick has less than 50% battery and ALL method fail buy this...

Anybody can updated x10 with less than 50% battery ?

Thanks agains.

alucine

P.D: Gracias amigo, desde Madrid
30th June 2010, 08:36 PM |#7  
instigator008's Avatar
Senior Member
Flag Mississauga
Thanks Meter: 40
 
More
I updated yesterday, using Omnius, with 38% battery. Then I rooted it. No problems here.
30th June 2010, 09:03 PM |#8  
Senior Member
Flag toronto
Thanks Meter: 28
 
More
when you tried with omnious , did you try to flash with software that was for your version of the x10, ie, did you use x10a software with an x10a or x10a software on a x10i?

my bricked phone came back to life only after flashing with the correct version of the software
30th June 2010, 09:09 PM |#9  
alucine's Avatar
OP Senior Member
Flag Barcelona
Thanks Meter: 42
 
More
instigator008 , sure that with 38% battery ? you are the first my friend

hondaguy, i sure that firmware is for X10i
30th June 2010, 09:59 PM |#10  
Junior Member
Thanks Meter: 0
 
More
by bricked you mean that you have a phone with a triangle on screen?

If so, I had the same problem.
what I did was to flash the latest firmware R2. This booted the phone for me.
Grab the flash tool, and download the Telenor R2 version from here
forum.xda-developers.com/showthread.php?t=683793

backup system.sin and userdata.sin from the flash folder, and rename the files that you got in the R2 rar to system.sin and userdata.sin (userdata.sin should be the file that is 5kb)

and then flashed it, this fixed the issue
30th June 2010, 10:12 PM |#11  
Senior Member
Thanks Meter: 0
 
More
stop what you are doing and start with the BASICS.

first of all if your phone goes to yellow triangle then it is not bricked so stop worrying


secondly re download an omnius firmware of your choice ( i suggest UK generic r1b0016 as it will prepare you for root )

i tell you to re-download because your old download may be corrupt

extract the file you downloaded so you get the 2 .zip files

try omnius again. large zip in top , small zip in bottom

if that fails then try from different a computer.
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes