FORUMS
Remove All Ads from XDA

Epic Dailer Codes

604 posts
Thanks Meter: 118
 
By ghostrid3r, Senior Member on 10th October 2010, 07:56 PM
Post Reply Email Thread
Disclaimer: I do not take responsibility for any problems that may result from the use of these codes. In other words, use at your own risk!!!

To use these codes, you simply open up your phone dialer, and type them in.

*#1472365# - GpsSetup
Very useful tests for the GPS!!!
Setup/Position Mode/ Operation Mode: (Standalone/MSAssisted/MSBased) Starting Mode: (Cold Start/Warm Start/Hot Start) Session Type: (Single Fix/Navigation) Setup/Command allows you to test the GPS and look at the results

*#INFO*1111# - Testing
Phone information/Battery information/Battery history/Usage statistics
Very useful diagnostics

*#0*# - LCD TEST
red/green/blue/melody/vibration/dimming/megacam/Sensor/touch/sleepmode/LED/RECEIVER
Very useful tests for the LCD

##RTN# - Real-Time Network (RTN)
Lots of useful information, like the Life timer / calls and Life Byte usage stats

*#DATA*727336*# - DataCreate
Call log/System Space/User Space/Phone Book/Schedule/Message/Ring tone/Screen/IMEI/ESN/Error log
Very useful information!!!

*#0228# - BatteryStatus
Very useful real-time battery statistics!

##UPST# - PhoneUtil - UART/USB
Universal Asychronous Receiver/Transmitter / Universal Serial Bus
Most likely controls how you connect technician testing equipment to test out the UART/USB subsystems

##DATA# - Data Programming - Requires MSL
User Name/Advanced/Restore/Enable HFA/DSA Server/MMSC/URL/Multimedia/WorkMode/WiMAX
I don't have my MSL (Master Subsidy Lock) code, so I can't test this

##DEBUG# - Debug Menu - Requires MSL
Debug Screen/Test Calls/RC Data/HDR/1X Selection/Voice Privacy/DTMF Set/Korea Mode Set
I don't have my MSL (Master Subsidy Lock) code, so I can't test this

##AKEY# - Data A key menu - Requires MSL
I don't have my MSL (Master Subsidy Lock) code, so I can't test this

##<MSL># - Master Subsidy Lock - Requires MSL
Program your Mobile Device Number(MDN) and Mobile Station ID(MSID)
The <MSL> is your phone's Master Subsidy Lock, a 6 digit code, you can sometimes get it from Sprint

##GPSCLRX# - Reset the GPS - Requires MSL
I don't have my MSL (Master Subsidy Lock) code, so I can't test this

##SCRTN# - Changes DSA back to Factory - Requires MSL
I don't have my MSL (Master Subsidy Lock) code, so I can't test this

##TTY# - TTY TestMode

*#0842# - Device Test - Vibration Test

*#0673# - MelodyTest

*#7780# - Factory data reset

*#232331# - BluetoothTest

*#2664# - Touchscreen Accuracy Test
Nice if you want to see how accurate your touchscreen is

*#0283# - ServiceMode - PACKET LOOPBACK
Need to hit home to get out - I couldn't get this to do anything but it could be the data packet that you sent coming back to you on the loopback device

*#767*3855# - Factory Format - WARNING!!!
Will go to Hands Free Activation
Nice if you'd like to reactivate your phone, it will do so automatically

*#197328640# - ServiceMode - Menu key to bring up menu - WARNING!!!
Will turn off your radio - Not sure what this does

*#0011# - ServiceMode - Force Closes - Menu key to bring up menu
Will turn on your radio, and then reboot

*#32489# - ServiceMode - Force Closes - Menu key to bring up menu
Doesn't seem to affect the radio

*#2580# - ServiceMode - Not sure what this does

*#0782# - RTCTimeRead - Displays Date and Time

*#745# - Sec_RIL_Dump - Has the LogFileList
Copy to phone memory/Copy to SD card(grayed out)/View Ril Log(grayed out)/Clear Ril Log/Exit
Probably dumps the logs for the Radio Interface Layer (RIL) between the Operating System and the phone's radio and modem
I haven't tested a dump yet

*#9900# - SysDump
copy logcat/dumpstate/dumpsys/enable debug log/copy/watchdogdumpstatelog
Probably dumps the logs for the Operating System kernel
I haven't tested a dump yet

This has been posted several times, but I thought it might be useful for some people who may not have seen it.

To get into the Android system recovery/Samsung Recover Utils
Turn off phone, hold volume down, the power button, and the camera button at the same time to enter the recovery partition, and recover the phone
Use Volume keys to move among options, and the Home key to select

reboot system now
apply sdcard:update.zip - Manually update from your SD card
wipe data/factory reset
wipe cache partition - Didn't do anything for me

I hope you find this to be useful information. Feel free to add other codes you have discovered, or correct any misunderstanding I may have about what a certain code does.
The Following 10 Users Say Thank You to ghostrid3r For This Useful Post: [ View ] Gift ghostrid3r Ad-Free
 
 
10th October 2010, 08:04 PM |#2  
Senior Member
Thanks Meter: 26
 
More
Quote:
Originally Posted by ghostrid3r

Disclaimer: I do not take responsibility for any problems that may result from the use of these codes. In other words, use at your own risk!!!

To use these codes, you simply open up your phone dialer, and type them in.

*#1472365# - GpsSetup
Very useful tests for the GPS!!!
Setup/Position Mode/ Operation Mode: (Standalone/MSAssisted/MSBased) Starting Mode: (Cold Start/Warm Start/Hot Start) Session Type: (Single Fix/Navigation) Setup/Command allows you to test the GPS and look at the results

*#INFO*1111# - Testing
Phone information/Battery information/Battery history/Usage statistics
Very useful diagnostics

*#0*# - LCD TEST
red/green/blue/melody/vibration/dimming/megacam/Sensor/touch/sleepmode/LED/RECEIVER
Very useful tests for the LCD

##RTN# - Real-Time Network (RTN)
Lots of useful information, like the Life timer / calls and Life Byte usage stats

*#DATA*727336*# - DataCreate
Call log/System Space/User Space/Phone Book/Schedule/Message/Ring tone/Screen/IMEI/ESN/Error log
Very useful information!!!

*#0228# - BatteryStatus
Very useful real-time battery statistics!

##UPST# - PhoneUtil - UART/USB
Universal Asychronous Receiver/Transmitter / Universal Serial Bus
Most likely controls how you connect technician testing equipment to test out the UART/USB subsystems

##DATA# - Data Programming - Requires MSL
User Name/Advanced/Restore/Enable HFA/DSA Server/MMSC/URL/Multimedia/WorkMode/WiMAX
I don't have my MSL (Master Subsidy Lock) code, so I can't test this

##DEBUG# - Debug Menu - Requires MSL
Debug Screen/Test Calls/RC Data/HDR/1X Selection/Voice Privacy/DTMF Set/Korea Mode Set
I don't have my MSL (Master Subsidy Lock) code, so I can't test this

##AKEY# - Data A key menu - Requires MSL
I don't have my MSL (Master Subsidy Lock) code, so I can't test this

##<MSL># - Master Subsidy Lock - Requires MSL
Program your Mobile Device Number(MDN) and Mobile Station ID(MSID)
The <MSL> is your phone's Master Subsidy Lock, a 6 digit code, you can sometimes get it from Sprint

##GPSCLRX# - Reset the GPS - Requires MSL
I don't have my MSL (Master Subsidy Lock) code, so I can't test this

##SCRTN# - Changes DSA back to Factory - Requires MSL
I don't have my MSL (Master Subsidy Lock) code, so I can't test this

##TTY# - TTY TestMode

*#0842# - Device Test - Vibration Test

*#0673# - MelodyTest

*#7780# - Factory data reset

*#232331# - BluetoothTest

*#2664# - Touchscreen Accuracy Test
Nice if you want to see how accurate your touchscreen is

*#0283# - ServiceMode - PACKET LOOPBACK
Need to hit home to get out - I couldn't get this to do anything but it could be the data packet that you sent coming back to you on the loopback device

*#767*3855# - Factory Format - WARNING!!!
Will go to Hands Free Activation
Nice if you'd like to reactivate your phone, it will do so automatically

*#197328640# - ServiceMode - Menu key to bring up menu - WARNING!!!
Will turn off your radio - Not sure what this does

*#0011# - ServiceMode - Force Closes - Menu key to bring up menu
Will turn on your radio, and then reboot

*#32489# - ServiceMode - Force Closes - Menu key to bring up menu
Doesn't seem to affect the radio

*#2580# - ServiceMode - Not sure what this does

*#0782# - RTCTimeRead - Displays Date and Time

*#745# - Sec_RIL_Dump - Has the LogFileList
Copy to phone memory/Copy to SD card(grayed out)/View Ril Log(grayed out)/Clear Ril Log/Exit
Probably dumps the logs for the Radio Interface Layer (RIL) between the Operating System and the phone's radio and modem
I haven't tested a dump yet

*#9900# - SysDump
copy logcat/dumpstate/dumpsys/enable debug log/copy/watchdogdumpstatelog
Probably dumps the logs for the Operating System kernel
I haven't tested a dump yet

This has been posted several times, but I thought it might be useful for some people who may not have seen it.

To get into the Android system recovery/Samsung Recover Utils
Turn off phone, hold volume down, the power button, and the camera button at the same time to enter the recovery partition, and recover the phone
Use Volume keys to move among options, and the Home key to select

reboot system now
apply sdcard:update.zip - Manually update from your SD card
wipe data/factory reset
wipe cache partition - Didn't do anything for me

I hope you find this to be useful information. Feel free to add other codes you have discovered, or correct any misunderstanding I may have about what a certain code does.

An easy way to get your MSL is by using the "getprop" command in ADB or with connectbot using a connection to "localhost". It's the 6 numbers next to the label "ril.MSL".
The Following User Says Thank You to richse For This Useful Post: [ View ] Gift richse Ad-Free
10th October 2010, 08:10 PM |#3  
asj2583's Avatar
Senior Member
Flag San Antonio, Texas
Thanks Meter: 74
 
Donate to Me
More
nice should be stickied *wink*wink*
10th October 2010, 08:27 PM |#4  
Senior Member
Thanks Meter: 5
 
More
Quote:
Originally Posted by asj2583

nice should be stickied *wink*wink*

I've already added it to the sticky wiki
10th October 2010, 08:28 PM |#5  
OP Senior Member
Flag D/M/V
Thanks Meter: 118
 
More
Quote:
Originally Posted by thematrixkid17

I've already added it to the sticky wiki

Thanks!

10char
10th October 2010, 10:45 PM |#6  
Senior Member
Thanks Meter: 26
 
More
dont forget:
##3282#
Multimedia
here you can stop sprints traffic filtering!!!
edit- just figured out that spells data!!

EDIT (more details):
Select multimedia- then enter your MSL code
Change rtsp proxy to 0.0.0.0 and rtsp proxy port to 0
see here for original thread
I used this to allow me to used the hava android app over 3G- others have used it to fix skyfire video
10th October 2010, 11:20 PM |#7  
jjjjayd13's Avatar
Senior Member
Thanks Meter: 37
 
More
Question How?
Quote:
Originally Posted by jimmyz

dont forget:
##3282#
Multimedia
here you can stop sprints traffic filtering!!!
edit- just figured out that spells data!!

How? What info needs to be enter? Where?

TIA,

jjjjayd13,
10th October 2010, 11:24 PM |#8  
Geniusdog254's Avatar
Retired Recognized Developer
Flag St. Louis
Thanks Meter: 168
 
Donate to Me
More
Quote:
Originally Posted by jjjjayd13

How? What info needs to be enter? Where?

TIA,

jjjjayd13,

Would like to know as well.
10th October 2010, 11:27 PM |#9  
Senior Member
Thanks Meter: 502
 
More
I see in under the *#INFO*1111# one that there is a setting called :

Set Preferred Network Type

and mine is set to "Unknown". Is this the source of our TWS problems?
10th October 2010, 11:52 PM |#10  
Senior Member
Thanks Meter: 26
 
More
Quote:
Originally Posted by jjjjayd13

How? What info needs to be enter? Where?

TIA,

jjjjayd13,

Quote:
Originally Posted by Geniusdog254

Would like to know as well.

I edited my original post
10th October 2010, 11:54 PM |#11  
OP Senior Member
Flag D/M/V
Thanks Meter: 118
 
More
Quote:
Originally Posted by muyoso

I see in under the *#INFO*1111# one that there is a setting called :

Set Preferred Network Type

and mine is set to "Unknown". Is this the source of our TWS problems?

Confirmed. My default is also "Unknown", try "CDMA only" and toggle airplane mode off/on, then let us know what/if anything happens with TWS.
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes