FORUMS
Remove All Ads from XDA

[KERNEL][SENSE] - SBC. Update: 1/18/11 All kernels put back up!

1,877 posts
Thanks Meter: 632
 
By ms79723, Senior Member on 17th December 2010, 08:31 AM
Post Reply Email Thread
Thanks to Netarchy, Toast, Myn, and Hot_Hands. Big Thanks to NewZJ for helping me test this damn near all day for the past couple of days.

This kernel is based off of Netarchy's 4.2.1 Universal More Aggressive Kernel, so expect the same results when flashing this.

What I've been working on with this kernel is the charging aspect. Desire users have their battery tweak, so I've been working on one for us. With this kernel you'll be able to get the trickle charging experience you've always wanted. I slapped a WIP tag on this thread because although I have gotten this trickle charging to work, I still have some other things I need to iron out and also add.

Things need to fix:
-nothing!

Features:
-All of Netarchy's goodies
-Trickle Charging (AC & USB)
-Full battery charging. Charge your battery to maximum capacity
-Full battery charging for all extended batteries.
-Accurate measurement of voltage while on the charger. Usually on the charger on other kernels, the voltage will still read +4.193V even when the battery is draining on the charger. Now you get to see the draining, so when you pick up the phone in the morning and its not finished with its trickle charging session, you can wait a minute or two until it's done.
-You also no longer need to wipe battery stats.


Lemme clear the air...


- I should clarify. If your phone is at 100% and you're using your phone on the charger, there's a possibility that it will turn off the charger. If your phone is not at 100% then there is absolutely no way the charger will turn off and you can use your phone all you want on AC or USB. And with USB, even if your phone is past 100% you can use it on the charger. So if you're hours upon hours past 100% and you decide to use your phone to do heavy duty work (surf the web for more hours, play some games, listen to some music, stream something), the charger may turn off.

You know when this is working when...


You know this is working when you're 30 minutes past 100% and you don't see any -mA's in the battery widget monitor app (go download from Market, it is free!). If you start seeing -mA's on the charger at any point while charging past 100%, the charger has turned off and this isn't working for you. The only reason the charger will turn off is if you go over the voltage limit. The only way you can possibly go over the voltage limit is if you are using your phone while charging on AC. That is the only way

Will this damage my battery?
Well...this is a running experiment. 8 people have reported battery issues with no real evidence of such thing other than their word. Electrical engineers have spoken of the danger but have yet to conduct an experiment of their own so...use at your own risk! This kernel could possibly blow up your phone, ruin your credit, steal your late night snacks and slap a baby turtle so USE AT YOUR OWN RISK! I AM NOT RESPONSIBLE FOR ANY OF THOSE THINGS (contact PETA about the baby turtle..not me).



my-github
netarchy's-github[/CENTER]
The Following 190 Users Say Thank You to ms79723 For This Useful Post: [ View ] Gift ms79723 Ad-Free
 
 
17th December 2010, 08:31 AM |#2  
ms79723's Avatar
OP Senior Member
Thanks Meter: 632
 
More
KERNEL BUILDS
Check 4th post for FAQ's and what not! You only need to flash ONE !!!
SENSE BUILDS






12/25/10: v7 Build(s)

SBC for Netarchy's 4.2.2 More Aggressive CFS SBC-net-4.2.2-more-havs-cfs-v7.zip (2.9 MB)
SBC for Netarchy's 4.2.2 Less Aggressive CFS SBC-net-4.2.2-less-havs-cfs-v7.zip (2.9 MB)
SBC for Netarchy's 4.2.2 Non-Havs CFS SBC-net-4.2.2-nonhavs-cfs-v7.zip (2.9 MB)

SBC for Netarchy's CFS More Aggressive 4.2.1 (aka 131) 131.zip (2.91 MB)
SBC for Netarchy's CFS Non Havs 4.2.1 (aka 132) 132.zip (2.91 MB)

SBC for Netarchy's CFS More Aggressive 4.1.9.1 SBC-net-4.1.9.1-more-havs-v7.zip (2.9 MB)
SBC for Netarchy's CFS Non-Havs 4.1.9.1 SBC-net-4.1.9.1-non-havs-v7.zip (2.9 MB)

AOSP Builds

v7
12/25/10 - SBC for BC's Kernel SBC-bcnice-stable-v7.zip (2.62 MB)
This is what I'm currently using at the moment. So this gets all the updates as of right now.


v8-BETA
12/25/10 - SBC for BC's Kernel SBC-bcnice-stable-v8.zip (2.62 MB)
This is what I've been testing for a while. This build contains auto bump charging based on the voltage as opposed to the full charge method. I don't know how it works on extended batteries yet...but works pretty good on stock batteries. With this, you should have a better chance of picking up the phone at higher voltages.

Check out Savaged-Zen!
The Following 106 Users Say Thank You to ms79723 For This Useful Post: [ View ] Gift ms79723 Ad-Free
17th December 2010, 09:05 AM |#3  
timdawgdentist's Avatar
Senior Member
Flag Rancho Cucamonga
Thanks Meter: 11
 
More
First...... anyways thanks for the updated kernel. I have been waiting for this.


second are you working on the screen on issue or whatever you want to call it.

thanks

tim
The Following User Says Thank You to timdawgdentist For This Useful Post: [ View ] Gift timdawgdentist Ad-Free
17th December 2010, 09:15 AM |#4  
ms79723's Avatar
OP Senior Member
Thanks Meter: 632
 
More
Didn't get the 3rd post so this will have to do...

FAQ's

Q: Can I use my phone while on the charger?
A: Yes! I was saying not to because I was mixed up for a bit. You can in fact use it on the charger. There is just the chance that you will raise the voltage and turn off the charger. But that has been fixed in the v3 builds. So its all good now

Q: Do I need to flash build 130-132 before flashing SBC?
A: You only need to flash one kernel. Either 130-132 or SBC

Q: What should I look out for to see if it's working?
A: First, grab "battery monitor widget" from the Market (it's free). Then place the widget anywhere on your homescreen and open it up. Change the update interval to 50 secs. Then just charge as usual. When you've hit 100% just wait a while afterwards (2-5mins). Then open up the widget and go into the history section. You should see nothing but positive mA's. Positive mA's mean that you are still charging even though you are past 100%. That's a good thing. That means its still charging. Now, charge overnight. When you wake up in the morning do the same thing, check your history. If you see any negative mA's, that is not good. That means that the phone still couldve been charging, but something is acting in the background and doing some work. If you still get negative mA's on the v3 builds, shoot me a pm and we'll work it out.

Q: How should I flash this?
A: Flash it like you would normally flash any other kernel.
1.Wipe Cache & Dalvik.
2. Flash Kernel
3. Reboot

-------------------------------
Some few tips here and there...

All of the Sense kernels work great with all Sense roms. The AOSP kernels should work well with AOSP. I can't test that because I'm not on AOSP. SBC charging works great in all kernels with AC. SBC USB charging is not in all kernel builds, only the v2 and v3 builds.


information on CFS/BFS/HAVS/No-HAVS etc etc...check this thread out!
The Following 27 Users Say Thank You to ms79723 For This Useful Post: [ View ] Gift ms79723 Ad-Free
17th December 2010, 09:20 AM |#5  
verse187's Avatar
Senior Member
Flag Cali Baby
Thanks Meter: 14
 
Donate to Me
More
NIce Thanks
17th December 2010, 11:06 AM |#6  
Senior Member
Thanks Meter: 5
 
More
I have an extended battery and it's kind of irritating to have to do the whole turn off, charge til green, unplug, charge til green, over and over to take full advantage of the extended battery. If you get this to work on extended batteries I will buy you a beer!
The Following User Says Thank You to toneman1984 For This Useful Post: [ View ] Gift toneman1984 Ad-Free
17th December 2010, 01:30 PM |#7  
NewZJ's Avatar
Senior Member
Flag Seattle, Wa
Thanks Meter: 468
 
More
on charger with green light for 7hrs, screen on, phone awake, off charger for 5 min still at 100%

edit, stayed at 100 for 30 min, has been at 99 for almost an hour
17th December 2010, 02:25 PM |#8  
CheesyNutz's Avatar
Senior Member
Flag Springfield
Thanks Meter: 3,368
 
More
nice thx ! would love to see this on CM6
17th December 2010, 02:32 PM |#9  
Unknownforce's Avatar
Retired Recognized Developer
Thanks Meter: 4,309
 
Donate to Me
More
Can you possibly do this with a non-HAVS based kernel or the "less agressive" undervolting one? Myself along with a lot of others have evo's that do not play well with undervolting and would like to use this tweak...
17th December 2010, 02:33 PM |#10  
cmart4's Avatar
Senior Member
Flag Prosper, TX
Thanks Meter: 241
 
More
thank you, this makes an awesome kernal even more so.
17th December 2010, 02:36 PM |#11  
cj2566's Avatar
Senior Member
Flag Scottsbluff
Thanks Meter: 83
 
Donate to Me
More
Quote:
Originally Posted by CheesyNutz

nice thx ! would love to see this on CM6

Amen!!!!!!!!
Post Reply Subscribe to Thread

Tags
131 kernel hall of fame!, babyturtleslappinkernel, bitch stole mah cheetos!, cornerstone contribution, fear uncertainty doubt, just sayin, kernel goodness, pwns ziggys, retards of xda in here, sbckillsbabies, u.ppl.know.nothing, ziggy is overrated, ziggys kernels are better

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes